TWO TREES SK1 FDM High Speed 3D Printer Instruction Manual
- May 16, 2024
- TWO TREES
Table of Contents
SK1
3D PRINTER
SK1 FDM High Speed 3D Printer
Note: The picture is for reference only, the actual product shall prevail
A LETTER TO A CLIENT
Dear Customer:
Thank you for choosing our brand.
We have always been customer-oriented, continuous innovation, the pursuit of
excellence, so that everyone can have a rich experience in the use of the
process.
I hope you enjoy your time with the two trees.
If you have any questions, please feel free to contact our customer service of
each purchase platform.
Other contact channels are:
Website: www.twotrees3d.com
After-sales Email: service@twotrees3d.com
Consultation Email: info@twotrees3d.com
We will contact you within 24 hours.
Wish you a happy life!
The Two Trees team
MATTERS NEEDING ATTENTION
- After unpacking, please remove the corresponding fixation of XYZ axis according to the instructions to avoid damage caused by forced movement of the machine.
- Confirm whether the voltage gear of the machine is matched before starting the machine to avoid damage to the machine power supply due to the mismatch of voltage gear.
- The printer has 110VAC / 230VAC and other high voltage power interfaces. Do not use any other power cord other than the one provided. Use approved power cords and sockets to ensure power cords are not damaged.
- Do not place the printer in a large vibration or other unstable environment, the machine shake will affect the printer print quality. It is recommended to place it in a well-ventilated and low-dust environment to avoid over-heating of the machine.
- Risk of scalding: Do not touch the nozzle and hot bed when the printer is working to prevent high tempera-ture scalding. After printing, timely using the residual temperature of the nozzle to clean the consumables up on the nozzle with the help of tools, and do not touch the nozzle with your hands directly during cleaning to prevent scalding.
- When the machine is running, please stay away from the parts in operation, and avoid poking your fingers or other objects into the inside of the running printer to prevent injury.
- Adult supervision: ensure that children do not have access to the machine, so as not to cause personal acci-dents.
- Do regular product maintenance: regularly in the case of power failure, use dry cloth to clean the printer body, wipe dust and bonded printing materials, please lubricate and maintain the guide rail regularly.
- In case of emergency, please turn off the power directly.
ABOUT YOUR PRINTER
FUNCTION DEFINITION
| Serial number | Interface | Function definition |
|---|---|---|
| 1 | Internet | |
| Interface | Ethernet port for network cable connection | |
| 2 | USB3.0 Interface | Connect USB flash drive Connect wireless card Connect PC |
| 3 | USB2.0 Interface | Connect USB flash drive Connect wireless card Connect PC |
| 4 | Screen | |
| Interface | Used to expand other screen sizes, |
RJ11 type interface
5| Power
Interface| Connect AC power supply
MACHINE PARAMETERS
|
---|---
Model :SK1| Motion structure :Core XY
Color: Black| Printing mode: USB / LAN /Wifi-2.4G HZ
Nozzle Number :1| Display screen: 4.3-inch IPS capacitive touch color screen
(480’272)
Print size :254x254x254mm| Firmware type :Klipper Open source
Printing accuracy :i–0.1mm| Filament :PLA \ PETG \ ABS \ ASA \ TPU \ PC \
UltraPA
XY axis accuracy :0.0025mm| Nozzle diameter: 0.4mm
Z-axis accuracy :0.0025mm| Filament diameter:1.75mm
Maximum speed :700mm/s| Slicing software :Ultima ker Cura, Prusaslicer,
Lycheeslicer, Simplify3D, etc
Maximum acceleration :20000mm/s| Print file format: G-code
Software language: Chinese \ English \ Spanish \ German \ French \ Russian |
Supported system :MacOS\Windows\Linux
Nozzle temperature (Max.) : 300 C| Hot bed temperature (Max.) :100 C
Power parameters: 230V/110V 350W| Working environment: Temperature: 5-40 C;
Humidity: 20-60% RH
Best working environment :20 C -40 C|
ACCESSORIES LIST
THE MACHINE ASSAEMBLE
-
Remove the Z-axis fixation Cup head screws M3’6X2
-
Remove the XY axis fixings
-
Install the filament rack Half round head screw M4’8X2 Filament rack X1
-
Install the 4.3-inch screen module
a. Install the Screen holder X1 Half-round head screws M3’6X2
b. Before installation, insert the reserved screen cable into the terminal block, and then push the screen assembly along the chute into the corresponding slot of the bracket, then the installation is complete.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
TEL: +0086-0755-23987110
Http: www.twotrees3d.com
E-mail: service@twotrees3d.com
Facebook: https://www.facebook.com/twotrees3d
Address: Room 402, Building 11, No.9 Qilin Road, Nankeng Community,
Bantian Street, Longgang District, Shenzhen, Guangdong, China, 518000