Porta Phone EVX2M Full Duplex 2.4 GHz Transceiver Instructions
- September 6, 2024
- PORTA PHONE
Table of Contents
EVADE
USER MENU
EVX2M Full Duplex 2.4 GHz Transceiver
HVIN: EVX2-MS, EVX2-MD
-
Power ON/OFF
Power ON: Press and hold the power button till to GREEN LED blinking or light up.
Power OFF: Press and hold the power button till to the RED LED flashing. -
Pairing (Register mode)
a). Press and hold the power button to turn headset power ON, the power LED should blinking in Green color.
b). Enter the pairing mode: Press the volume down button at 3 times continually, then press and hold thevolume up till to the RED and Green LED blinking at alternately.
c). Main unitenter the pairing mode first then also the Remote to pairing mode.
d). The Green LED of Remote headset will several blink fastly then turn off after paired, press the power button to quitthe pairing mode, keep the Main unit on the pairing mode then can pair with more Remote or press the power button to quit the pairing mode.
e). Repeat the above step “d” for more Remote headset paired with the same Master, or press the powerbutton to finish the pairing(register).
( Note: ①. The Mani headset can accept maximum 8 remotes register in full duplex, or all the remotes fixed on listening mode, total register number over 250 headset available on listening mode. -
Talking and listening
a). The Main and Remote headset will start to search each other after power ON, the GREEN LED flash 1 time each 3 seconds. The headset will be link together automatically when the pairing ID confirmed by master and LED turn ON in GREEN color.
b). Press the volume up and down button to adjust headset speaker sound volume. -
Mic Muted
The headset Microphone stopped automatically when the Mic boom swivel up.
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
ISED Warning
This device complies with Innovation, Science, and Economic Development
Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement:
The device has been tested and comply with FCC/ISED SAR limits.
To prevent possible hearing damage, do not listen at high volume levels for long periods
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>