VODALAND 8100-M Easy Pave Permeable Paving Grid Instructions

August 27, 2024
VODALAND

VODALAND 8100-M Easy Pave Permeable Paving Grid Instructions

EasyPave Grass fill (Light Loads)

NOTES:

  1. Layers shown in cross-section need to be compacted.

  2. Seeding: Fill the soil or growing area to the top of the grid.
    Apply seeding based on the instructions of the supplier.

  3. Sodding : Fill Topsoil to half the height of the grid.
    Press sod within the grid so that the grid’s top is levelled with the soil and roots.
    Only the grass’s leaves should be extending above the grid.

  4. Anchors are recommended for sloped installations.
    Please follow guidance of your local engineer for slope requirements.

  5. This drawing is for conceptual design and information use only.

Application

Residential walkways, Pedestrian Zones, Erosion Control, Slope Stabilisation

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETRES SURFACE FINISH TOLERANCES LINEAR ANGULAR| FRESH| DEBUGGER AND BREAK SHARP EDGES| NOT SCALE DRAWING| REVISION
---|---|---|---|---
| NAME| SIGNATURE| DATE| TITLE
Easy Pave Grass fill (Light Loads
DRAWN| | | |
CHK’D| | | |
APPV’D| | | |
APPV’D| | MATERIAL
Plastic| ARTICLE
8100-M|

EasyPave Grass fill (Heavy Loads)

NOTES:

  1. The base height shown in the cross-section depends on specific site and loading conditions.
  2. Layers shown in cross-section need to be compacted.
  3. Seeding: Fill the soil or growing area to the top of the grid. Apply seeding based on the instructions of the supplier.
  4. Sodding: Fill Topsoil to half the height of the grid. Press sod within the grid so that the grid’s top is levelled with the soil and roots. Only the grass’s leaves should be extending above the grid.
  5. Geo-textile is to be used for stability and to prevent mixing between layers.
  6. Anchors are recommended for sloped installations. Please follow guidance of your local engineer for slope requirements.
  7. This drawing is for conceptual design and information use only.

Application

Permeable Grass Parking lots, Parking Pads, Driveways, Erosion Control

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETRES SURFACE FINISH TOLERANCES LINEAR ANGULAR| FRESH| DEBUGGER AND BREAK SHARP EDGES| NOT SCALE DRAWING| REVISION
---|---|---|---|---
| NAME| SIGNATURE| DATE| TITLE
Easy Pave Grass fill (Light Loads
DRAWN| | | |
CHK’D| | | |
APPV’D| | | |
APPV’D| | MATERIAL
Plastic| ARTICLE
8100-M|

Easy Pave Grass fill (Heavy Loads)

NOTES

  1. The base height shown in the cross-section depends on specific site and loading conditions.
  2. Layers shown in cross-section need to be compacted.
  3. Seeding: Fill the soil or growing area to the top of the grid. Apply seeding based on the instructions of the supplier.
  4. Sodding: Fill Topsoil to half the height of the grid. Press sod within the grid so that the grid’s top is levelled with the soil and roots. Only the grass’s leaves should be extending above the grid.
  5. Geo-textile is to be used for stability and to prevent mixing between layers.
  6. Anchors are recommended for sloped installations. Please follow guidance of your local engineer for slope requirements.
  7. This drawing is for conceptual design and information use only.

Application

Commercial Parking Lots, Emergency & Fire Lanes, Service Roads

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETRES SURFACE FINISH TOLERANCES LINEAR ANGULAR| FRESH| DEBUGGER AND BREAK SHARP EDGES| NOT SCALE DRAWING| REVISION
---|---|---|---|---
| NAME| SIGNATURE| DATE| TITLE
Easy Pave Grass fill (Light Loads
DRAWN| | | |
CHK’D| | | |
APPV’D| | | |
APPV’D| | MATERIAL
Plastic| ARTICLE
8100-M|

Easy Pave Gravel fill (Light Loads)

NOTES:

  1. Layers shown in cross-section need to be compacted.
  2. Anchors are recommended for sloped installations.
  3. Please follow guidance of your local engineer for slope requirements.
  4. This drawing is for conceptual design and information use only.

Application

Residential walkways, Pedestrian Zones, Erosion Control, Slope Stabilisation

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETRES SURFACE FINISH TOLERANCES LINEAR ANGULAR| FRESH| DEBUGGER AND BREAK SHARP EDGES| NOT SCALE DRAWING| REVISION
---|---|---|---|---
| NAME| SIGNATURE| DATE| TITLE
Easy Pave Grass fill (Light Loads
DRAWN| | | |
CHK’D| | | |
APPV’D| | | |
APPV’D| | MATERIAL
Plastic| ARTICALE
8100-M|

Easy Pave Gravel fill (Medium Loads)

NOTES:

  1. The base height shown in the cross-section depends on specific site and loading conditions.
  2. Layers shown in cross-section need to be compacted.
  3. Geo-textile is to be used for stability and to prevent mixing between layers.
  4. Anchors are recommended for sloped installations. Please follow guidance of your local engineer for slope requirements.
  5. This drawing is for conceptual design and information use only.

Application

Permeable Parking lots & Driveways, Paddocks, Shed Bases, Outdoor warehousing

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETRES SURFACE FINISH TOLERANCES LINEAR ANGULAR| FRESH| DEBUGGER AND BREAK SHARP EDGES| NOT SCALE DRAWING| REVISION
---|---|---|---|---
| NAME| SIGNATURE| DATE| TITLE
Easy Pave Grass fill (Light Loads
DRAWN| | | |
CHK’D| | | |
APPV’D| | | |
APPV’D| | MATERIAL
Plastic| ARTICALE
8100-M|

Easy Pave Gravel fill (Heavy Loads)

NOTES:

  1. The base height shown in the cross-section depends on specific site and loading conditions.
  2. Layers shown in cross-section need to be compacted.
  3. Geo-textile is to be used for stability and to prevent mixing between layers.
  4. Anchors are recommended for sloped installations. Please follow guidance of your local engineer for slope requirements.
  5. This drawing is for conceptual design and information use only.

Application

Heavy Load Parking Lots, Emergency & Fire Lanes, Service Roads

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETRES SURFACE FINISH TOLERANCES LINEAR ANGULAR| FRESH| DEBURR AND BREAK SHARP EDGES| NOT SCALE DRAWING| REVISION
---|---|---|---|---
| NAME| SIGNATURE| DATE| TITLE
Easy Pave Grass fill (Light Loads
DRAWN| | | |
CHK’D| | | |
APPV’D| | | |
APPV’D| | MATERIAL
Plastic| ARTICALE
8100-M|

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals