VODALAND Open Slot 150PC 6 Inch Polymer Concrete Trench Drain Owner’s Manual

August 28, 2024
VODALAND

VODALAND Open Slot 150PC 6 Inch Polymer Concrete Trench Drain

Product Specifications

  • Product Name: Open Slot 150PC System – Load Class C250
  • Product Type: Polymer Concrete Trench Drain
  • Length: 39.4″ (1000mm)
  • Width: 6″ (150mm)
  • Height: 2″ (50mm)
  • Load Class: C250
  • Compressive Strength: 14,000 psi
  • Flexural Strength: 4,000 psi
  • Tensile Strength: 1,500 psi
  • Water Absorption: 0.05%
  • Frost Proof: Yes
  • Acid and Alkali Resistant: Yes

Product Usage Instructions

Installation

  1. Prepare the installation area by ensuring it is clean and level.
  2. Place the trench drain in the desired location, ensuring proper alignment.
  3. Connect the channels securely using the provided connectors.
  4. Ensure the drain has a slight slope for proper water drainage.
  5. Secure the drain in place using appropriate fasteners.

Maintenance

  1. Regularly inspect the drain for debris accumulation.
  2. Clean the drain by removing any collected debris or sediment.
  3. Check for any signs of damage or wear and address them promptly.

Usage Precautions

  • Avoid heavy impacts on the drain to prevent damage.
  • Do not use corrosive chemicals near the drain as it may affect the material.
  • Ensure proper water flow by keeping the drain clear of obstructions.

FAQ

  • Can the trench drain withstand heavy vehicle traffic?
    Yes, the trench drain is designed to withstand C250 load class according to EN1433, making it suitable for heavy vehicle traffic areas.

  • Is the trench drain resistant to frost?
    Yes, the trench drain is frost-proof, ensuring durability in various weather conditions.

  • How do I connect multiple units of the trench drain?
    Use the provided connectors to securely connect multiple units of the trench drain, ensuring a tight and seamless fit for effective water drainage.

6” (150mm) OPEN SLOT POLYMER CONCRETE TRENCH DRAIN

DIMENSION

General
The trench drain shall be Vodaland Canada Open Slot 150PC as manufactured by Vodaland or approved equal.

Specification

  • Channels shall be 39.4” (1000mm) long with 6” (150mm) overall width and 2” (50mm) tall. Each unit shall have a comb profile and a neutral 0% built in slope. Channels shall have male-to-female interlocking joints.
  • Channels shall withstand C250 load class according to EN1433.

MATERIALS
Open slot 150PC trench drain shall be manufactured from polymer concrete with the following approximate properties:

  • Compressive strength 14,000 psi
  • Flexural strength 4,000 psi
  • Tensile strength 1,500 psi
  • Water absorption : 0.05%
  • Frost proof : Yes
  • Dilute acid and alkali resistant: Yes
  • Salt proof: Yes

Open Slot 150PC trench drain

Name Article Н, in H, mm W, lb
Open Slot 150PC trench drain 720 2.0 50 27.8
Open Slot 150PC trench drain with vertical outlet* 72009 2.0 50 24.2

Drainage performance:

  1. 0.1% slope – 0.64 L/s
  2. 0.5% slope – 1.44 L/s
    Notes:
    *Channels can be equipped with Ø110mm bottom outlet

6” (150mm) OPEN SLOT POLYMER CONCRETE TRENCH DRAIN, ADAPTOR

DIMENSION

General:
The trench drain adaptor shall be Vodaland Open Slot 150PC adaptor as manufactured by Vodaland or approved equal.

Specification:
Adaptor shall be 6.25” (158mm) long with 6.13” (154mm) overall width and 2” (50mm) tall. Space between slot shall be 0.75” (17.5mm). Each unit shall have a comb profile. Adaptor shall have male-to-female interlocking joints. The adaptor features three way connection allowing the trench drain to be connected in a T format. Adaptor shall withstand a load class according to EN1433.

MATERIALS
Open slot 150PC trench drain shall be manufactured from polymer concrete with the following approximate properties:

  • Compressive strength 14,000 psi
  • Flexural strength 4,000 psi
  • Tensile strength 1,500 psi
  • Water absorption: 0.05%
  • Frost proof: Yes
  • Dilute acid and alkali resistant : Yes
  • Salt proof: Yes
    Name| Article| Н, in| H, mm| W, lb
    ---|---|---|---|---
    Open Slot 150PC adapter| 6720| 2.0| 50| 3.31

6” (150mm) OPEN SLOT POLYMER CONCRETE TRENCH DRAIN, STEEL (GALVANIZED OR

STAINLESS STEEL), TRAP

DIMENSION

General:
The trench drain trap shall be Vodaland Open Slot 150PC Trap as manufactured by Vodaland or approved equal.

Specification:
The trap shall be 5.8” (150mm) square with 3.4” (87mm) tall. Space between slot shall be 0.75” (17.5mm). Each unit shall have a comb profile. The trap shall be used as connection point in L- and T- shape to turn the line. The adaptor features three way connection allowing the trench drain to be connected. Adaptor shall withstand a load class according to EN1433.

Name Article Н, in H, mm
6” Galvanized steel trap (inline) w/oulet 1291510-9 3.4 87
6” Galvanized steel trap (end) w/oulet 1291510 3.4 87
6” Galvanized steel trap (t-shaped connection) 1291500-T 2.0 50
6” Galvanized steel trap (t-shaped connection) w/outlet 1291510-T 3.4 87
6” Galvanized steel trap (I-shaped connection) 1291500-T 2.0 50
6” Galvanized steel trap (I-shaped connection) w/outlet 1291510-T 3.4 87
6” Stainless steel trap (inline) w/oulet 1291511-9 3.4 87
6” Stainless steel trap (end) w/oulet 1291511 3.4 87
6” Stainless steel trap (t-shaped connection) 1291501-T 2.0 50
6” Stainless steel trap (t-shaped connection) w/outlet 1291511-T 3.4 87
6” Stainless steel trap (I-shaped connection) 1291501-T 2.0 50
6” Stainless steel trap (I-shaped connection) w/outlet 1291511-T 3.4 87

System accessories

Name Article Н, in H, mm
6” Galvanized steel end cap 6121-1 2.0 50
6” Stainless steel end cap 6921-1 2.0 50
6” Polymer concrete end cap 6721-1 2.0 50

ABOUT COMPANY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals