VODALAND OPEN SLOT 150PC Trench Drain Installation Guide

VODALAND OPEN SLOT 150PC Trench Drain

Specifications

• Product Name: Open Slot 150 System – Load Class 250
• Material: Polymer Concrete
• Load Class: Class C
• Encasement Depth: 6″ (150mm)
• Encasement Width: 6″ (150mm)
• Overall Dimensions: 39.4″ (1000mm) long, 6″ (150mm) wide, 2″ (50mm) tall

Properties

• Compressive Strength: 14,000 PSI
• Flexural Strength: 4,000 PSI
• Tensile Strength: 1,500 PSI
• Water Absorption: 0.05%
• Frost Proof: Yes
• Dilute Acid and Alkali Resistant: Yes
• Salt Proof: Yes

Product Usage Instructions

Installation

1. The specifier is responsible for concrete encasement and reinforcing based on application and local codes.
2. Expansion and contraction control joints and reinforcement are recommended to protect the channel and concrete surround. Engineering advice may be required.
3. Consult with the manufacturer for installation instructions as the installation scheme provided is a recommendation.
4. If the trench drain system has a vertical outlet at the end of the run, add an additional 4″ (100mm) of concrete encasement after the end cap.
5. The finished level of the concrete surround should be 1/8 – 3/16″ (3-5mm) above the top of the drain.

General Notes

The trench drain shall be Vodaland Canada Open Slot 150PC as manufactured by Vodaland or approved equal.

FAQ

• Q: What should I do if I need to deviate from the recommended installation scheme?
• A: Any deviation or partial system design and/or improper installation will void any and all warranties provided by Vodaland Canada Inc.

OPEN SLOT 150 SYSTEM – LOAD CLASS С250
EXPOSED CONCRETE PAVEMENT INSTALLATION

6” (150mm) OPEN SLOT POLYMER CONCRETE TRENCH DRAIN

__

PARAMETER

| LOAD CLASS
---|---
CLASS C
__

CONCRETE ENCASEMENT DEPTH (A), in

| __

6” (150mm)

__

CONCRETE ENCASEMENT WIDTH (C), in

| __

6” (150mm)

NOTES

1. SPECIFIERS ARE RESPONSIBLE FOR CONCRETE ENCASEMENT AND REINFORCING BASED ON APPLICATION AND LOCAL CODES.
2. EXPANSION AND CONTRACTION CONTROL JOINTS AND REINFORCEMENT ARE RECOMMENDED TO PROTECT CHANNEL AND CONCRETE SURROUND. ENGINEERING ADVICE MAY BE REQUIRED.
3. THIS INSTALLATION SCHEME IS A RECOMMENDATION. CONSULT WITH THE MANUFACTURER FOR INSTALLATION INSTRUCTIONS.
4. IF THE TRENCH DRAIN SYSTEM HAS A VERTICAL OUTLET AT THE END OF THE RUN, IT IS NECESSARY TO ADD AN ADDITIONAL 4” (100mm) OF CONCRETE ENCASEMENT AFTER THE END CAP.
5. THE FINISHED LEVEL OF CONCRETE SURROUND SHOULD BE 1/8” – 3/16” (3-5mm) ABOVE THE TOP OF THE

GENERAL

• THE TRENCH DRAIN SHALL BE VODALAND CANADA OPEN SLOT 150PC AS MANUFACTURED BY VODALAND OR APPROVED EQUAL.

SPECIFICATION

• CHANNELS SHALL BE 39.4” (1000MM) LONG WITH 6” (150MM) OVERALL WIDTH AND 2” (50MM) TALL.
• EACH UNIT SHALL HAVE A COMB PROFILE & BUILT-IN NEUTRAL SLOPE AS PER SPECIFIER’S REQUIREMENTS. EACH
• UNIT WILL FEATURE FEATURE MALE-TO-FEMALE INTERLOCKING JOINTS. CHANNELS SHALL WITHSTAND A REQUIRED EN1433 LOAD CLASS.

MATERIALS

OPEN SLOT 150PC TRENCH DRAIN SHALL BE MANUFACTURED FROM POLYMER CONCRETE WITH THE FOLLOWING APPROXIMATE PROPERTIES

• COMPRESSIVE STRENGTH: 14,000 PSI
• FLEXURAL STRENGTH:4,000 PSI
• TENSILE STRENGTH:1,500 PSI
• WATER ABSORPTION: 0.05%
• FROSTPROOF: YES
• DILUTE ACID AND ALKALI RESISTANT; YES
• SALT PROOF: YES

THE COMPLETE DRAINAGE SYSTEM SHALL BE BY VODALAND CANADA INC. ANY DEVIATION OR PARTIAL SYSTEM DESIGN AND/OR IMPROPER INSTALLATION WILL VOID ANY AND ALL WARRANTIES PROVIDED BY VODALAND CANADA INC.

CHECK AND SPECIFY APPROPRIATE OPTIONS

| Name| Article| Н, in| H,

mm

---|---|---|---|---
| 6” Galvanized steel end cap| 6121-1| 2.0| 50
| 6” Stainless steel end cap| 6921-1| 2.0| 50
| 6” Polymer concrete end cap| 6721-1| 2.0| 50
| 6” Galvanized steel trap (inline) w/oulet| 1291510-9| 3.4| 87
| 6” Galvanized steel trap (end) w/oulet| 1291510| 3.4| 87
| 6” Galvanized steel trap (t-shaped connection)| 1291500-T| 2.0| 50
| 6” Galvanized steel trap (t-shaped connection) w/outlet| 1291510-T| 3.4| 87
| 6” Galvanized steel trap (I-shaped connection)| 1291500-T| 2.0| 50
| 6” Galvanized steel trap (I-shaped connection) w/outlet| 1291510-T| 3.4| 87
| 6” Stainless steel trap (inline) w/oulet| 1291511-9| 3.4| 87
| 6” Stainless steel trap (end) w/oulet| 1291511| 3.4| 87
| 6” Stainless steel trap (t-shaped connection)| 1291501-T| 2.0| 50
| 6” Stainless steel trap (t-shaped connection) w/outlet| 1291511-T| 3.4| 87
| 6” Stainless steel trap (I-shaped connection)| 1291501-T| 2.0| 50
| 6” Stainless steel trap (I-shaped connection) w/outlet| 1291511-T| 3.4| 87
| Open Slot 150PC adapter| 6720| 2.0| 50

CONTACT

• 1-5900 Ambler Dr, Mississauga, ON L4W 2N3
• Phone: 905-238-1771
• Email: info@vodaland.ca

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>