ALL LED APAC06 Aluminium Flexible Channel Instruction Manual

: August 28, 2024
: ALL LED

Table of Contents

ALL LED APAC06 Aluminium Flexible Channel
Product Specifications
Product Usage Instructions
FAQ
Product Overview
Dimensions
INSTALLATION DIAGRAM
Safety
Returns & Faulty Items
GUARANTEE
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ALL LED APAC06 Aluminium Flexible Channel

PLEASE READ BEFORE USE!

Product Specifications

Brand: All LED
Guarantee: Limited 2-year warranty
Maximum Bend Radius: 152.4 mm
Components: Aluminium Bracket, Mounting Clip, Diffuser

Product Usage Instructions

Safety

Always follow safety guidelines provided in the user manual.
Ensure correct installation and usage to prevent accidents.

Installation

Refer to the installation diagram provided in the manual for step-by-step instructions. Use the included components: Aluminium Bracket, Mounting Clip, and Diffuser.

Returns & Faulty Items

If you encounter any faults with the product, contact the manufacturer for returns or replacements. Obtain return authorization upon written request.

Environmental Protection

Do not dispose of waste electrical products with household waste. Please recycle where facilities exist. Contact your Local Authority or retailer for recycling advice.

Guarantee

This product comes with a limited 2-year guarantee, subject to terms and conditions.
The manufacturer is not liable for damages caused by faults, defects, misuse, or incorrect installation.

FAQ

Q: What should I do if I encounter a faulty item?
- A: Contact the manufacturer for returns or replacements. Obtain return authorization upon written request.
Q: How should I dispose of waste electrical products?
- A: Do not dispose of them with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
Q: What is the maximum bend radius for this product?
- A: The maximum bend radius is 152.4 mm.

Product Overview

Dimensions

Dimensions (mm)

INSTALLATION DIAGRAM

ATTENTION: IF ANY PROBLEMS PERSIST, PLEASE CALL THE ALL LED TECHNICAL DEPARTMENT FOR FURTHER ASSISTANCE.

Safety

Do not cover the luminaire, hang or fasten anything from it.
Do not operate if any visible damage can be seen to the product.
Do not operate if any water ingress has occurred.
Do not operate if any smoke, steam or crackling noises can be heard from the luminaire.
Do not operate if any signs of overheating are recognised.
Avoid installation in any areas where there is a risk of strong mechanical loads.
Do not place any material over the lens or LED diode/chip.
Do not insert objects into the luminaire.
Do not clean using any solvent based abrasive or aggressive product.
Do not pull any cables connected to the product.
Do not direct the luminaire into a persons eyes, as this unit may have an intense light output, which if incorrectly used may cause eye damage.
Light engines/LEDs and other light sources may heat up, please take care when handling the products.
The manufacturer will not be deemed liable or held responsible for any damages caused by faults or manufacturing defects that may be present in any of its products or the misuse or incorrect installation of this device. Please refer to our troubleshooting guide for further information.
The manufacturer will not be held liable for any death(s) or injuries caused by misuse or poor installation or any unreported faults of this product version or versions thereof.
LEDs are sensitive to electrostatic discharge. Do not touch the surface of the LED module.
Do not connect to a temporary electricity supply, this may damage the electronics.
Light fittings with an integrated emergency option come with a separate installation and wiring leaflet.
Please refer to this manual for further details. If the manual is unavailable please contact an ALL LED representative for assistance.
It is strongly recommended that a Residual-Current Device (RCD) is used with this product to minimise the risk of electrocution.
REPLACE DAMAGED PRODUCT IMMEDIATELY.
Keep away from children.

Returns & Faulty Items

If any problem is encountered during or after installation, please call the ALL LED technical department to get the problem resolved ASAP.
Please do not just return the item to the outlet you purchased it from, as you are only entitled to a replacement or refund after the unit has undergone testing and the unit has been confirmed as having a manufacturing defect/fault. Your statuatory rights are not affected.
The manufacturer will not be deemed liable or held responsible for any damages caused by faults or manufacturing defects that may be present in any of its products or the misuse or incorrect installation of this device. Please refer to our troubleshooting guide for further information.
All installations must be carried out in accordance with this installation guide and user manual.
All goods are supplied under the terms and conditions of ALL LED LTD, a copy of which may be obtained upon written request.

Environmental Protection

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.

WARNING: ISOLATE MAINS SUPPLY BEFORE HANDLING ANY ELECTRICAL PRODUCTS.

GUARANTEE

GUARANTEE 2 YEARS

This product is supplied with a limited 2 year guarantee, subject to terms and conditions.
The manufacturer will not be deemed liable or held responsible for any damages caused by faults or manufacturing defects that may be present in any of its products or the misuse or incorrect installation of this device. Your statuatory rights are not affected.