NICREW Multi-Colored LED Bubbler Instruction Manual

NICREW Multi-Colored LED Bubbler

Introduction

Beautiful underwater lighting effects are created with the LEDs, while bubbles improve the circulation and oxygenation of the water. Don’t forget a check valve to prevent back siphoning and always make a drip loop for safety. Requires air pump to operate, not included.

Features

• Provides an additional light source, as well as necessary oxygen.
• LEDs and an airstone combined in a single decor piece.
• Use suction cup or gravel to anchor the bubbler.
• Looks great in a darker corner of an aquarium.
• Airline Tubing included.

Technical Information

Color/Dia.| LEDs| Wattage| Suggested Air Pump Size| Power Cord Length
---|---|---|---|---
Multi-Color 2″| 12| 1.5 W| 3 L/mi| 5 ft.
Multi-Color 4″| 12| 1.5 W| 3 L/mi| 5 ft.

Installation/Operation

• Choose a location in your aquarium for the LED bubbler. If placing on the aquarium bottom, remove all gravel and debris from chosen location. Keeping the cord in place with suction cup. DO NOT submerge female transformer connector in aquarium water.
• Connect the airline tubing to airline inlet on the LED bubbler.
• Connect opposite end of airline tubing to air pump. Follow manufacturer’s instructions, warnings and safeguards when installing air pump.
• Connect female transformer connector on LED bubbler to male transformer connector on transformer.
• Plug in air pump power cord and LED bubbler transformer into a G.F.C.I outlet utilizing a drip loop.

Note:
To achieve the desired amount of air bubbles, either insert a control valve in the airline tubing, or purchase an air pump with adjustable airflow.

Helpful Tips

• Allow Bubble Disk to soak for one hour before turning on air supply.
• If algae buildup reduces airflow after extended use, remove bubble disk from aquarium and clean surface with a stiff brush.
• Use more powerful air pump if the bubbler is not equally distributing.
• For suction cups to adhere properly, the surface must be completely clean.

Note:
The volume and pressure output of your air pump will determine how large an area of the disk will release bubbles.

Maintenance

• Every week, remove gravel or debris that may have covered the airstone to ensure best possible performance.
• Every week, use a soft, non-abrasive cloth to remove any algae buildup on LED lights and airstone.
• Periodically check airline tubing to make sure no water, debris or condensation has settled in. If there are any obstructions, remove airline tubing, soak in a 50-50 vinegar-water solution for 10 minutes. Rinse thoroughly with room-temperature water and allow to air dry completely. Re-attach airline tubing.

Note:

• Do not dispose of this product as normal household waste.
• Take it to your local refuse collection site.

12-month warranty

For 12 months after the date of purchase, we take care of all quality related issues with a REPLACEMENT or FULL REFUND including covering the return shipping cost within the country of purchase.

30 Days Worry-Free Money Back Guarantee:
Within the first 30 days of your purchase, you can return your product for a full refund .

30 Days to 12 Months:
If your product fails due to a manufacturer fault, We will replace your defective unit with a brand new one.

If your product is within warranty and you require a replacement part or service, please contact us at support@nicrew.com.
For more information, please visit www.nicrew.com.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>