FANATEC P1919C CSL Steering Wheel BMW Owner’s Manual
- June 6, 2024
- FANATEC
Table of Contents
.
Quick Guide
Video Manual| Driver Download| Driver & Firmware
Instruction Manual
---|---|---
PACKAGE CONTENT
STEERING WHEEL ATTACHMENT
CENTRE CALIBRATION
SHIFTER CALIBRATION
Sold separately
MODES
TUNING OPTIONS
BUTTON INSERTS
QUICK-RELEASE ATTACHMENT
BUTTON MAPPING
| # | PC | PlayStation ® |
|---|---|---|
| 1 | 8 | L2 |
| 2 | 7 | R2 |
| 3 | 12 | *GSB 1 |
| 4 | 11 | *GSB 2 |
| 5 | 10 | |
| 6 | 9 | |
| 7 | 2 | Χ |
| 8 | 3 | 0 |
| # | PC | PlayStation ® |
| --- | --- | --- |
| 9 | 1 | |
| 10 | 2 | **** |
| 11 | 27 | *GSB 3 |
| 12 | 22 | PS |
| 13 | 6 | L1 |
| 14 | 5 | R1 |
| 15 |
* GSB = Game-Specific Button
SUPPORT
http://fanatec.com/support/faq
The product warranty is provided by Endor AG. Refer to the included warranty sheet as well as the terms & conditions of Endor AG on fanatec.com.
ENDOR products comply with the European Union\ Directive 2011/65/EU and its
amendments, including exemptions for the use of lead such as high-temperature
solder. ENDOR is working to phase out the use of these exempted substances
where technically possible.
Contact I 3131q3aTmcsi: Endor AG E.ON-Allee 3 – 84036 Landshut – Germany
Telephone I Tene4oH: +49 (871) 9221-122 Email I EneKTpoHHa nowTa:
[email protected]
This product meets the requirements of the Technical Regulations which limit
the use of certain hazardous substances in electrical and electronic
equipment.
China RoHS 2
China RoHS 2 refers to the Ministry of Industry and Information Technology
Order No. 32, effective July 1, 2016, titled Management Methods for the
Restriction of the Use of Hazardous Substances in Electrical and Electronic
Products. To comply with China RoHS 2, we determined this product’s
Environmental Protection Use Period (EPUP) to be 10 years in accordance with
the Marking for the Restricted Use of Hazardous Substances in Electronic and
Electrical Products, SJT 11364-2014.
| Part Name | Substances |
|---|
Ca
(Pb)| t
(Hg)| S
(Cd)| ASS
(Cr6+)| ; AIM
(PBB)| (PBDE)
(Connect copper needle)| x| 0| 0| o| o| o
(Enchase nut)| X| o| 0| 0| 0| 0
SEINS4+
(Encoder copper shaft)| x| o| 0| 0| 0| 0
(Other enclosure components)| o| o| o| 0| o| 0
Sit (Shell)| o| o| o| 0| o| o
BICEP,Mtn (PCBA)| o| o| o| o| o| o
This table is prepared in accordance with the provisions of S)/T 11364-2014
0: Indicates that the hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement of GB/r 26572.
X: Indicates that the hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement of
GB/T 26572.
This device complies with part 15 of the FCC rules. The operation of this device is subject to the following two conditions:
- This device may not cause harmful interference and must accept any interference received, including interference that may cause undesired operation.
- This device was not modified differently than described explicitly in this user manual.
NOTE : This device was tested and approved to the limitations for class B
of digital devices according to part 15 of the FCC rules. This limitation
should ensure adequate protection against harmful interferences in residential
areas. However, a warranty for the non-recurring of interferences is not
assumed.
Do not modify the device differently than explicitly described in the product-
related user manual. Nevertheless, if you do modify the device differently
than explicitly described in the product-related manual, you can be determined
to stop the operation of the device.
Imported and distributed by Endor America
LLC
8200 Wilshire Blvd. Suite 200 – Beverly Hills
CA 90211 – USA
US/CAN: +1321-655-3524
Email:[email protected]
Website:www.fanatec.com –
www.endor.ag
The BMW logo, the BMW wordmark and the BMW model designation are trademarks of BMW AG and are used under License.
Manufactured and distributed by
Fanatec
®
is a registered trademark of Endor AG
Designed and developed by Endor AG in Germany
E.ON-Allee 3 – 84036 Landshut – Germany
EU: 00800 0 FANATEC or +49 (871) 9221 -122
US/CANADA: 011 800 0 FANATEC or +49 (871) 9221 -122
AUSTRALIA: 00800 0 FANATEC or +49 (871) 9221 -122
JAPAN: +81 306 7172 -719
Email:[email protected]
Website:www.fanatec.com –
www.endor.ag
Made in China
Documents / Resources
|
FANATEC P1919C CSL Steering Wheel
BMW
[pdf] Owner's Manual
P1919C, CSL Steering Wheel BMW, P1919C CSL Steering Wheel BMW, Steering Wheel
BMW, Wheel BMW, BMW
---|---
References
- Fanatec USA | Fanatec
- app | Fanatec
- Fanatec.com/df-manual-V1
- Driver | Fanatec
- CSL Steering Wheel BMW / P1 V2 Unboxing & Video Guide - YouTube
- Support / FAQ | Fanatec
- Fanatec USA | Fanatec