tommee tippee 1150 Easi Warm Bottle Warmer Instruction Manual
- June 14, 2024
- Tommee Tippee
Table of Contents
bottle warmer instructions for use
1150 Easi Warm Bottle Warmer
IMPORTANT WARNINGS!
These instructions can also be found at
www.tommeetippee.com
Keep this instruction sheet for future reference as it includes important
information.
Children shall not play with the appliance. This appliance is intended for
household use only. Do not use outdoors. Before plugging in the food and
bottle warmer for the first time ensure that the voltage is compatible with
your electricity supply by checking the label on the base of the unit. Ensure
water has been added to the unit before switching the unit on. Do not immerse
in water. To protect against fire, electric shock and injury to persons do not
immerse cord, plugs or other parts of the unit in water or other liquid.
Misuse of the product may result in the risk of fire, electric shock and/or
personal injury. This appliance can be used by persons aged 14 years and above
if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Cleaning and user
maintenance shall not be made by children unless they are aged 14 years and
above and supervised. Keep this appliance and it’s cord out of the reach of
children. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for
their safety. Children do not understand the dangers associated with operating
electrical appliances. Never allow children to use this appliance. The heating
element surface is subject to residual heat after use. Do not touch hot
surfaces use handles and knobs. Ensure that the heating guidelines are
followed to ensure that the food is not heated for too long. For your child’s
safety – Always check food temperature before feeding by testing on a
sensitive part of your skin. Do not operate any appliance with a damaged cord
or plug or after the appliance malfunctions or has been damaged in any manner.
If the supply cord is damaged it must be changed by a qualified person in
order to avoid a hazard. Always use on a dry flat heat resistant kitchen
surface. Do not move appliance when in use. Do not let the cord hang over edge
of kitchen work surface or touch hot surfaces. The product has been fitted
with a cord wind on the base of the unit to allow you to adjust the length of
the cord safely. It is recommended that the cord be kept as short as possible.
Do not use any accessories other than those supplied with this appliance. The
cord must exit the cable tidy using the exit recess. If the cord is correctly
placed in the tidy the product will sit level. Do not start using the product
if it is not sitting level. Regularly check the cord and plug for signs of
damage, if visible remove from use immediately. The water inside the unit gets
very hot and can cause burns, please take care when removing items from the
food and bottle warmer. The unit remains on unless it is switched off at the
mains.
USAGE
The speed at which the food and bottle warmer heats the milk or food will
depend on the size of the bottle or container and the starting temperature of
the milk or food (e.g. room temperature 20˚C or from the refridgerator 5˚C).
We recommend that setting is always used for heating up, setting is used for
keeping warm only. Setting is a MIN setting and should not be used.
MILK OR FOOD SHOULD NOT BE HEATED FOR OVER 30 MINUTES.
The guide gives an indication of the time you can expect the warmer to take.
Maximum average stabilised temperature is approximately 85˚C
FOR FEEDING BOTTLES
- Place filled bottle in the food and bottle warmer.
- Fill the food and bottle warmer with water to the inside edge using a jug or bottle (unless using a 150ml bottle). For a smaller bottle fill to the underside of the screw ring. Never let the water overflow or rise above the neck of the bottle.
- Before plugging in, make sure the food and bottle warmer is switched to the setting. Ensure your hands are dry.
- Plug in the unit to the mains and switch the mains on.
- Turn dial to setting . The amber light will turn on to indicate the food and bottle warmer is switched on and is heating up.
- Once the water is heated, the amber light will switch off to indicate that the thermostat will maintain the temperature of the water. It does not indicate that the milk is ready. Please refer to the timings table in this manual to find out how long the milk should be heated for.
- Heat the milk to the desired temperature. Ensure that the heating guidelines are followed to ensure that the milk is not heated for too long.
- Take care when removing the bottle, as it and the surrounding water will be hot.
- For your child’s safety always check milk temperature before feeding by testing on a sensitive part of your skin. Take care not to overheat the milk. Gently agitate the bottle prior to feeding.
- During feeds the bottle can be placed back in the warmer to keep milk warm by using setting . The thermostat will maintain the temperature of the water. In doing this the indicator light will switch to amber to indicate the warmer is heating up.
- Turn back the dial to setting and unplug the unit after feeding.
- Empty the unit of any water and wipe dry.
FOR BABY JARS
The bottle warmer can also be used to warm jars of baby food. When warming food in a jar, remove the lid from the jar and follow the instructions above, ensuring that the water level in the warmer is always below the rim of the jar.
HEATING GUIDELINES
CLEANING
Unplug and allow to cool before cleaning. After each use pour away remaining
water from the food and bottle warmer base by the tipping the food and bottle
warmer sideways over a sink and wipe clean with a damp cloth only. Do not
clean with abrasive cleaners or allow to come into contact with solvents or
harsh chemicals, damage could result.
DE-SCALING
The frequency of de-scaling should be as follows:
Hard water – 7 days
Medium – 14 days
Soft – 21 days
You can find out your water quality via your water provider. Unplug the food
and bottle warmer and allow to cool before cleaning. After each use pour away
remaining water from the food and bottle warmer base by the tipping the food
and bottle warmer sideways over a sink and wipe clean with a damp cloth only.
A build up of limescale can negatively affect the performance of the food and
bottle warmer. We recommend carrying out the descaling process as per above
frequency guidelines to ensure the food and bottle warmer continues to work
efficiently. Living in a hard water area can produce limescale quicker than
other areas therefore descaling is required sooner. Use a descaler that is
suitable for use with stainless steel and use as per the manufacturer’s
guidelines. Alternatively you can use white vinegar to descale your food and
bottle warmer, please use as per manufacturer’s guidelines. Once you have
descaled then perform a final cleaning cycle. You may need to repeat the
process if you find that limescale is still present. DO NOT use metal objects
or scourers to clean your food and bottle warmer. DO NOT use bleach to clean
the food and bottle warmer. DO NOT use abrasive or anti-bacterial materials.
INFORMATION ON THE DISPOSAL FOR WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
(WEEE)
This symbol on the products and accompanying documents means that used
electrical and electronic products should not be mixed with general household
waste. For proper disposal for treatment, recovery and recycling, please take
these products to designated collection points where they will be accepted on
a free of charge basis. In some countries you may be able to return your
products to your local retailer upon the purchase of a new product.
Disposing of this product correctly will help you save valuable resources and
prevent any possible effects on human health and the environment, which could
otherwise arise from inappropriate waste handling. Please contact your local
authority for further details of your nearest collection point for WEEE.
Penalties may be applicable for the incorrect disposal of this product in
accordance with national legislation.
The product is fitted with a BS 1363 mains plug containing a fuse. If it ever
becomes necessary to replace the fuse, only use fuses that are marked BS 1362,
and rated at 5A. In the unlikely event that this plug is not suitable for the
sockets in your home, it should be removed and a suitable plug fitted as
follows: The wires of the mains lead are coloured in accordance with the
following code:
GREEN AND YELLOW – EARTH
BLUE – NEUTRAL BROWN
– LIVE
As these colours may not correspond with the coloured markings sometimes used
to identify the terminals in the plug, connect as follows.
The wire coloured GREEN AND YELLOW must be connected to the terminal marked E
or by the earth symbol or coloured GREEN or GREEN AND YELLOW. The wire
coloured BLUE must be connected to the terminal marked N or coloured BLACK.
The wire coloured BROWN must be connected to the terminal marked L or coloured
RED.
If you are in any doubt about how to wire a plug or replace a fuse safely,
consult a qualified electrician.
Mayborn (UK) Limited, Balliol Business Park, Newcastle upon Tyne, NE12 8EW,
UK.
EU Representative. Mayborn France Sarl,
56 Rue de paris, Boulogne Billancourt, 92100, France.
All IP rights held by Mayborn (UK) Limited and/or its affiliates.
TOMMEE TIPPEE®. Copyright © 2022. Made in
China.
Model number: 1150.
Voltage: 220-240V~ 50-60Hz 480W. Any questions?
Visit our website: tommeetipppee.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>