LINDY 43098 10m USB 3.0 Active Cable User Manual
- August 25, 2024
- LINDY
Table of Contents
LINDY 43098 10m USB3.0 Active Cable
Specifications
- Supports USB 3.2 / 3.1 Gen 1 / USB 3.0 SuperSpeed data transfer= rates of up to 5Gbps
- Interfaces: USB A male to USB B male
- Cable Length: 10m
- Bus-powered operation
- Compatible with USB-enabled operating systems
Product Usage Instructions
Installation & Operation
- Connect the USB A plug of the 10m USB 3.0 Active Cable to a free USB port on your computer.
- Your computer will recognize the new hardware and install any required drivers automatically.
- Connect the USB B plug of the 10m USB 3.0 Active Cable to your USB device.
It is recommended that this extender is used with low power or self-powered USB peripherals and not high power-consuming devices, unless they have their own power supply.
-
FAQ
-
Q: What is the maximum data transfer rate supported by the 10m USB 3.0 Active Cable?
A: The cable supports data transfer rates of up to 5Gbps. -
Q: Can I connect high power-consuming devices to this cable?
A: It is recommended to use low power or self-powered USB peripherals with this extender, unless high power-consuming devices have their own power supply. -
Q: What kind of devices can be connected using this cable?
A: This cable allows Type B devices such as printers to be connected directly to your computer at longer distances.
10m USB 3.0 A/B Active Cable
User Manual
No. 43098
lindy.com
Introduction
Thank you for purchasing the 10m USB 3.0 Active Cable. This product has been designed to provide trouble free, reliable operation. It benefits from both a Lindy 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.
The Lindy USB 3.0 Active Cable uses built-in active electronics to extend the
cable length of a USB 3.0 device by an additional 10m whilst continuing to
support data transfer rates of up to 5Gbps. With USB A male and USB B male
connectors this product allows Type B devices such as printers to be connected
directly to your comoputer at longer distances and ensures flexible
positioning.
The Lindy USB 3.0 Active Extension Cable is compatible with all USB Type A
equipped computers. With plug and play functionality, this extension cable can
be installed quickly and with minimum fuss.
Package Contents
- 10m USB 3.0 Active Cable
- This manual
Features
- USB 3.2 / 3.1 Gen 1 / USB 3.0 specification, backwards compatible with USB 2.0 / 1.1
- Supports USB 3.2 / 3.1 Gen 1 / USB 3.0 SuperSpeed data transfer rate up to 5Gbps
- Interfaces: USB A male to USB B male
- Ideal for direct device connection
- Cable length: 10m
- Bus powered operation
- Plug & Play Installation
- Compatible with USB enabled operating systems
Installation & Operation
- Connect the USB A plug of the 10m USB 3.0 Active Cable to a free USB port on your computer. Your computer will recognize the new hardware and install any required drivers automatically. Now connect the USB B plug of the 10m USB 3.0 Active Cable to your USB device.
- It is recommended that this extender is used with low power or self powered USB peripherals and not high power consuming devices, unless they have their own power supply.
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection
and recycling of all waste electrical and electronic equipment. It is no
longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process. Each individual EU
member state, as well as the UK, has implemented the WEEE regulations into
national law in slightly different ways. Please follow your national law when
you want to dispose of any electrical or electronic products. More details can
be obtained from your national WEEE recycling agency.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
CE Konformitätserklärung
LINDY erklärt, dass dieses Equipment den europäischen CE-Anforderungen
entspricht
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
You are cautioned that changes or modification not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Hersteller / Manufacturer (EU):
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: info@lindy.com ,
T: +49 (0)621 470050
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
sales@lindy.co.uk ,
T: +44 (0)1642 754000
Tested to comply with FCC standards.
For home and office use.
No. 43098
4th Edition, October 2022
lindy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>