Wi-Tek WI-CGS5018, WI-CGS5026 Cloud Managed Fiber Switch Installation Guide
- August 23, 2024
- Wi-Tek
Table of Contents
Quick Installation Guide
Cloud Switch
WI-CGS5018 | WI-CGS5026
www.wireless-tek.com
Package Contents
Appearance Overview
For W I-CGS5026
- Front panel
- Back panel
- LED indicator light
LED| Color| Description
---|---|---
PWR| Green| Off: switch does not power on
Permanent: the switch is powered on
System| Green| Blinking: the system works
Out: the system is starting or has no power
LNK/ACT| Green| Off: not connected to the network equipment
On: connected to 10/100/1000Mbps devices
Blinking: connected devices are data transmission
For WI-CGS5018
- Front panel
- Back panel
- LED indicator light
LED| Color| Description
---|---|---
PWR| Green| Off: switch does not power on
Permanent: the switch is powered on
System| Green| Blinking: the system works
Out: the system is starting or has no power
LNK/ACT| Green| Off: not connected to the network equipment
On: connected to 10/100/1000Mbps devices
Blinking: connected devices are data transmission
Installation
- Desktop installation
- Rack Installation
Configuration
First, the device is powered on, the Internet is connected to the WAN port of the Gateway, the othe LAN port of the Gateway is connected to the PoE Switch, then the PC is connected to the Switch. Ensure that the PC and the Gateway are in the same subnet.
• Log in to the switch locally
Let the Switch obtain an IP address and then check the DHCP server to see
which IP address was assigned.
The Switch is set to DHCP by default, so it will try to automatically obtain
an IP address. If that fails, then it will use the default fallback I P
address, 192.168.0.1
To log in, follow these steps:
- Launch your web browser. Type the appropriate I P address in the address field.
- The login screen will appear. Enter admin in the Username and Password fields.
Login in
• Cloud login switch configuration
-
Log in to the cloud management interface
(No account, you need to register an account to log in，The URL is：http://cloud2.wireless-tek.com）
-
Enter the cloud binding switch
(explain:The switch must be connected to the Internet to bind successfully )
Please enter the device serial number to bind a device to the
current group, device can be off when binding.
Explanation: The 17-digit SN code of the switch is shown on the sticker on the back of the switch as shown in the figure below
-
After binding, you can use the Switch in the Tunnel option in the cloud management, and then choose to use EWEBor TELNET to enter the switch.
The default account is admin and the password is admin. (After entering the switch, you can configure it based on your own needs)
Warranty Card
Username|
---|---
Address|
Telephone No.|
Purchase Shop|
Purchase Address|
Product Model No.|
Purchase Time|
Serial No.|
Dealer Signature|
- If the product defects within three months after purchase, we will provide you a new product of the same model.
- If the product defects within the three-year warranty period, we will provide the professional maintenance service.
- Proof of purchase and a complete product serial number are required to receive any services guaranteed as part of the limited warranty.
- Any other defects that are not caused by workmanship or product quality, such as natural disaster, water damage, extreme thermal or environmental conditions. sticker damaged, warranty card losing will disqualify the product from limited warranty.
http://support.wireless-tek.com/http://cloud2.wireless-tek.com/
http://www.wireless-tek.com/
Wireless-Tek Technology Limited
Address: Biaofang Technology Building 402, Bao’an street,
Baoan District,Shenzhen City, Guangdong, China
Website: www.wireless-tek.com
Tel:86-0755-32811290
Email: sales@wireless-tek.com
Technical Support: tech@wireless-tek.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>