FORTIN 2023-2024 Evo One Toyota Corolla Cross Vehicle Installation Guide
- August 20, 2024
- FORTIN
Table of Contents
THAR-ONE-TOY16 THARNESS
INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION
VEHICLE
YEARS
TOYOTA
Corolla Cross Hybrid Push-to-Start 2023-2024
2023-2024 Evo One Toyota Corolla Cross Vehicle
Vehicle functions supported in this diagram (functional if equipped)
•| Immobilizer bypass
•| Lock
•| Unlock
•| Arm
•| Disarm
•| Horn
•| Parking Light
•| Tachometer
•| Trunk Open
•| Rear Defrost| Comfort Group AUX.1 Groupe Confort
•| Heated wiper
•| Door Status
•| Trunk Status
•| Hand-Brake Status
•| Foot-Brake Status
•| Hood Status*
•| Secure Takeover
•| OEM Remote monitoring
| COMPATIBLE MODULE REQUIRED| QR CODE ON THE LABEL| FIRMWARE VERSION
88.[33] MINIMUM| To add the firmware version and the options, use the FLASH
LINK UPDATER or FLASH LINK MOBILE tool,sold separately.
---|---|---|---|---
MANUFACTURED AFTER: 2019
UNIT OPTION OPTION UNITE| DESCRIPTION
---|---
| Program bypass option:| C1| OEM Remote status (Lock/Unlock)
monitoring
| IF THE VEHICLE IS NOT EQUIPPED
WITH FUNCTIONAL HOOD PIN:| A11 | Hood trigger (Output Status).
| D6| Push-to-Start
Vehicle hybrid only| D4| Hybrid mode (Vehicle hybrid only)
| Program remote
starter option for
COMFORT GROUP
ACTIVATION:| FUNCTION| MODE| DESCRIPTION
---|---|---|---|---
39| 2| Temperature option : AUX.1 activated at 5oC, 5 seconds after
remote started
NOTES
The vehicles OEM remote and SmartKey are still operable during remote start.
MANDATORY INSTALL
*HOOD NON PIN HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)
MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET
FUNCTION A11 TO OFF
SECURITY STICKER Included
Notice: the installation of safety elements are mandatory. The hood pin
and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION
CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
This guide may change without notice. See
www.fortin.ca for latest version
DESCRIPTION
WIRING CONNECTION
DCRYPTOR PROGRAMMING PROCEDURE
| Parts required (not included)
---|---
| FLASH LINK UPDATER,
| FLASH LINK MANAGER SOFTWARE | PROGRAMME
| Microsoft Windows Computer with Internet connection Ordinateur Microsoft
Windows avec connection Internet
| FLASH LINK MOBILE
| FLASH LINK MOBILE AP
| Smartphone Android or iOS with Internet connection (Internet provider
charges may apply
BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.
KEY BYPASS PROGRAMMING PROCEDURE
1| | Press and hold the programming button:
Connect the 6-PIN Main harness (White connector).
The LEDs will alternate between BLUE, RED,YELLOW & BLUE/RED flashes.
---|---|---
2| | Release the programming button when the LED is BLUE.
If the BLUE LED is not ON solid disconnect the 6-Pin Main connector and go
back to step 1.
3| | Insert the required remaining connectors.
4| | Press the Push-to-Start button twice, to turn the ignition ON.
The BLUE LED will flash rapidly.
5| | Press the Push-to-Start button once to turn the ignition OFF.
The BLUE LED continues to flash rapidly.
6| | Press the Unlock button on the vehicule OEM remote.
The BLUE LED will turn ON solid.
7| | Press the foot-brake pedal.
Press the Push-to-Start button until the engine start.
Release the foot-brake pedal.
The BLUE LED will turn OFF.
The RED LED will turn ON.
8| | Press the Push-to-Start button once to turn off the engine.
9| | The RED LED will turn OFF.
The YELLOW LED will turn ON
Wait,
The RED and YELLOW LEDs will alternate.
Press the foot-brake pedal.
Press the Push-to-Start button until the engine start.
Release the foot-brake pedal.
10| | Press the Push-to-Start button once to turn off the engine.
11| | Disconnect all connectors and after the 6-Pin (Main-Harness) or the
4-Pin Data-link connector.
12| | Use the tool:
FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
*Parts required (not included)
13| | AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 6-Pin (MainHarness) or the 4-pins
(Data-Link) connector and after all the remaining connector.
The module is now programmed. REMOTE STARTER / ALARM VERIFICATION PROCEDURE
Test the remote starter. Remote start the vehicle.
REMOTE STARTER PROGRAMMING PROCEDURE
REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.
REMOTE STARTER FUNCTIONALITY
| | | |
---|---|---|---|---
All doors must be closed.
Remote start the vehicle.
| Unlock the doors with either:
• The OEM remote
• The remote-starter remote
• Or the proximity remote| Enter the vehicle with the
SMART-KEY.| DO NOT PRESS THE BRAKE PEDAL.
Press and release the Push-to-Start button once.| Press the brake pedal.
The vehicle can now be put in to gear and driven.
If the Smart-Key is not detected the vehicle will shut down.
Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest firmware
and download the latest installation guide(s) prior to the installation of
this product. WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit
before connecting to it. Only a computer safe logic probe or digital
multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no
liability or responsibility whatsoever pertaining to the accuracy or currency
of the information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
Copyright © 2006-2019, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE