PHILIPS LUMUD5104LX1-10 Ultinon Drive 5100 15.2 cm 6 LED Light Bar User Manual
- June 13, 2024
- Philips
Table of Contents
Ultinon Drive
LED Lightbar
UDSI0IL 4inch X1, UDSI04L 6 inch X1
UDS102L 10 inch X1, UDS103L 20 inch X1
UD7050L 20 inch PRO X1
User manual
LUMUD5104LX1-10 Ultinon Drive 5100 15.2 cm 6 LED Light Bar User
The Philips LED Lightbar bears the official Philips
Automo tive Grade Quality seal Philips Automotive Grade Quality products are
designed and developed following strict quality-control processes (including
applicable ISO norms), leading to consistently high roduction standards.
Important
Please read this user guide carefully before using your LED Lightbar. This
guide contains important health and safety information.
If you need further assistance, please visit our website:
www.philips.com/support
Or visit your local Philips Dealer
For more information visit https://www.philips.com/LED-driving-lights
**** WARNINGS
- Philips Ultinon Drive series are type-approved according to UN ECE R149 regulation and may therefore be installed and operated on public roads. Please note: It is your own responsibility to ensure that the installation and use of the LED lightbars complies with applicable local and country-specific legal requirements. This includes, but is not limited to: Only install in pairs. The total of all reference numbers of the high beam headlights mounted on the vehicle may not exceed 100. Boost function is not permitted for use on public roads and can only be used off road.
- Do not look directly into the light source during operating due to the extremely light output.
- Do not mount the lights in any location that obstructs the view of the driver; install it on location/devices which are designed for such purpose.
- Professional installation is recommended.
- Ensure that installation will not interfere with existing vehicle systems, airbag system sensors, forward and signal lighting, etc.
- Ensure adequate clearance exists between the light and its wiring, between any moving or rotating parts of the vehicle (e.g., tires/wheels, suspension, doors, etc.).
- Ensure the light is mounted at a safe distance from temperature-sensi-tive objects. Do not route wires along or near hot, sharp, or moving surfaces that might damage the wiring.
- When laying out wire routing, stay clear of radio antenna and wiring to minimize radio interference.
- Only operate under the specified voltages as mentioned in the specifications.
- Use appropriately sized switches, wires, and circuit fusing.
- Do not open the product and do not make any modifications to the lamp or cables; for any defective/malfunctioning devices, please contact our aftersales service.
- The light becomes very hot during operation and remains hot after use. Do not touch the light when hot.
- Do not clean with flammable substance or cover by flammable materials.
Discarded electrical products must not be disposed together with
household waste. Please use recycling facilties. Contact your local authority
or retailer for advice on recycling, 
| Type | A-mm | B-mm | C-mm | D-mm | E-mm | F-mm |
|---|---|---|---|---|---|---|
| UD51O1LX1 | 64±2 | 60±2 | Φ 6.5±0.2mm | 50.5±2 | 150±2 | 37.6±2 |
| UD51O4LX1 | 64±2 | 215±2 | Φ 6.5±0.2mm | 50.5±2 | 184±2 | 40.75±2 |
| UD51O2LX1 | 64±2 | 334±3 | Φ 6.5±0.2mm | 50.5±2 | 303±3 | 40.75±2 |
| UD51O3LX1 | 64±2 | 589±4 | Φ 6.5±0.2mm | 50.5±2 | 558±4 | 40.75±2 |
| UD7050LX1 | 64±2 | 604±4 | Φ 6.5±0.2mm | 50.5±2 | 573±4 | 40.75±2 |
Ifan addiional pirof poston ights i not
parmited, the positon ight should bo csconnectad. The legal reguiatons in
indivcual counties mustbe bserved. 
Ifroad-legal high beam (red) and Boost
mode (yellow) are turned on together, the light bar willbe in boost mode.
Item| lSymbo Symbol [unit]| U1)5101LX1| UD5104LX1|
U135102LX1| UD5103LX1| UD7050LX1
---|---|---|---|---|---|---
Application| /| Road legal| Road legal| Road legal|
Road legal| Road legal| Off-road boost
Operating Voltage| U (V]| 9-30V DC| 9-30V DC| 9-30V DC| 9-30V DC| 9-30V DC|
9-30V DC
Wattage (driving beam)@132V| P (IN)| 20| 28| 37| 59| 60| 82
W (Whiteposition light)@132V| P (1N]| 18| 1.| 1.| 16| /
W (Heated tens feature)P32V| P (W]| /| /| /| /| 13.
Effective lumen output| 0 [Im]| 1150| 2000| 2300| 4000| 4000| 5300
Color temperature| T [K]| 6500| 6500| 6500| 6500| 6500
Beam pattern| /| Combo| Combo| Combo| Combo| Combo
Beam length(1 lux)| m| 240| 298| 370| 500| 480| 520
ECE Ref. No| /| 13.| 20| 30| 30+30| 30+30| Off-road usageonly
Operating temperature| (t]| -40°C–480t| -400C–.80°C| -40°C-4800C| -40C-.80°C| -40t-.80°C
Storage temperature| (°t)| -40Y-+80°C| -40°C-+80°C| -40°C-+80°C| -40t-+80t|
-40t-+80°C
Weight| Id| 560| 666| 990| 1710| 1780
Ingress protection| /| IP68 8 IP69K| IP68 & IP69K| IP68 8 IP69K| IP68 & IP69K|
IP68 8 IP69K
Shock resistance| /| IK07| II<07| 11(07| II<07| IK07
Cable length| /| 0.5m with DT connector| 0.5m with DT connector| 0.5m with DT
connector| 0.5m with DT connector| 0.5m with DT connector
Heated lens| /| /| /| /| /| When powering up. function will automatically !um
on when temperature inside the lamp s 5C. and automatically turn off when
temperature inside the lamp a 30’C.
WARRANTY
www.philips.com/support
Name:……………………….
Address:………………………
Phone number:……………………
Product name:………………………
Purchasing date:……………………..
Lumileds is the warrantor of this product.
2022@ Lumileds Holding B.V. All rights reserved.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke
Philips N.V. and are used under license.