EUROLAMP 144-88002 Mirror Rectangular Touch LED 3CCT User Guide

: August 17, 2024
: EUROLAMP

Table of Contents

EUROLAMP 144-88002 Mirror Rectangular Touch LED 3CCT
Safety Recommendations
Installation
Operating Instructions
More Safety Instructions
CONTACT INFORMATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EUROLAMP 144-88002 Mirror Rectangular Touch LED 3CCT

Thank you for choosing the product of Eurolamp ABEE.

Safety Recommendations

If It is this is essential for you to first read time and use the understand product, all the keep safety the and instructions operating secure instructions for future before reference. the installation of the product.

It is essential to read and understand all the safety and operating instructions before the installation of the product.
If this is your first time using the product, keep the instructions secure for future reference.
For the installation of the mirror, consult a qualified electrician to confirm that the installation of the luminaire will be carried out by the required provisions. Improper installation and use may result in electric shock or fire.
The ca do no at empty or wing he lum ule at the end of the self if they must be fly replaced In
The warranty is no longer valid when there are defects in the product that come from damages or when the parts of the product have been damaged by unauthorized persons as well as after any intervention on the device due to improper handling or misuse.
Follow the instructions below for safe use and installation of the mirror. As you unpack the product, check for damages. In that case, please inform your supplier.

Installation

Follow the instructions and the drawings below for safe installation. (It is recommended that the installation has to be carried out by an electrician)
- Before you start, check and be sure that you have turned off the power supply at the point at which you will place the product.
Measure the distance between the 2 holes on the back of the mirror and mark the distance so that you can place the mirror on the surface you want.
After you place the mounting screws, you can carefully hang the mirror.
Make sure that the mirror is stable and then connect the plug to the outlet.
- In case, that the luminaire is insulation class “I” and the ground wire is used. You should make the connections accordingly, so the luminaire is grounded. (Insulation Class I, ® )
- In case the luminaire is insulation class “Il” and the ground wire is not used, continue with the rest steps. (Insulation Class I, 0 ).
- In case, that the luminaire is insulation class “I” and the ground wire is used. You should make the connections accordingly, so the luminaire is grounded. (Insulation Class I,
- In case the luminaire is insulation class “Il” and the ground wire is not used, continue with the rest steps. (Insulation Class II, )

Operating Instructions

Touch the ON/OFF switch to turn on and turn off the mirror light.
When the button is “blue” the light should be on and when it is “white” the light should be off.
The mirror has a CCT adjustment function to select the lighting color.

More Safety Instructions

Use the mirror only for its intended use, as described in these instructions.
Do not use the mirror if it has a damaged cord if it is not working properly, or if it has been dropped or damaged or dropped into water.
Keep the cord away from heated surfaces.
Do not use the mirror outdoors.
Mount the mirror at the correct height.
Always unplug this mirror light from the electrical outlet, before cleaning and servicing.
If not been used for a long time, disconnect the mirror from the mains.

EUROLAMP SA reserves the right to interpret and amend the content of this document at any time without prior notice. The marking indicates that the product should not be disposed of with household waste throughout the European Union. Recycle components and parts of the product, return the used device, use a collection system, or contact the reseller you have purchased the product.