EUROLAMP Smart WiFi Wireless External Alarm Siren Instructions
- June 9, 2024
- EUROLAMP
Table of Contents
EUROLAMP Smart WiFi Wireless External Alarm Siren
Introduction
The Alarm Siren has a 120 dB sound and flash. It has to work with a home alarm system. In case of intrusion, the alarm system will send a RF signal to the Siren, and then the siren will sound with a piercing noise to deter the intruder. It adapts micro-technology in controlling circuits, which ensures high accuracy and reliability. It can widely be used at home, in a shop, a warehouse, an office, etc.
Technical Specifications
- Wireless Frequency: 315 MHz
- Sound Volume: 120dB
- Input Voltage: AC 100-240V 50/60Hz
LED Alarm Status
- System Armed: LED 2 & 3 ON
- System Disarmed: All LED Lights OFF
- Home Alarm: LED Light 2 & FLASH
Pairing with Home Alarm System
-
Plug the power adaptor in the power socket (220-240V).
-
Turn back the siren and shortly press “Set Switch”, and then you will see 4 lights on.
-
Open the EUROLAMP Smart app and enter into your smart alarm menu. Press the “Home” or “Away” buttons in the app and you will hear a short beep from the alarm device followed by a strong beep from the external siren, then the pairing is successful.
-
Shortly press the “Set” button in the external siren and the 2nd LED will light.
-
Repeat Step 4, 3 more times and the siren will sound a long beep, all LED lights will be turned off and the pairing is complete and saved.”
Note: At step 5, if the siren beeps 4 times, the pairing has failed. The reasons for the failure are the following: -
Repeated pairing. The siren has already been paired with the home alarm system.
-
Over-pairing. A home alarm system can pair mostly 10 wireless sirens.
Clear the pairing records
Power on and press shortly “Set” switch, and you will see all the LED Lights on. Long press “Set” until you hear a beep from the siren. Then, all the pairing records are removed.
[email protected] /www.eurolampglobal.com