EUROLAMP LX-2803L Quartz Heater User Manual

: June 2, 2024
: EUROLAMP

Table of Contents

EUROLAMP LX-2803L Quartz Heater
TECHNICAL FEATURES
Brief instruction
Maintenance
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

EUROLAMP LX-2803L Quartz Heater

EUROLAMP-LX-2803L-Quartz-Heater-PRODUCT

TECHNICAL FEATURES

Volt: AC 220-240V ~ SOHz
- Watt: 2800W
Please read these instructions carefully before connecting your device to the mains. Please pay particular attention to the safety information.
We recommend that you keep the instructions for future reference.

Brief instruction

The item applies infrared heating techniques, which can be easily absorbed by human bodies. Even though it is used in a poor airproof or spacious room, it can provide an ideal warming effect.

The heater bears a novel design, elegant outlook, and the following features as well:

Adopting a quartz tube, and heated thread, this can heat up quickly along with the heat change efficiently.
New design, which can provide a high quantity of heat reflecting.
Fall over switch, which can cut off the electrical resource to protect safety when it falls.

Operation

Put the plug into the socket. Turn on the thermostats Press the appropriate button and select one of the following operating options:
700W (TOP SIDE 1ROD)
1400W (FRONT SIDE 2 RODS)
2100W(FRONT SIDE 3 RODS)
2800W (FRONT & TOP SIDE 4 RODS)
When not in use, turn off the power switch, pull out the plug, and put away the cord into the collecting box.

Caution for operation

Read all instructions before using this heater.
The heater works under 220VAC, make sure to insert the plug into the suitable electrical outlet but don’t keep it on when not in use.
This heater is hot when in use. To avoid burns, do not let the bare skin touch hot surfaces.
This heater must be used in an appropriate place to keep the heater running naturally and being used safely.
If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3m from the front of the heater and keep them away from the sides and rear.
Do not use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the device.
Do not use the heater directly below a socket outlet.
Do not use this heater with a programmer, timer, or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
Do not use this heater in the immediate surroundings of a bath, a shower, or a swimming pool.
If it is necessary to take precautions during the installation of the appliance, appropriate details shall be given.
Do not use the heater because of the possible danger of installations close to curtains and other combustible materials.
Always unplug the heater when not used.
Do not operate any heater with a damaged cord or plug or after the heater malfunctions have been dropped or damaged in any manner. Return the heater to an authorized service facility for examination electrical or mechanical adjustment or repair.
Do not use outdoors.
This heater is not intended for use in bathrooms, laundry, areas, and similar indoor locations. Never locate the heater where it may fall into a bathtub or other water container.
Do not run a cord under the carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Arrange the cord away from the traffic area so that it will not be tripped over.
To disconnect the heater, turn the controls to”off”, then remove the plug from the outlet.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire or damage the heater.
To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like beds, where openings may become blocked.
A heater does not and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire.
Do not use the heater if the heating element is damaged. Please send it to the manufacturer or its service agent or similarly qualified person to repair.
- Damaged supply cords are to be replaced by the manufacturer, service agent, or similarly qualified person to avoid hazards.

Maintenance

The regular cleaning of the reflector

Before cleaning, the plug must be removed from the socket outlet.
Take down the steel grill.
First use a damp cloth to wipe off dirt from the surface of the reflector, and then clean again with a wet cloth, and finally clean it again with a damp cloth.
After cleaning, fit the steel grill on. The unit surface can be cleaned with a wet cloth, furthermore, it can be cleaned with suds or some detergents.

But do not use gas or chemical agents. furthermore, it can be cleaned with suds or some detergents. But do not use gas or chemical agents.

CORRECT DISPOSAL OF THIS PRODUCT

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

MADE IN CHINA