ICY DOCK MB326SP-B SATA HDD And SSD Cage User Manual
- June 16, 2024
- ICY DOCk
Table of Contents
ICY DOCK MB326SP-B SATA HDD And SSD Cage
Specifications
| Feature | Description |
|---|---|
| Compatibility | 6 x 2.5″ SATA HDD & SSD |
| Bay Size | 1 x 5.25″ |
Note: Please use the included screws to secure the drive(s).
Product Overview
Front View
- Drive Tray Ejection Button
- LED Indicator (Device Power: Solid Blue LED / HDD Access: Blinking Blue LED)
Rear View
- SATA HDD/SSD Connections
- 3 Pin Fan Wafer
- Fan Speed Switch (High/Low/Auto)
Note: To function properly, please connect both 15-pin power connectors to the enclosure when using the device.
Fan Speed Settings
| Switch Setting | Fan Speed |
|---|---|
| High | 100% |
| Low | 60% |
| Auto (Default) | The fan will start at a Low setting and increase its speed |
depending on the HDD temperature. If the HDD exceeds over 40°C (Room temp 25°C), the fan will increase its speed to maximum.
Note: The fan speed control has three settings: High, Low, and Auto settings. The High setting sets the fan at its maximum output and in the Low setting, the fan is at 60% of its maximum output. In Auto mode, the fan speed will adjust according to the temperature of the device.
Installation Guide
2.5″ HDD/SSD Installation
- Push the button to eject the drive tray.
- Press down the front side of the drive to align with the tray.
- Optional: Two M3*4 screws can be installed on the bottom backside of the tray for extra drive stability.
Note: Firmly press down the backside of the drive to secure the drive onto the tray. The ExpressTray supports tool-less drive installation. The patented mechanical design inside the enclosure secures the drive once the ExpressTray has been inserted into the enclosure. Please do not flip the ExpressTray when there is a hard drive or solid-state drive placed on it.
FAQ
Q: What should I do if the LED indicator is not functioning? A: If the LED does not function, but the drive can still be read and written to, it is considered a category for troubleshooting. If the LED does not function and the drive cannot be read or written to, please contact us for help. Q: Can I hot-swap drives with this device? A: To utilize the hot swap function, the host must also support hot swap. Please refer to the motherboard or controller card specifications and user manual. Q: Where can I find more information or support for ICY DOCK products? A: For further questions or concerns about ICY DOCK products, please visit the official website at http://www.icydock.com.
Important Notes
- ICY DOCK reserves the right to change unrelated technical specifications and is subject to change without prior notice.
- ICY DOCK will not be liable for any software, hardware, or data stored within or interfacing with ICY DOCK products that result in damage or malfunction. ICY DOCK will only be responsible for repairs and services of ICY DOCK products.
- Due to different drive specifications for the drive access signal, some drives may not support the access LED.
- To utilize the hot swap function, the host must also support hot swap. For more details, refer to the relevant documentation.
Package Contents
Note: Please use the included screws to secure the drive(s).
Device Information
Front View
- Drive Tray Ejection Button
- LED Indicator (Device Power: Solid Blue LED / HDD Access: Blinking Blue LED)
Rear View
Note: In order to function properly, please connect both 15-pin power connectors to the enclosure when using the device.
Note: The fan speed control has three settings: High, Low and Auto settings. The High setting sets the fan at its maximum output and in the Low setting, the fan is at 60% of its maximum output. In Auto mode, the fan speed will adjust according to the temperature of the device.
2.5″ HDD/SSD Installation
Note: Firmly press down the backside of the drive to secure the drive onto the tray.
The ExpressTray supports tool-less drive installation. The patented mechanical design inside the enclosure secures the drive once the ExpressTray been inserted into the enclosure. Please do not flip the Express Tray when there is a hard drive or solid-state drive placed on it.
Optional – Two M3*4 screw can be installed on the bottom backside of the tray for extra drive stability.
NOTE
- ICY DOCK reserves the right to change unrelated technical specifications and is subject to change without prior notice.
- ICY DOCK will not be liable for any software, hardware, or data stored within or interfacing with ICY DOCK products that result in damage or malfunction. ICY DOCK will only be responsible for repairs and services of ICY DOCK products.
- Due to different drive specifications for the drive access signal, some drives may not support the access LED. If the LED does not function, but the user can read and write to the drive, it falls under this category. If the LED does not function, and the drive cannot be read or written to, please contact us for troubleshooting.
- To utilize the hot swap function, the host must also support hot swap. To check if your host supports hot swap, please refer to the motherboard or controller card specifications and user manual.
- For further questions or concerns about ICY DOCK products, please visit us at http://www.icydock.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>