EUROLAMP 147-29172 Outdoor Quartz Heater User Manual
- June 15, 2024
- EUROLAMP
Table of Contents
EUROLAMP 147-29172 Outdoor Quartz Heater
INSTRUCTION
WARNINGS
- This electrical appliance complies with technical safety and electromagnetic compatibility standards. Never touch your heater when in operation (risk of burns).
- Never touch it with wet hands. Never rotate the heating part of the appliance during operation. To change the tit angle of the heating part, we advise you to wait for 15 minutes after the appliance has been switched off. Never place anything on your heater’s safety guard as this may cause overheating (e.g. towels). Never use your appliance to dry washing.
- Although the heating element has stopped glowing, it may still be alive and potentially dangerous. Check that the selection indicator is in position off before taking any action.
Switch off your appliance: After use/ In the event of malfunction/ Before
cleaning it.
Never operate your appliance if it has fallen over. Never dismantle your
appliance. An incorrectly repaired appliance may be dangerous to the user. If
you encounter any problems, please take it to one of the Approved Service
Centers in our customer service network
The warranty will be void in the event of damage arising from improper use. Do
not use this heater in the immediate surroundings of a bath, a shower, or a
swimming pool. This movable appliance is designed for use in gardens and can
be used indoors and outdoor. The warranty will not apply to appliances used
for professional usage. Although the heater may be used outdoors, the main
plug must only be connected to the supply indoors. This movable appliance is
designed for use in gardens and can be used indoors and outdoors. The warranty
will not apply to appliances used for professional usage. Although the heater
may be used outdoors, the main plug must only be connected to the supply
indoors. Children or persons who lack the knowledge or experience to use the
device or whose physical, sensory or intellectual capacities are limited must
never be allowed to use the device without supervision or instruction by a
person responsible for their safety. Children are never allowed to play with
the device. This appliance is not intended for use by persons(including
children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for
the safety. Children should be supervised to ensure that they do not play with
the appliance.
VOLTAGE Before using the appliance at the first time, ensure that your
mains voltage corresponds to the voltage indicated on the appliance. It is a
class I appliance and must be
earthed.
SAFETY
CAUTION: Before fitting or removing the appliance, ensure that the heater’s power line supplying the heater is disconnected. Check that the power line is connected to a 30mA differential circuit breaker. This appliance is designed for use in gardens. When it is switch on, an electrical heating appliance reaches a very high temperature capable of causing burns. Make sure that all other users are aware of the risks. If you have any doubts concerning installation possibilities for this heater, please consult a qualified electrician. Children, the elderly, and the infirm may not always be aware of the danger involved in using electrical appliances. Never allow this appliance to be used without supervision. The appliance must be positioned so that the plug is accessible. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent, or a similarly qualified person to avoid a hazard. The heater must not be located immediately below a socket outlet. Do not use this heater with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly. Do not place the appliance close to curtains and other combustible materials.
HOW TO ASSEMBLE
Before installing your appliance, you must disconnect the electrical supply at the circuit breaker. Use the four screws to fix the bracket of the heater on the wall in the right position and then fix the heater on the bracket.
OPERATION
The appliance is switched on by employing the pull switch. The slight vibration was noticeable when the appliance was switched on will stopped after a few seconds.
MAINTENANCE
Your appliance does not require any particular maintenance. However, in
the event of a malfunction, please consult an Approved Service Center.
HOW TO HANG THE HEATER ON THE WALL
Remarks:
- Three positions for’1′ are for fixing the item to the bracket.
- The four positions for’2′ are for fixing the bracket to the wall.
- At the ideal position and height for the heater, firstly you fix the four set screws on the wall with the distance on the above and fix four M4X35 screws in the set screws securely, then you can hang the heater.
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>