SKYDANCE ER-A PIR Motion Sensing Head Sensor Instruction Manual
- August 14, 2024
- SKYDANCE
Table of Contents
- SKYDANCE ER-A PIR Motion Sensing Head Sensor
- Product Specifications
- Product Usage Instructions
- Frequently Asked Questions
- PIR Motion Sensing Head
- Wiring Diagram
- Sensing head installation
- Sensing head application
- Installation precaution
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SKYDANCE ER-A PIR Motion Sensing Head Sensor
Product Specifications
- Product Name: ER-A PIR Motion Sensing Head Sensor
- Power Supply: AC100-240V or 12-24VDC Constant Voltage
- Output Current: 8A
- Wire Length: 1 meter
- Mounting Options: Wall mounting (1.2~1.5m diameter) or Ceiling mounting (1~1.5m height, 1.2~1.5m diameter)
Product Usage Instructions
Sensing Head Installation:
- Wall Mounting: Ensure a diameter of 1.2~1.5m for optimal performance.
- Ceiling Mounting: Maintain a height of 1~1.5m with a diameter of 1.2~1.5m.
Sensing Head Application:
- Not in Sensing Range: No detection triggered.
- Entering Sensing Range: Lights turn on.
- Out of Sensing Range: Lights turn off after 30 seconds.
Installation Precaution:
- Recommended for wall mounting.
- Avoid direct sunlight to prevent interference signals.
- Install in a dry environment away from windows, air conditioners, and fans.
- Avoid heat sources like kitchen appliances generating steam, walls in direct sunlight, etc.
- Ensure installation height is within specified limits and no obstructions within the detection range.
Frequently Asked Questions
- Q: What should I do if the lights do not turn off after exiting the sensing range?
- A: Check for any obstructions or heat sources near the sensing head that might be causing false detections. Ensure proper installation following the guidelines provided in the user manual.
- Q: Can I use this product outdoors?
- A: It is recommended to use the sensing head indoors to avoid environmental factors like direct sunlight and weather conditions affecting its performance.
PIR Motion Sensing Head
- Concealed PIR motion sensing head.
- Sensor head detection distance: 3-4 meters, detection angle: 120°.
- Powered by low voltage 5VDC, output 5V level signal.
- Bilateral snap design for easy installation.
- Used for lighting stairs, garages, cabinets, closets, wine cabinets and more.
Wiring Diagram
- Power supply using constant voltage power supply + junction box
Power supply using cabinet constant voltage power supply + junction box
Sensing head installation
Sensing head application
- When people enter the sensing range, the light turn on;
- when people exit the sensing range, the light turn off after 30 seconds.
Installation precaution
- Recommended for wall mounting.
- If the sensing head is exposed to direct sunlight, an interference signal will be introduced.
- The sensing head should be installed in a dry environment and keep away from windows, air conditioners and fans.
- Make sure that the sensing head stays away from heat source, such as countertops, kitchen appliances that generate hot steam, walls and windows in direct sunlight, air conditioner, heating, refrigerators, stoves and so on.
- We recommended the wall-mounted installation height is1-1.5 meters and the ceiling mounting height is no more than 3 meters.
- There should not be shelter(screen, furniture, large bonsai) within the range of detection.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>