GE Lighting CPLGSTDBLW1S Indoor Smart Plug User Guide
- August 17, 2024
- GE Lighting
Table of Contents
GE Lighting CPLGSTDBLW1S Indoor Smart Plug User Guide
Welcome to Cync!
You’ve chosen a great product to enhance your smart home living and entertainment.
There are 3 ways to get started, which are outlined in this guide. Use the native Cync App to connect all of your Cync products and get the full range of features. Connect via Matter to streamline your smart products. Lastly, with a professionally installed Savant System, a pro can commission this Cync product in your Savant home.
Learn more about all 3, and choose which set up is right for you.
3 Ways to Get Started
Please note: You may see a “set up using Matter” notification on your phone. To set up in the Cync App, powered by Savant, dismiss the notification.
Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple’s performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Google, Android, and Google Home are trademarks of Google LLC.
Get Started With Cync
Enable all Cync features
For set up help, visit support.gelighting.com or call 1-844-302-2943
Get Started With Matter
Connect with other smart products
NOTE : If you already have Cync devices in the Cync App, add your new device to the Cync App, then enable your voice assistant.
Get Started With Savant
Professionally installed smart home
Contact a professional installer to get started.
A professionally installed smart home system unifies your connected environment into one integrated experience controlled by intuitive, award- winning software.
- Climate
- Lighting
- Entertainment
- Security
- Energy
Scan to learn more about Savant smart home and schedule a consultation. Professional installers: scan to access setup documentation.
To learn more about Savant, visit www.savant.com
FCC Compliance Statement Compliance Notice:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications that are not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
RF Exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, human proximity to the antenna shall not
be less than 8 inches during normal operation.
RF Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
This transmitter must be installed to provide a separation distance of at
least 8 inches from all persons and must not be collocated or operating in
conjunction with any other antenna or transmitter.
CAUTION – High Voltage – Disconnect power supply before servicing
Operation temperature: 0-40°C
For Control of Electronic Ballast, CFL, LED Lamps
Type l Enclosure
IP20
Pollution Degree 2
Impulse Voltage: 1500V
Type l.B action
Indoor use only.
IC Statement
This device complies with RSS247 of Industry Canada.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of
the device. Appareils radio exempts de licence.
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
This transmitter must be installed to provide a separation distance of at
least 20cm from all persons and must not be collocated or operating in
conjunction with any other antenna or transmitter.
GE is a trademark of General Electric Company, used under trademark license.