EAE R3.2 Mona Card Holder Instruction Manual
- August 14, 2024
- EAE
Table of Contents
MONA Card Holder R3.2 Installation Manual Mona Card Holder
EAE KNX MONA Series
Device Description
EAE Card Holder is intended to be used for energy saving purposes in hotel guest rooms.
- Monoblock glass design
- Compatible with Mifare 13.56 MHz card
- Contactless reading for RFID Card information.
- Prevents mechanical wear and card deformation.
- 60×60 mm easy mounting to standard junction boxes.
- Different glass color options
- onfigurable RGB illuminated buttons
- Up to 6 independent programmable buttons
- Switching
- Dimming
- Shutter/Blind
- Value
- Scene control
- Status notification
Operation and Display
- Programming Button
- KNX Port Terminal
- Programming LED
- Card Slot
- Buttons
Technical Data
| Protection Type | IP20 | EN 60 529 |
|---|---|---|
| Safety Class | II | EN 61 140 |
| Connections | KNX | Bus Connection |
| Power Supply | Voltage | |
| Current drawn from bus | 21V… 30V DC, KNX |
< 25 mA
Operating Elements| LED (red)
LED (RGB)| Addr Prog. LED
Status LEDs
Operating Temperature| Ambient| -5° C + 45° C
Humidity| Max. Air humidity Front side| 95% no moisture
Dimensions| Side – Surface mounted part
Side – Flush mounted part| 90 x 100 mm
12 mm
18.8 mm
Box Material| Surface : Glass
Flush Mounted Part : Polycarbonate|
Color| Surface : Black or White
Flush Mounted Part : Black|
CE| In accordance with the EMC guideline and low voltage directives.|
Installation
Installation of the product is done with metal flange. It is fixed to the
junction box by using screws. The switch has magnets and should be positioned
the card slot upwards. The device will stick on flange by magnetization.
Multiple devices can be combined up to 3.
NOTE: Distance between center of flanges is 71 mm.
Commissioning
Device default physical address is 15.15.255. Determination of the physical
address and setting of parameters are actualized with Engineering Tool
Software (ETS5 or higher). “.knxprod” file must be imported to the ETS.
(http://www.eaetechnology.com/)
A detailed information about parameter configuration can be found in Product
Manual of device.
Installation and commissioning of device may only be implemented by trained
electricians. The relevant standards, directives, regulations and instructions
must be observed when planning and implementing the electrical installation.
-Protect the device against moisture, dirt and damage during transport, storage and operation!
-Do not operate the device out of the specified technical data which is stated.
-The device may only be operated in closed enclosures (Distribution boards)
Cleaning
If device becomes dirty, only a dry cloth can be used for cleaning. İt is not suitable to use wet cloths, caustics and solvents.
© EAE Technology
www.eaetechnology.com
Documents / Resources
| EAE
R3.2 Mona Card
Holder
[pdf] Instruction Manual
R3.2 Mona Card Holder, R3.2, Mona Card Holder, Card Holder
---|---
References
- EAE Technology – KNX Akıllı Ev Sistemi, Aydınlatma Otomasyonu
- EAE Technology – KNX Akıllı Ev Sistemi, Aydınlatma Otomasyonu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>