EAE Technology EAE-KNX MONA Series Thermostat Instruction Manual
- June 13, 2024
- EAE Technology
Table of Contents
Installation Manual MONA Series
EAE KNX MONA Thermostat
MONA Thermostat R0
Device Description
MONA premium thermostat series create a natural harmony and adds value to your interior designs with elegant look and sophisticated technology. It is used to control the HVAC systems including control the switches, dim the lights, activating scenes, control blinds and vice versa.
- Monoblock glass design
- 60×60 mm easy mounting to standard junction boxes.
- Different glass color options
- Configurable RGB illuminated buttons
- Up to 6 independent programmable buttons
• Switching
• Dimming
• Shutter/Blind| • Value
• Scene control
• Status notification
---|---
Operation and Display
- KNX Port Terminal
- Programming LED
- Programming Button
- Control Buttons
- Fan Speed (1, 2, 3, Auto)
- Operation Mode Button (Comfort, Night, Away, Protection)
- Setpoint Temperature UP
- Setpoint Temperature DOWN
- Built-in Screen
Technical Data
| Protection Type | IP20 | EN 60 529 |
|---|---|---|
| Safety Class | II | EN 61 140 |
| Connections | KNX | Bus Connection |
| Power Supply | Voltage | |
| Current drawn from bus | 21V… 30V DC, KNX |
<21mA
| |
Operating Elements| LED (red) LED (white)| Addr Prog.LED
Button Status LEDs
Operating Temperature| Ambient Storage| -5° C + 45° C
-25° C + 55° C
Temp. Sensor| Measurement Accuracy| ±0,3 °C
Humidity| Max. Air humidity| 95% no moisture
Dimensions| Front side
Side — Surface mounted part
Side — Flush mounted part| 90 x 100 mm 12 mm
18.8 mm
Weight| 65 g
Box Material| Glass — Surface
Polycarbonate — Flush mounted part
Color| Front Side — Glass — Black or White
Flush mounted part — Polycarbonate – Black
CE| In accordance with the EMC guideline and low voltage directives
Installation
Installation of the product is done with metal flange. It is fixed to the
junction box by using screws. The switch has magnets and should be positioned
the screen upwards. The device will stick on flange via magnetization. Multiple
devices can be combined up to 3.
NOTE: Distance between center of flanges is 71 mm. 
Commissioning
Device default physical address is 15.15.255. Determination of the physical
address and setting of parameters are actualized with Engineering Tool
Software (ETS4 or higher). “.knxprod” file must be imported to the ETS.
(http://www.eaetechnology.com/)
A detailed information about parameter configuration can be found in Product
Manual of device.
Installation and commissioning of device may only be implemented by trained
electricians. The relevant standards, directives, regulations and instructions
must be observed when planning and implementing the electrical installation.
-Protect the device against moisture, dirt and damage during transport, storage and operation!
-Do not operate the device out of the specified technical data which is stated.
-The device may only be operated in closed enclosures (Distribution boards)
Cleaning
If device becomes dirty, only a dry cloth can be used for cleaning. it is not suitable to use wet cloths, caustics and solvents.
© EAE Technology
www.eaetechnology.com
References
- EAE Technology – KNX Akıllı Ev Sistemi, Aydınlatma Otomasyonu
- EAE Technology – KNX Akıllı Ev Sistemi, Aydınlatma Otomasyonu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>