MUNBYN IRX15 Rugged Laptop User Manual
- August 8, 2024
- MUNBYN
Table of Contents
MUNBYN IRX15 Rugged Laptop
Specifications
- Product Name: Rugged Laptop IRX15
- Version: 1.0.0
Product Introduction:
Unpack:
When unpacking the product, ensure all items are present including the
laptop, charge cable, power adapter, and bracket.
Using Battery:
- It is advised not to leave the battery unused for long periods whether in the device or in storage.
- The Li-ion battery has a lifespan of around 2 to 3 years with reduced capacity after approximately 300 charge cycles.
- Regularly check the battery charging status and refer to the manual for related information.
- When the battery is not in use, it will slowly discharge.
- Monitor the battery status frequently.
Tips:
While charging, the device and charger may become hot which is normal and
should not affect performance.
Notes
Using an incorrect battery type can lead to explosion risks. Dispose of
used batteries as per instructions. The product should only be connected to a
USB Interface of version 2.0 or higher. Ensure the adapter is easily
accessible and installed near the equipment.
FAQ:
-
Q: How often should I check the battery charging status?
A: It is recommended to check the battery charging status at vregular intervals to ensure optimal performance and longevity. -
Q: What should I do if the battery has been unused for an extended period?
A: If the battery has not been used for a long time, follow the storage instructions provided. If the battery shows no charge, do not attempt to recharge or use it; replace it with a new battery.
MORE CHOICE FOR YOUR
GROWING BUSINESS
Rugged Laptop IRX15
User Manual
MORE CHOICE FOR YOUR GROWING BUSINESS
Version History
| Date | By | Changes | Version |
|---|---|---|---|
| 2023-6-13 | Stan | Initial Version | 1.0.0 |
Product Introduction
Unpack
| No. | Description |
|---|---|
| 1 | Laptop |
| 2 | Charge Cable |
| 3 | Power Adapter |
| 4 | Bracket |
Using Battery
- Do not leave the battery unused for a long time, no matter it is in the device or inventory.
- The lifespan of a Li-ion battery is around 2 to 3 years, the battery capacity will be lower after circularly charged about 300 times. (One full battery charge period means completely charged and completely discharged.)
- When the Li-ion battery is not in use, it will continue to discharge slowly. Therefore, the battery charging status should be checked frequently and taken to reference the related battery charging information in the manuals.
- Observe and record the information of a new unused and non-fully charged battery. Based on the operating time of the new battery and compare it with a battery that has been used for a long time. According to the product configuration and application program, the operating time of the battery would be different.
- Check battery charging status at regular intervals.
- When battery operating time drops below about 80%, charging time will be increased remarkably.
- If a battery is stored or otherwise unused for an extended period, be sure to follow the storage instructions in this document. If you do not follow the instructions, and the battery has no charge remaining when you check it, consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a new battery.
- Store the battery at temperatures between 5 °C and 20 °C (41°F and 68°F).
TIP :
While charging, the device and the charger may become hot and stop charging.
This usually does not affect the device’s lifespan or performance and is in
the device’s normal range of operation.
Notes
- Using the incorrect type of battery has the danger of explosion. Please dispose of the used battery according to instructions.
- Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The connection to the so-called power USB is prohibited.
- The adapter shall be installed near the equipment and shall be easily accessible.
- The suitable temperature for the product and accessories is -20 to 50℃ (-4°F to 122°F).
- Caution : risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
Overview
Appearance & Device Layout
| No. | Description |
|---|---|
| 1.Front Camera | 2 MP camera for taking pictures and video calls |
| 2.Power Button | Turning the computer on and off |
| 3.P Button | Default used as the Windows key to open the desktop Start menu. |
| 4.Fingerprint Reader | For fingerprint recognition to unlock devices |
| 5.Touchpad & Touchpad Button | Move the cursor and select options |
| 6.Power Indicator | This indicator light stays on continuously after the system |
starts up when the power button is pressed
7.Charging Indicator| This indicator light will flash continuously when the
device is connected to the adapter for charging
8.Hard Disk Indicator| This indicator light will flash when the system is
performing read/write operations on the hard drive
9.Caps Lock Indicator| This indicator light stays on continuously when the
Caps Lock key on the keyboard is turned on
10.3G/4G Indicator| When the inserted 3G/4G SIM card is recognized by the
device, this indicator light will stay on continuously.
Device Front
| No. | Description |
|---|---|
| 1.HDMI | Used for transferring audio and video files to a projector or HDTV |
| 2.USB 3.0 port | USB data high-speed transmission interface, which can be |
connected to USB storage devices and plug-and-play USB devices
3.Wired LAN port| You can directly connect the Ethernet cable to this
interface to access the netwo
Device Bottom Side
| No. | Description |
|---|---|
| 1.Battery Cover Lock | Battery cover lock, press the buckle and slide the back |
cover in the direction of the arrow to open
2.Hard Disk Lock| Lock the inserted hard drive
3.POGO Pin| USB-defined expansion interface
USB-defined expansion interface
| No. | Description |
|---|---|
| 1.RS232 Serial Port | Used for connecting serial peripheral devices to a |
computer interface
2.USB 2.0/3.0| USB data high-speed transmission interface, which can be
connected to USB storage devices and plug-and-play USB devices
3.DC Jack| Device charging port
4.Headset Jack| For 3.5mm standard headphones, you can use a 3.5mm audio cable
to connect to a speaker to play audio files
---|---
5.SD Card Slot| Inserting an SD card can expand the storage space for the
device
Device Left Side
| No. | Description |
|---|---|
| 1.Hard Disk Expansion Interface | Used for connecting serial peripheral devices |
to a computer interface
Basic Functions
Install the SIM Card
Before installation, you need to remove the back cover of the laptop and then
insert the SIM card in the specified direction.
TIP
If the SIM card is not recognized after installation, please try to restart
your device. There are several screws when removing the back cover, please
find the screwdriver inside the package or use a 2mm screwdriver to remove it.
Turn Your Device on and off
Turn on Device
Before turning on the computer, it is recommended to connect the charger to
fully charge the battery Press the buckle to open the laptop.
- Press the buckle to open the laptop.
- Press the power button to turn on the device.
Turn off Device
Keyboard
Enter text through the keyboard or access computer functions.
TIP
Depending on the model and operating system, the images and available features
may vary.
The keyboard layout may differ by country/region.
Shortcuts
To use keyboard shortcuts, press and hold the Fn key and then press the
shortcut key.
Shortcut Key Functions
Touchpad
Use the touchpad to move the cursor or select items. The left and right
buttons on the touchpad function the same as the left and right buttons on a
mouse.
- Only use the touchpad with your fingers. The touchpad will not recognize actions from other objects.
- The touchpad gestures may differ from the Windows gestures.
Basic Touchpad Functio
Movement
To move the cursor, move your finger on the touchpad.
Click
Tap the touchpad or press the left button on the touchpad.
Double-click
Double-click the touchpad or press the left button on the touchpad twice.
Right-click
This feature enables the right-click function. To right-click on an item,
press the button on the right side of the touchpad.
Swipe
To scroll up, down, left, or right to the desired location, swipe with two
fingers on the touchpad.
Drag and Drop
To move an icon or application tile to a desired location, hold the item and
then drag it to the target location while pressing the left button on the
touchpad.
Shrink
To enlarge, spread two fingers apart when viewing websites, maps, or images.
Pinch to shrink.
Unlock Screen
-
To unlock the locked screen, please perform one of the following operations:
- Mouse: Click the locked screen. Keyboard:
- Press any key.
- Touchpad: Tap the touchpad.
If your account has a password, enter the password to log in after unlocking the screen.
-
Set up fingerprint
- Open Settings( Accounts Sign-in options
Select the”Windows Hello Fingerprint” to Record fingerprints.
About Windows Activation
- When you first turn on the computer, the Windows activation screen will appear. Please follow the instructions on the screen to activate the program and use the computer.
- If you are unable to activate your device when it is connected to the internet, please refer to the following diagram and try activating it again after synchronizing the time zone.
FAQ
Handling swollen Lithium-ion batteries|
---|---
Swollen battery may impact the performance of the laptop. To prevent possible
further
damage to the device enclosure or internal components leading to malfunction, discontinue the use of the laptop and discharge it by disconnecting the AC adapter and letting the battery drain.
|
Solution:
1. Please remove the faulty battery and replace it with a new laptop battery
2. Please contact a technical engineer for professional support from the
after-sales team.
Note: Please dispose of faulty batteries properly to avoid dropping or
puncturing the batteries.
Laptop won ‘ t turn on
Usually due to battery failure, please connect the AC adapter and make sure
the computer is charging
Please contact the specialized technical team and we will provide you with
free support.
Laptop with water or dust
Please place the product in a well-ventilated and dry place and let it stand
for 30 minutes; Ensure that the moisture has been removed before attempting to
start and save the data.
If the problem has already occurred, please contact our technical support for
after-sales repair services.
Note: Ensure that the protective plug on the unit is secured when soaking in
water or dusty environments to ensure no liquid enters the connector.
Operating Environment
Operating -20 °C to 60 °C
Storage Temperature -30℃~ 70℃
Environment Humidity 95% non-Condensing
Network Connections
WIFI: Please make sure that WiFi is properly configured on the router as well
as the device
Bluetooth: Keep the Bluetooth can be received within range, reconnect the
device
2G/3G/4G Ensure the band in the zone supports LTE-FDD: B1/3/5/7/8/20 LTE-TDD:
B40
If you are still unable to connect, please contact a technical engineer for support
Rugged laptop Driver
Driver link: http://u.pc.cd/g3V
If the driver you need is not in the file, you can contact a technical
engineer for further information.
Recovering the operating system
When your computer is unable to boot to the operating system even after
repeated attempts, Please try reinstalling Windows system
1. Please contact a technical engineer to get a ISO of your Windows computer.
2. Downloaded and installed through the Microsoft website
Link: https://www.microsoft.com/software-download/winows11
Rugged Laptops have a professional after-sales repair department If you meet any problem during using the IRX15, please contact us.
WhatsApp
+8613302482997
Jim, Technical Engineer
Skype
+1 650 206 2250
support@munbyn.com
munbyn@outlook.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>