MUNBYN ITPP941 Logistic Label Printer User Guide
- June 3, 2024
- MUNBYN
Table of Contents
Logistics Label Printer
USER GUIDE
MUNBYN
More Choice
For Your Growing Business
Product Introduction
What’s in the package?
- Printer
- USB Cable
- Adapter
- Power Cord
- Quick tips
- Labels
- User Manual
- If contents are missing or damaged, please contact us
Printer Overview
Set Up The Printer
Recommended:
Watch the short setup video at:
Quick printer connection
• Please follow the sequence of the above picture to operate
Label setup
Automatic label identification:
- Load no less than 4 consecutive labels into the printer.
- After the paper is stable, press and hold feeder button, until you hear a beep.
- Then, the printer will automatically label identification.
Driver installation
For the latest driver, please visit:
www.munbyn.biz/941d
- Please run the downloaded software from the web address indicated above and follow the prompts to complete installation.
Windows Driver Installation
Mac Driver Installation
Pro Tips
- Anytime you change your label, run the automatic label identification.
- Press the feeder button on the printer to skip a blank label.
- To run a self-test, press and hold the feeder button until you hear two short beeps.
- Avoid poor quality labels as they can damage the printer.
- Regularly clean the printer head.
- If the paper is jammed and the red light flashes, run Automatic label identification.
- Insert Munbyn into the same USB port on your computer every time. This will avoid creating duplicate copies of the printer in your operating system..
FAQ
file, please visit:
LED Status
Light
| Description|
Troubleshoot
---|---|---
Green
|
Normal operation
|
/
Flashing Red (every 2 seconds)
| Label paper is not identified|
Pun automatic label identification
Flashing Red (every 1 second)| Cover is not closed| Check that the cover is
completely closed
Printer head is overheated| Printer head is overheated| Printer will
automatically resume once the printer head has cooled down
Feeder Button Instruction
| Printer status | Feeder button | Function |
|---|---|---|
| Printing | Press the button | Pause printing |
| Standby | Press and hold on until you hear one beep | Automatic label |
identification
Standby| Standby Press and hold on until you hear five beeps| Reset Printer
Specification
| Method | Direct Thermal |
|---|---|
| Resolution | 203 dpi |
| Max Printing Speed | 150 mm/s |
| Paper Width | 40-110 mm (157-43 inches) |
| Paper Thickness | 0.06-025 mm |
| Power Adapter | 24V/2A |
| Printing Life | TPH 100km |
| Operating Environment | Temperature: -10 to 50°C Humidity.10-90% (non |
condensing)
Storage Environment| Temperature: -40 to 80 °C Humidity:5-95% (non
condensing)
Connection| USB
Weight| 1.90 lbs / 0.9kg
Dimensions| D198 mm W 96mm H 109 mm
Safety Notices
- The printer head can become very hot after printing labels. Do not touch the printer head.
- Do not bend the power cord excessively or place objects on the cord.
- Do not use the printer if you find any irregularities as these could result in fire or electrocution.
- Keep the printer out of reach of children.
- Use only approved accessories and do not try to disassemble, repair the unit by yourself.
- Keep the printer away from water and other objects that could penetrate the components.
- Please unplug the printer when it is not in use for long periods.
Tech Support
E-mail: [email protected]
Whatsapp: +8617817881067
Phone +1 403 477 1911
Skype: munbyn
Support time Monday to Friday 24 hours.
MUNBYN provides 18 months warranty and lifetime free service. If you encounter any issues with the product, please contact the MUNBYN team to promptly receive trouble-shooting tips or a replacement.
Website:
www.munbyn.com (how-to videos, warranty details)
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.