MUNBYN ZCS-Z91 All -in-One Handheld Thermal POS Printer User Manual
- June 5, 2024
- MUNBYN
Table of Contents
MUNBYN
Commercial PDA
IPDA091 Manual 
Guangzhou MUNBYN Information Technology Co., Ltd.
Add: 329 3rd Floor, Tairong Business Center, No. 63 Xizang Road, Liwan
District, Guangzhou, China
Introduction
Z91M Android airtime POS with printer & fingerprint collection module(optional) , android 9.0 operating system, 5.5-inch screen touch, super long standby battery capacity is 2800 mAh/7.4V, thermal paper printer, 5 Mega- pixel camera, 2G / 3G / 4G /wifi, Bluetooth communication, this fine workmanship, and the top quality machine is the best choice in the market.
Feature
- Android 9.0 operating system: Adopting the open android system, which can let the user a simple and efficient development of the upper application.
- Serviceable range: apply chain supermarkets, restaurants, Parking system, Prepaid airtime top-up, convenience stores, clothing store, premises, bakery, cashier, pay, enters sells saves the business management function.
Technical Specification
ZCS-Z91
Operating System
CPU model| Android 9.0
MTK Quad-Core Processor
CPU Clock Range| 1.3GHz
RAM| 2G DDR3
FLASH| I6GB
LCD Screen| 5.5 inch
Display Resolution| 720*1280
Backlit| LED
Touch Screen| Capacitive Five-Point Touch
Fingerprint collection module(optional)
Conminnieanos.
Voice call| Spatial resolution :508 DPI
Active sensor area :12.8mms18.0mm
4G: FDD-LTE,TD-LTE
3G: WCDMA
2G: GSM, GPRS
WIFI, 802.1Ia/b/en, 2.46+50
Bluetooth
Support
Data| Support
SMS&MMS| Support
WIFI Module| 802.11a/b/g/n, 2.46-I-50
Bluetooth
GPS| Sumo!’
---|---
Support
USB| USB 2.0(0TG)
Rear Camera| 5 Mega-pixel
Speaker| Support
Microphone| Support
Card Slot| SIM x2; SDxl(support SD3.0. tip to 128GB)
Physical button| power button x 1
Dimension| 199.75mm x 83mm x 57.5mm
Weight
Battery| 4I4g (one package box including product is 750g)
Lithium Battery
Battery Capacity| 7.4V 2800mAh
Power adapter| 5V DC/2A
Standard NFC reader| Support ISO / IEC 14443 A&B, Mifare, felica card, conform
to EMV / PBOC PAYPASS standard ,(Option)
Printer| Paper width:58mm
Max. paper roll diameter:40mm
Charging indicator light
Standard Accessories| Single color LED
1pc power adaptor, 1pc User Manual, 1pc USB-type C cable, I
roll 58mm thermal paper
Optional Accessories
Temperature| Silicon case, Hand Belt, Fingerprint scanner
Storage temperature: -10°C-60°C
Working Temperature: 0°C-50°C
Certificate| FCC, CE,RoHS
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Additional information on Specific Absorption Rates (SAR) can be found on the
Cellular
Telecommunications Industry Association (CTIA) website at http://www.wow-
com.com. * In the United In states and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial margin of safety to give
additional protection to the public and to account for any variations in
measurements.
SAR compliance for body-worn operation is based on a separation distance of 0
mm between the unit and the human body.
Carry this device at least 0 mm away from your body to ensure RF exposure
level compliance or lower than the reported level. To support body-worn
operation, choose the belt clips or holsters, which do not contain metallic
components, to maintain a separation of 0 mm between this device and your
body.
RF exposure compliance with any body-worn accessory, which contains metal, was
not tested and certified, and the use of such body-worn accessories should be
avoided.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>