GUANGZHOU P1 Wireless Switch Panel User Manual

GUANGZHOU P1 Wireless Switch Panel

Specifications

• Model: XYZ-2000
• Power: 120V, 60Hz
• Dimensions: 10 x 12 x 8 inches
• Weight: 5 lbs
• Material: Stainless steel

Product Information

The XYZ-2000 is a versatile kitchen appliance designed to simplify your cooking experience. With its durable stainless steel construction, this product is built to last. It features a compact design, making it ideal for small kitchens or limited countertop space.

Product Usage Instructions

Operating the XYZ-2000
Plug the appliance into a power outlet with the provided cord. Use the control panel to select the desired settings such as temperature and cooking time. Follow the specific instructions for the type of food you are preparing.

Cleaning and Maintenance:
Unplug the XYZ-2000 and allow it to cool before cleaning. Remove any food residue with a soft sponge or cloth. The removable parts are dishwasher safe for easy cleaning. Wipe the exterior of the appliance with a damp cloth and dry thoroughly.

Frequently Asked Questions (FAQ):
Q: Can I use the XYZ-2000 to fry foods?
A: Yes, the XYZ-2000 can be used for frying, baking, grilling, and more. Refer to the user manual for specific instructions on different cooking methods.

WIRELESS SWITCH PANEL USER MANUAL

Switch Panel Installation:

Control Box Installation:

Switch Panel Installation

Control Box Installation

Gang Wiring Diagram:

circuit fuse block:

Specification:
Voltage : 12V /24V DC Power : 720W at 12V /1440W at 24V
Maximum Current : 60A Operating Temperature : – 40°C to 85°C

Gang Wiring Diagram

circuit fuse block:

Specification:
Voltage: 12V/24V DC Power : 960W at 12V /1920W at 24V
Maximum Current : BOA Operating Temperature : – 40°C to 85°C

Wiring Method

Connect light to control box, and negative wires can be connected to the common cathode

HOW TO PAIR SWITCH PANEL WITH CONTROL BOX?

• Note: Our factory settings have already paired them for you.
• In normal circumstances, you don’t need to pair them again.
• However, if there are special circumstances where you need to re-pair, follow these steps.

1. Power on the Control Box, press and hold the pairing button.
   At this point, the Control Box’s indicator light will flash red, indicating it’s in pairing mode.

2. Press and hold the RGB button on the Switch Panel. The Switch Panel’s backlight will turn red, and simultaneously, the Control Box’s indicator light will stay red, indicating a successful pairing.

CONTROL MODE SETTING

1. CONSTANT LIGHT:
   DEFAULT CONSTANT LIGHT, YOU DO NOT NEED TO SET IT

2. MOMENTARY MODE:

   • Long press the brightness adjustment button for 1 second.
   • When the red backlight flashes, it enters the Momentary setting state
   • Press the button you want to set (you can choose between 8 or 12 buttons for Momentary Mode),  then press the ON/OFF button to confirm, now the setting is successful
   • Press the ON/OFF button again to exit the setting mode

3. STROBE MODE:

   • Long press the brightness adjustment button for 1 second, and the red backlight flashes (note: this is the Momentary setting state, please refer to its specific steps)
   • Then short press the brightness adjustment button.
   • When the blue backlight flashes, it enters the Strobe setting state
   • Press the button you want to set (you can choose between 8 or 12 buttons for Strobe Mode), then press the ON/OFF button to confirm, now the setting is successful

Button Introduction

ON/OFF
Switch with memory function, remember last setting automatically

1. Short Press -5-level brightness adjustment(100%, 75%, 50%, 25%, 10%),
   Each time you press it, you switch the brightness to a different level

2. Long Press – Enter the setting mode, and choose between momentary mode and strobe mode, Long Press again to exit the setting mode

3. Short Press – Switch single color (loop from 1-8 in order)

4. 1.red 2.orange 3.yellow 4.green

5. 5. cyan 6. blue 7. purple 8. white

6. Long Press -Switch between Gradient/ Jump/ Breathing(loop from 9-11 in order)

7. 9.Gradient: red-orange-yellow-green-cyan-blue-purple

8. 1 O.Jump: red-orange-yellow-green-cyan-blue-purple

9. 11.Breathing: red-orange-yellow-green-cyan-blue-purple

FREQUENTLY ASKED QUESTIONS

1. Q1: What is the maximum running current?
   A 1 : The 8 Gang Switch Panel is rated for 60A, and the 12 Gang Switch Panel is rated for 80A.

2. Q2: Can I connect negative wire to the common cathode?
   A2: Yes.

3. Q3: How do I know if the wiring is correct?
   A3: If the power indicator is red on, means the connection is correct.

4. Q4: What is the function of the control box switch?
   A4: The Control Box Switch provides two ways to obtain power: Connect ACC or Battery. It is suggested to obtain power from battery

5. Way1: Sliding switch to the side of the power indicator, means obtain power from battery.

6. Way2: Sliding switch to the side of the 2-PIN terminal,  means obtain power from ACC.

7. QS: What type of Add-a-Circuit Fuse Tap?
   AS: Small fuse tap.

8. Q6: The Control Box has a black wire antenna. Can it be disconnected?
   A6: It cannot be disconnected. It’s recommended to let the antenna extend outside the box for better communication range.

9. Q7: The Switch Panel won’t charge?
   A7: Some phone chargers that use a Type-C to Type-C cable may not be able to charge the panel due to an internal recognition chip. Please try using a different charging cable.

10. Q8: The Control Box isn’t responding?
    A7:

11. Step 1. Check the product to ensure it’s properly powered.

12. Step 2. Try re-pairing (refer to the pairing instructions). If you still can’t control it, record a video and contact our customer support. We will quickly assist based on the video’s situation.

13. Q9: The Control Box is connected to the car battery, and the power indicator light stays on.
    Will it drain the car battery?
    A9: No, it won’t. This product has a standby current less than a 3mA 60AH battery. The battery can support the switch panel under standby status for 833 days without charging.

FCC Caution.

Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

Changes or modification warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device:
The device has been evaluated to meet general RF exposure requireme nt. The device can be used in portable exposure condition without restriction.
According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines.
According to KDB 447498 (2)(a)(i)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>