Ahqlab P20-W-01 Wireless Weight Measurement Instruction Manual
- June 6, 2024
- Ahqlab
Table of Contents
P20-W-01 Wireless Weight Measurement
Instruction Manual
WIFI Setup
-
Insert 4 AA batteries under Scale
-
Download ESPTouch app to the user smart device for WiFi setting
https://play.google.com/store/apps/details?id=com.khoazero123.iot_esptouch_demo -
Move the switch under Scale to SET(Right side)
-
Run ESPTouch app and Enter the ID & Password of AP that is connected with Scale
Weight Measurement
-
Insert 4 AA batteries under Scale
-
Move the switch under Scale to ON(Center)
-
Measure the object between 0.5~25kg
-
Transfer the measured weight to the server
-
Run Measure app and check the transferred weight from server
SCALE User Manual
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
RF Exposure Statement
A minimum separation distance of 20 ㎝ must be maintained between the antenna
and the person for this appliance to satisfy the RF exposure requirements.
This “SCALE” product is an animal-only product for all sales and marketing
purposes.
Apply the same to your document or application, including As a responsible
party it clearly states that it is intended for use as an animal-only product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>