ricoo S3422 TV Wall Mount Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo S3422 TV Wall Mount
Product Information
The product is a screen mount that supports displays with VESA hole distances. It has a load weight capacity of minimum 5kg (11lbs) and maximum 30kg (66lbs). The package includes various components such as screws, spacers, and wall anchors.
VESA Hole Distance:
VESA hole distance refers to the distances between the mounting holes on
the back of the screen. It is important to check the VESA hole distance on
your display before installation.
Warning:
Do not exceed the listed load weight as it may result in property damage or
serious injury.
Product Usage Instructions
Step 1:
Before starting the installation, ensure that you have all the components
from the package.
Step 2:
Identify the VESA hole distance on your display. It should be within the
minimum and maximum distance ranges mentioned in the product information.
Step 3:
Choose the appropriate screws (M-A, M-B, M-C, M-D, M-E, M-F) based on the
thickness of your display. Use the plastic spacers (M-G) if the screws (M-D)
are too long.
Step 4:
Attach the wall anchors (W-A, W-B, W-C) to the wall. Make sure to use solid
concrete walls for proper support.
Step 5:
Mount the screen mount to the wall by aligning the VESA mounting holes on
the back of the display with the corresponding holes on the mount. Use the
appropriate screws and spacers.
Step 6:
Ensure that the mount is securely attached to the wall and the display is
properly aligned.
Step 7:
Double-check all the connections and make any necessary adjustments.
Step 8:
Once everything is properly installed and aligned, the setup is complete.
Step 9:
If you encounter any issues or have further questions, you can contact
customer support via email at support@ricoo.de or
visit the website www.ricoo.eu.
Note: It is recommended to use a professional bubble level during the installation process for accurate alignment.
Assembly Instructions
Warning: Do not exceed listed load weight. Property damage oder serious injury may occur!
Please check BEFORE installation distance between VESA mounting holes on your
display!
This screen mount supports VESA hole distance in the minimum and maximum
distance ranges given above.
VESA – Hole distance = Distances between the mounting holes on the screen
back.
UNPACKING
Scope of delivery
We recommend using a professional level.
The numbering on the plastic bag may differ/missing completely!
NOTE: READ THE ENTIRE INSTRUCTION MANUAL BEFORE YOU START INSTALLATION AND ASSEMBLY
Please note: Images in these assembly instructions are only technical
presentation of the product. Actual product design may vary minimally.
Do not begin the installation until you have read and understood all the
instructions and warnings contained in this installation sheet. If you have
any questions regarding any of the instructions or warnings, please contact
your local distributor. This product was designed to be installed and used
ONLY as specified in this manual. Improper installation of this product may
cause damage or serious injury. This product may only be assembled/installed
by the technical staff. Make sure that the supporting surface will safely
support the combined weight of the equipment and all attached hardware and
components. Always use an assistant or mechanical lifting equipment to safely
lift and position the equipment.
Make sure that before and after the installation of the product neither you
nor somebody else can be injured and other objects can be damaged. In case of
doubt request for help from an expert. This product is intended for indoor use
only. Using this product outdoors could lead to product failure and personal
injury. Tighten screws firmly, but do not over tighten. Over tightening can
cause damage the items, this greatly reduces their holding power.
By reason of large television construction types on the market, we can’t
adjust our screen installation materials for each screen type. Therefore it is
possible that the screws which are numerously delivered don’t fit with your
TV/Monitor. We ask for your understanding that we can’t cover up all
possibilities of many screen types.
Each wall is built up of different materials which can result a special
requirement. Therefore we are concentrated on the delivery of installation
materials only for mass concrete walls. Use our included installation
accessories only for mass concrete walls.
When mounting on the wooden beams wall, make sure that the fastening screws
are anchored in the center of the beams. It is highly recommended to use a
beamfinder. If your walls have a special demand of materials, we advise you to
ask in an expert shop for a suitable acquirement of the installation
materials.
Warning: Supplied plastic anchors are only suitable for solid concrete walls!
Use the matching screws and spacers for your display.
If the screws “M-D” are too long, use the plastic spacers “M-G”. (like in Step 4 B)
Use the matching screws and spacers for your display
DURING THE LATER REMOVING OF THE DISPLAY MAKE SURE THE FRONT ARM IS ON TOP
BEFORE TAKING OFF THE DISPLAY!
Attention: The arm can shoot up upwards because of the gas pressure spring! If
you don’t pay attention you can be injured.
E-Mail: support@ricoo.de
www.ricoo.eu
E.N.Z. Engineering GmbH
Salzmatten 6
79341 Kenzingen
(Germany)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>