Guangzhou Palemay photoelectric technology Co LTD 2BF7X6090APP Bluetooth RGB Light with Controller User Manual
- June 1, 2024
- Guangzhou Palemay photoelectric technology Co LTD
Table of Contents
Guangzhou Palemay Photoelectric Technology Co LTD 2BF7X6090APP Bluetooth
RGB Light with Controller
Product Information
Specifications
- Input voltage: 5V 12V 24V
- App compatibility: Android 4.4 and above, iOS 11.0 and above
Product Usage Instructions
App Usage Instructions
To control the Bluetooth RGB light with the controller, follow these steps:
- Download and install the mobile control app by scanning the QR code provided.
- Turn on the Bluetooth function on your phone and allow relevant access permissions.
- Turn on the light strip power.
- The app will automatically scan and add nearby light strip devices that can be connected.
Operation Instructions
- Scroll the selection mode
- Adjust speed
- Adjust brightness
- Style mode
- Mic mode – Change the sensitivity of the MIC
- Select sound source
- Adjust the color – Adjust frequently used colors Classic colors
Attention
- Ensure the input power supply matches the voltage of the light strip used to avoid damage.
- If unable to connect to the light strip, check Bluetooth settings and connectivity status.
Warning
Changes or modifications not approved may void the user’s authority to operate the equipment.
NOTE
This device complies with FCC Rules regarding operation and radiation exposure limits.
FAQ
Q: What should I do if the app cannot connect to the light strip?
A: Check if Bluetooth is turned on, ensure no other device is connected, and consider restarting the app or light strip.
APP usage instructions
Attention
- Please ensure that the input power supply matches the voltage of the light strip used.
- Using the wrong input power supply may cause damage to the controller or light strip.
- If the app cannot connect to the light strip, please check if the Bluetooth function of the phone is turned on and if the light strip is connected to another phone.
- The app can be restarted or the restart light can be tested with compensation.
Operation instructions
Bluetooth RGB light with controller
Parameter Description:
- Input voltage: 5V□ 12V□ 24V□
- The app supports Android 4.4 and above and IOS 11.0 or above
APP instructions
- Please scan the QR code on the right to download and install the mobile control app. And turn on the Bluetooth function of the phone and allow relevant access permissions.
- Turn on the light strip power, and the app will automatically scan and add nearby light strip devices that can be connected.
FCC Statement
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used under the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with the FCC Radiation exposure limit set forth for
uncontrolled environments.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>