Guangzhou Chengzhi GL10 Gimbal Searchlight User Manual
- May 15, 2024
- Guangzhou Chengzhi
Table of Contents
Guangzhou Chengzhi GL10 Gimbal Searchlight User Manual
I. Disclaimers and Warnings
Thank you for purchasing our intelligent product. The contents mentioned in
this article are related to your safety and legitimate rights and
responsibilities, so please read this article carefully to set up the product
correctly before using. Harms of hurting you or the people around you or this
product or other surrounding items may be caused as a result of failing to
follow the instructions and warnings herein. The right for final
interpretation of this article and all related documents is vested in CZI.
Subject to update
without notice. Please visit www.gzczzn.com for the
latest product information.
Warnings
The GL 10 Gimbal Searchlight is a precision optical device. In case of any
hardware issues, please contact our after-sales service for assistance. Do not
attempt to disassemble or repair the device yourself, as it will void the
warranty and service eligibility.
Precautions
l. The GL 10 Gimbal Searchlight operates at a default power limit of 30%
before the drone takes off (the power can be manually adjusted to 50% or
100%). After takeoff, the power can be increased to 100%.
2.During the operation of the GL10 Gimbal Searchlight, please avoid direct
contact with the outer shell of the light as it may cause burns by high
temperature.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– – Reorient or relocate the receiving antenna.
– – Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance of 20cm the radiator
your body. This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter.
II. Introduction to GL 10 Gimbal Searchlight
The GLl0 Gimbal Searchlight is the first lightest gimbal searchlight in the industry, designed specifically for the DJI Mavic 3 industrial drone, weighing less than 140g and with a rated power of 20W. The GLl0 Gimbal Searchlight features an optical imaging lens structure with an emission angle of 13°. By connecting to the DJI Pilot 2 APP, you can control the power switch, switch between steady light and flashing modes, and the light will automatically follow the movement of the gimbal camera. The GLl0 Gimbal Searchlight is equipped with an advanced automatic temperature control system, ensuring that the light attenuation is less than 5% after 1000 hours of operation.
- Red and blue light
- White spotlight
- Anti-loose screw
- Power and communication port
- Reset button
- Indicator light
Technical Parameter
III. Activation Tutorial for GL10 Gimbal Searchlight
3.1 Activate in the czi sound APP
3.1.1 Open the czi sound APP, register, and log in to your account. Enter the main interface and click on Connect Device.
3.1.2 Select the Available device.
3.1.3 Click on Activate Now.
3.1.4 The interface displays the Product serial number (e.g., lPNX) and Activation time (e.g., 2023-06-27), indicating that the device has been successfully activated.
3.2 Activate in the czi Pilot app
3.2.1 Properly install the GL10 Gimbal Light on the drone. Enable Bluetooth on the remote controller and open the czi Pilot APP. Search for and connect to the GL10 device. Click on Activate.
3.2.2 Activation notice po pup. Follow the instructions and click Agree.
3.2.3 Successfully activated.
IV. User Manual for GL10 Gimbal Searchlight
4.1 User Manual for OJI Pilot 2
4.1.1 Install the GLlO on the drone and tighten the screws securely.
4.1.2 Power on the drone correctly (short press for one second or long press
for three seconds) to start the drone.
4.1.6 Introduction to GLlO Gimbal Searchlight Control Buttons.
4.2 czi Pilot User Tutorial
4.2.1 Install the GLlO on the drone and tighten the screws securely. Open the czi Pilot app on the remote controller.
V. Firmware Upgrade Tutorial for GL10 Gimbal Searchlight
5.1 Upgrade using DJI Assistant 2
5.2 Upgrade in czi sound APP.
5.2.1 Enter the czi sound APP.
5.2.2 Connect the devices.
5.2.3 Click on Check for upgrade.
5.2.4 Select local bin file.
5.2.5 Waiting for upload.
5.2.6 Waiting for upgrade.
ChengZhi Support
www.gzczzn.com
Service hotline: 400-008-8306
If you have any questions or suggestions about the instructions, Please
contact us through the following email address:
service@gzczzn.com
Printed in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>