Taymor D4364 Deadbolts Commercial Deadbolt Installation Guide
- June 15, 2024
- taymor
Table of Contents
Taymor D4364 Deadbolts Commercial Deadbolt
Safety Information
Read the precautions and instructions in this manual before installing and using this lock. Save this manual for future reference. If the door needs to be drilled, be familiar with how to use your drill safely, and understand
WARNING
- If the door needs to be drilled, be familiar with how to use your drill safely, and understand all the door preparation steps before proceeding.
CAUTION
- Before beginning the installation, please read and understand the entire manual.
NOTE
- To ensure a long lasting finish, remove the locks, or do not Install the locks, prior to painting your door.
- Periodically clean the locks with mild soap and a soft cloth. Do not use abrasives or harsh chemicals, and avoid sharp or scratching objects.
Pre-Installation
Pre-Installation -Tools Required/Hardware Included
Note: Not to scale.
Part / Description
Single cylinder
Door Preparation
NOTE: If your door already has holes, skip to Installation.
Using the template, mark the door and drill the holes, and chisel out a mortise
NOTE : Drill from both sides to avoid wood splitting.
Prepare the door jamb – using the strike plate as a pattern, drill the latch and screw holes, and chise out a mortise until the strike plate fits flush.
NOTE: To assure proper lockset function, the holes in the door jamb must be drilled 1-1/8 ” (28 mm) deep.
DIMENSION
TEMPLATE
NOTE: Double check your product for the correct hole sizes.
Installation
INSTALLING THE LATCH
Attach the correct faceplate
Set the latch backset
- Fixed Latch With 2-3/8″(60mm) Or 2-3/4″(70mm) Backset can not be adjusted.
CAUTION: Be sure the latch cam is upright before making any backset adjustment.
Install the latch
INSTALL CYLINDER DEADBOLT
INSTALLING THE STRIKE PLATE
CUSTOMER SERVICE
- WESTERN CANADA: 1-800-267-4774
- EASTERN CANADA: 1-800-387-7064
- USA: 1-800-388-9887
- taymor.com
Please select text to grab.