GUANGZHOU YOUGUANG OPTOELECTRONICS CO LTD CHR07B 32 Inch Digital Charging Lit Holder User Manual

GUANGZHOU YOUGUANG OPTOELECTRONICS CO LTD CHR07B 32 Inch Digital Charging

Lit Holder

Product Information

• Specifications
  • Model: 6TFS.BOVBM
  • Brand: QFK’LJLWDO
  • Function: FKDUJLQJ/Olw KROGHU
  • Power: 9#

Product Usage Instructions

• SURGXFW Instructions:
  • Ensure the SURGXFW is properly connected and powered on before usage. Follow the specific instructions provided for optimal performance.
• VDIHW Instructions:
  • Handle with care and follow the guidelines for proper installation and usage to avoid any damage. Refer to the manual for detailed instructions.
• FRPSRVLWLRQ Instructions:
  • For proper functionality, make sure to adjust the settings as per your requirements. Consult the manual for detailed steps on customization.
• ZDUUDQW Instructions:
  • When using ZDUUDQW, ensure it is securely attached and functioning correctly. Refer to the manual for any troubleshooting steps.

FAQs

• Q: How do I troubleshoot if the product does not turn on?
  • A: Check the power source and connections. If the issue persists, contact customer support for further assistance.
• Q: Can I use the product outdoors?
  • A: Refer to the product specifications to determine if it is suitable for outdoor use. Avoid exposing the product to extreme weather conditions.

Product Information

Product feature

32-Inch Digital Charging Lit Holder is a Floor Standing LCD charging station with a Brochure Holder with an elegant frame design, a 32″ high-quality LCD screen, a Signway control board and a UL/CE power supply embedded inside, which is capable of having a wireless, Ethernet, cloud platform and USB program edit, playback for advertising, education, commercial and every kind of communication use at everywhere in the place you want.

Product Composition

Standard Accessories

Standard Accessories Quantity Table

Assembly

Fixing the base and the LCD frame with the M8x20 screws provided

Product Technical Data

Safety Warnings and Precautions

Based on the product design and LCD property, the following security works must be complied with in the device handling and use.

• Avoid high temperature and high moisture circumstances use: operating temperature 0~50°C; operating humidity 10% ~90%
• Suitable operating time: 20 hours a day or less
• Suitable voltage input: 100~240v, excess voltage will cause damage to the device
• Keep away from strong electromagnetic circumstances: strong electromagnetic waves will cause damage to the device
• Be used in ventilated circumstances: well- ventilated environment would be better for the device use
• Avoid excessive vibration, heavy drop and severe impact: any heavy vibration, drop and impact will cause damage to the device
• Do not replace or modify product parts by yourself: we will not be responsible for any product problems of the device caused by self-adjustment. This is a non-water-proof product, so please be sure to avoid water leaking into the product.
• To have regular cleaning work: regular cleaning work is good for the device’s operation

Product installation

Terminology of the product:

• The product: The whole product, including hardware and software of the front-end display device and back-end content software platform.
• The device: front-end display device which is shown on the cover page of this manual.
• GTV: the display software applied on the front-end device management. Please refer to the “Signway DS Player Software_Android_Manual_V1.0_140609” PDF for the details.
• CDMS: the content management software applied on the back-end content edit, program produce, program publish.. etc. management. Please refer to the “Digital Signage CDMS_Manual_V4.6.20” PDF for the details.
• Android: Android is an operating system based on a modified version of the Linux kernel and other open-source software, designed primarily for digital devices. The product was developed based on the Android system.

Set up the product and the way to access

• Open the device’s back bracket, place it on a flat floor, and connect the AC power
• Turn on the power switch, make sure the LCD is on and the IR indicator, blue light on the surface, is on as well.
• Make sure the mouse or the remote control works well (we recommend using the mouse which is a more efficient tool )
  • mouse: connect a wire or wireless mouse by using the USB port on the back of the device

Remote Control

Two ways to configure the device

• Through the GTV Home page (also called the OSD menu)
  • When the device is turned on, the system will enter into the GTV home page at once and playback mode being active automatically, then if there is a program ready for playback, either source from ROM or USB storage, the program will playback immediately.
  • But if there is no program ready, the GTV home page shown below will stand still for further action.
  • At this moment, you can press the button on the remote control or click on the upper left corner of the GTV home page and enter into the system settings page as below, then you can go on for language, work mode, network, time… configuration.

Through the Android home page :

• When the device is playing, press to return to the GTV home page. At that moment, press sequentially to act exiting GTV and entering the Android home page. Afterwards, you can click on the page or click Android menu first and then click O, on the Android menu page to enter into the Android setup page for device configuration. After configuration, click to come back to GTV and have playback again.

Certain settings are required before playback

• Language:
  • English is the default language set in the factory, you can choose to select Simple Chinese or Japanese as you want by pressing .
• Work mode: there are two major categories of work mode: network and stand-alone
  • Network: It means to upload programs to the device by the network, which is divided into wired (LAN), wireless(wifi) and 3G according to the upload path used.
  • Stand-alone: It means to upload programs to the device by USB manually. You should click Work Mode and select “Single” and you have to activate the USB on the System Setting page at the same time, then the device will recognise USB storage and upload the program inside when the USB is inserted into the USB port.

Network setting :

• When you select one of the network paths as your Work Mode, you must ensure that the network environment is properly set and available.
• If you have the correct setting, you will see the server address (web IP) shown on the page below.
• Content Edit and Playback
  • Cloud CDMS server platform
  • We have set up a cloud CDMS server platform on the web to serve our customers. Please have your account and password and enter the website by using the computer.
  • http://47.52.207.18:8088/cdmsA/index.jsp.

Content edit and produce program

• After logging the cloud CDMS platform, you can edit content, produce programs, create display plans and publish programs to the devices on the platform.
• CDMS is a powerful platform for your displays, including images, text, video, audio or a complex, please refer to the “Digital Signage CDMS_Manual_V4.6.20” PDF for the details of operation.

Content upload and playback

• As mentioned on 2.4.2 Work mode, there is two ways of uploading programs to the devices,
• Network: Be sure your device network is fully configured and functioning well, then you can publish programs to the devices easily.
• USB: In a stand-alone (single) scenario, you need to configure to activate USB first, as shown in >>”System Setting page-USB” on 2.4.2, download programs from the CDMS platform to your USB storage and insert the USB into the USB port of the device, then the device will recognize the USB, upload program and playback automatically.

Product Warranty and Maintenance

Warranty Policy

• The product provides a one-year warranty starting from the ex-work delivery date under the premise of normal and reasonable use of the product.
• Any unauthorized replacement of parts and components and wiring changes are deemed to be a violation of normal and reasonable use, and we will not perform the warranty responsibility

Product Maintenance

• Regular cleaning on the product including dedusting of the surface and frame is required
• Following through the use precautions mentioned in “1.4 Safety Warnings and Precautions” above is the most basic maintenance work.
• In case of a failure, please Inform the manufacturer and have maintenance operations by a qualified person under the manufacturer’s guidance.’

FCC

FCC WARNING

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>