HYUNDAI HY-Y10 True Wireless Earphones User Manual
- August 2, 2024
- HYUNDAI
Table of Contents
- HYUNDAI HY-Y10 True Wireless Earphones
- Usage Instruction
- Packing list
- Product schematic description
- Product specification
- Charge the Charging case
- LED Indicator Status
- Product operating instructions
- Touch control button operating
- Restore factory settings
- Warranty Service
- FCC Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HYUNDAI HY-Y10 True Wireless Earphones
USER MANUAL
Please read all instructions carefully
Usage Instruction
(1) Don’t attempt to disassemble the unit and change any part, except there is
operation method mentioned in the manual.
(2) Don’t expose the unit to liquid, moisture or humidity, since it is not a
waterproof product.
(3) Disconnect the unit with your BT device and move it to the safe area if
the liquid get inside the unit.
(4) Don’t assemble or disassemble the unit to avoid electric shock, if there
is water on your hands.
(5) Don’t expose the unit to extremely high temperature or dispose of the unit
in fire as it will result in an explosion.
(6) Don’t place the unit in an electromagnetic interference environment to
avoid malfunction.
Packing list
Product schematic description
Product specification
- Bluetooth version: VS.4
- Transmission distance: l0M
- Battery capacity: 25mAh
- Usage time: approximately 4 hours {headphones)
- Charging time: approximately 1.5 hour (for headphones)
- Rated input: 5V–35mA
- Charging case specification
- Battery capacity: 300mAh
- Charging time: approximately LS hours
- Rated input: 5V–250mA
(All technical information is subject to actual performance)
Charge the Charging case
Connect the Type-C cable to the SV power adaptor, and another end to the
charging port of the Charging case.
(Kind reminder: When the white indicator light of the charging compartment
flashes, please charge the charging compartment in a timely manner.)
LED Indicator Status
Headphone LED Indicator
- ower on:alternating r<!dandhluelightsflaslling
- hutdown:Thewhitelightflashes threetimes andgoesout
- Team up with left and rlghtearpOOn1s: The r<!d light In the leftearflashes slowly, while the red light in the righte.irfloshes qlrickly
- Cormectionstatussua:essful:Theheadf)lmne indicatorlight isoff.
Case LED Indicator
- Crnlrgingthe chargingcompartment(not fullycharg<!d):Bluelightllashing
- Chorging compartment fully chorged:h lue lightolwayson
- Diocharge display:Themd lightremains onforalongtime
- Lowbatterydisplay:radlightflashing
Product operating instructions
1. Power on
Method 1: Remove from the charging compartment, the headset automatically
turns on.
Method 2: Long touch the MF button of the headphones for 3s to turn on the
headphones.
2. Power off
Method 1 : Put the headphones into the charging case directly and close the
case to tum off.
Method 2 : Long touch the MF button of the headphones for 5s to turn off the
headphones.
3.Pairing to the BT device
Step 1: Open the upper cover of the charging compartment to remove the
headphones, binaural automatic pairing;
Step 2: open the BT list of smart devices, search • HY-Yl0 • and Connect
(single ear use is supported).
Touch control button operating
Music playing mode
LefT / Right headphone operating
Hands free function
Left/ Right headphone operating ( incoming caH)
Voice Assistant
Left/ Right earphone operating
Restore factory settings
After turning on the phone without pairing state, click the headset function key 5 times to clear the pairing information and then turn off the phone.
Name and content of hazardous substances In products
This form is compiled in accordance with SJ/T 11364.
O : Indicates that the content of the hazardous substance in all homogeneous
materials of the part is in Balow the limit requirements specified in GB/T
26572.
X : Indicates that the content of the hazardous substance in at least one of
the homogeneous materials of the part exceeds The llmlt requirements specified
In GB/T 26572.
The parts marked with “X’ on the form are all harmful due to the llmltatlons
of global technological development.Substitution of substances.
Printed circuit board components*: Including printed circuit boards and their parts, electronic components, etc.,Depending on the product model, the product you purchased may not contain all the above components
Warranty Service
O.arusar.1hiswurwitycardistl19proolofyourfuturewarrantyapplication.pleasecooperate wlthlhe9ellerto fllllt outandkeepHlorMurell!!el
Authorized by Modern Integrated Commercial Holdings Co., Ltd
Authorized party: Shenzhen Modern Digital Electronics Co., Ltd
Address: 601A, Chentian R&D Building, No. 50 Baotian Road,Xixiangstreet,
Bao’an District,Shenzhen
Manufacturer: Modern Innovation (Shenzhen) Technology Development Co.,
Ltd Address: 1909, Block A, RongchuangZhihui Building, Intersection of
Longsheng Road and JinglongJianshe Road, Shangfen Community,
Minzhi Street, Longhua District, Shenzhen
FCC Statement
According to Part 15 of the FCC Rules, this device has been tested to meet the restrictions for Class B digital devices. These restraining decrees In providing reasonable protection against harmful disturbances in residential facilities. The device generates and uses radiofrequency energy,lf this instruction is not installed and used in accordance with the regulations, it may cause harmful interference to radio communications. However, there are There is no guarantee that interference will not occur in a particular installation. If this device has built for radio or television reception Into harmful interference, the device can be determined by turning it off and on when the user is encouraged to try to pass through one or Several more measures below
–Redirect or reposition the receiving antenna.
–Increase the distance between device and receiver.
–Sockets connected to devices on circuits different from the receiver are
connected.
–Please consult a dealer or experienced radio/TV technician for assistance.
This device complies with Part 15 of the FCC Rules. The operation is restricted by the following two conditions
(1) The device shall not cause harmful interference.
(2) The device must accept any received interference, including interference
that may cause unexpected operation.
Changes or modifications that are not explicitly approved by the compliance responsible party may invalidate the user’s permission to operate the device.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body