Barrette 6819 Black PVC Privacy Lattice Installation Guide

July 27, 2024
Barrette

Barrette 6819 Black PVC Privacy Lattice

INSTALLATION INSTRUCTION

INSTALLING WITHOUT MOLDINGS

To register your product, please visit barretteoutdoorliving.com.

  1. Pre-drill oversized holes through the lattice (drill the largest hole that the screw head will allow without fitting through) (Fig. 1). Center each screw in oversized holes and do not overtighten to allow for expansion and contraction of the lattice.
  2. Hang the lattice with a support every 24″ (Fig. 2). Attach sides and bottom loosely. (Do not tighten all the way). Do not use countersink screws.
  3. If using more than one panel, do not butt panels together. Leave ¼” gap to allow for expansion and contraction (Fig. 3).

IMPORTANT THINGS TO REMEMBER
If the lattice bows, loosen attaching screws, make sure you have allowed enough gap for expansion and contraction. Place fasteners 24″ apart. Do not use it for horizontal installation. Do not use countersink screws.

INSTALLING WITH CAP & DIVIDER MOLDINGS
  1. Pre-drill oversized holes through lattice and molding (drill the largest hole that the screws head will allow without fitting though) (Fig. 1). Center each screw in oversized holes and do not overtighten to allow for expansion and contraction of the lattice.
  2. Along the top, drill and fasten every 24″. Drill holes and hang through both molding and panel (Fig. 2).
  3. Along the sides and bottom, drill holes and put screws through molding only. Allow a 1/4″ gap on all sides for expansion with cap and divider moldings (Fig. 3).

IMPORTANT THINGS TO REMEMBER
If the lattice bows, loosen attaching screws, make sure you have allowed enough gap for expansion and contraction. Place fasteners 24″ apart. Do not use it for horizontal installation. Do not use countersink screws.

Warranty

Barrette Outdoor Living

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Barrette User Manuals

Related Manuals