Barrette OUTDOOR LIVING 3127927 Screw Hook & Eye Hinge Instruction Manual
- June 5, 2024
- Barrette OUTDOOR LIVING
Table of Contents
Barrette OUTDOOR LIVING 3127927 Screw Hook & Eye Hinge
WARNING:
- Improper installation of this product can result in personal injury. Always wear safety goggles when cutting, drilling and assembling the product.
- Incorrect installation may cause harm to the gate or individual.
NOTICE:
- DO NOT attempt to assemble the kit if parts are missing or damaged.
- DO NOT return the product to the store, for assistance or replacement parts call: 1-877-265-2220.
Component list
QTY | Description |
---|---|
2 | Hook/Eye Hinges |
Install Eye Hinges
a.) Position eye hinge 4″ from top and bottom of gate centered on hinge side
(Fig 1).
b.) Mark both eye hinge locations and make sure centered on hinge to ensure
proper gate operation.
c.) Drill 3/8″ pilot holes 3″ deep in both marks (Fig. 2).
d.) Twist both eye hinges in the same depth and align eye holes (Fig. 3).
Install Screw Hooks
a.) Position gate in entrance opening with shim blocks allowing for enough
ground clearance. Insert screw hooks in both eye hooks.
b.) Align gate and screw hooks to post and mark post meeting point (Fig.
4).
c.) Drill 3/8″ pilot holes 3″ deep in post (Fig. 5).
d.) Twist both screw hooks in the same depth and align hooks (Fig. 6).
Lift gate onto screw hooks (Fig. 7).
Documents / Resources
|
Barrette OUTDOOR LIVING 3127927 Screw Hook & Eye
Hinge
[pdf] Instruction Manual
3127927, Screw Hook Eye Hinge
---|---