KRX 47kHz Ultrasonic Jewelry Cleaner User Guide

Ultrasonic Cleaner
Product Manual

47kHz Ultrasonic Jewelry Cleaner

Please read this manual carefully and keep it for future reference

Standard Specifications

Scope of Application

| | |
---|---|---|---
GlassesMode| Jewelry Mode| Makeup Tools Mode| Others Mode
Glasses Mode
(The cleaning time is 120s)|
---|---
Jewelry Mode
(The cleaning time is 180s)
Rings, Necklaces, Bracelets, Earrings, etc.|
Makeup Tools Mode
(The cleaning time is 240s)
Makeup brush, Eyebrow brush, Toothbrush and other brush.|
Others Mode
(The cleaning time is 300s)
Tableware, Teacups, Whistle, Nipple, Dentures, Razors, Combs and other small items.|

Safety Instructions

Keep out of reach of children

1. Children are not allowed to use alone, unless they are under the protection of adults or professionals.
2. Cleaning and user maintenance shall not be carried out by children without protection.
3. Keep the device out of children’s reach.
4. Children must not play with packaging material.
5. Children are not allowed to play with bags in case of the potential suffocation.

Special Notice: The elderly, the disable and the inexperienced ones are not allowed to use the device alone unless they are under the instruction and protection of families and professionals.

No moisture

1. Do not use this device in the vicinity of bathtubs, showers, washbasins or other vessels containing water.
2. Don’t put the device down in such a way that it could fall into water while still connected.
3. Keep the device away from moisture, dripping water or splashing water.
4. Never touch the device with the wet hands.
5. The device, the cable and the main plug must not fall into water or other liquids.
6. If the device has fallen into water, pull out the mains plug immediately, and only then remove the device from the water. Do not use the device again until it have checked by the specialist.

DANGER of electric shock

1. Do not operate the device if it or the cable shows visible signs of damage or if the device has been damaged.
2. Only connect the main plug to a properly installed socket, which is easily accessible and supplies voltage matching the rating plate.
3. Ensure that the cable not damaged by sharp edges or hot surfaces. (cable break danger!)
4. Make sure to pull off the plug but the cable unremoved when move the device.
5. Remove the main plug from the socket after each use, when a fault occurs, when you are not using the device, before cleaning the device and during thunder or a storm.
6. Do not make any changes to the device or accessories in case of any risk.
7. Do not replace the cable by yourself. Repairs must be carried out by a specialized company only.

WARNING! Risk of material damage

1. Use the original accessories only.
2. Never place the device on hot surfaces or near heat sources or open fire. Place the device on a dry and even surface.
3. Do not place the device on a soft surface that might cover the openings.
4. Do not operate the device when the tank is empty.

Dry running is forbidden

1. When filling the tank, always ensure that the “MAX” marking is not exceeded.
2. Do notrun the device for extended time or continuously.
3. Do not use aggressive or abrasive cleaners.
4. Do not hit the device. Be careful when moving the device.
5. Do not expose the device to where temperature is below -10°C or above +40°C.

Caution!
No liability is assumed for scratched or damaged object.
Objects to be cleaned (application examples) :

1. Personal Items: Glasses, Dentures, Tooth brushes, Razor blades, etc.
2. Jewelry: Necklaces, rings, earrings, bracelets, watch chains, coins, etc.
3. Loosely framed stones, glued ornaments on decorative items as well as loose items could be detached during the cleaning process. Consult your dentist particularly in case of dentures including veneers.

The following objects are not suitable for ultrasonic cleaning:

1. Genuine pearls, Semi-precious stones, costume jewelry or soft stones such as pearls, turquoise, coral, emeralds, etc.
2. Objects that can easily be discolored, waterlogged or damaged.
3. Wooden items, leather items, fabric, materials with a fragile already damaged surface, electric devices, polycarbonate lenses (thermoplastics), glasses equipped with coated plastic lenses (even the fine damage to the surface layer may result in irreparable damage to the material)
4. Mobile phones, watches, glass frames or artworks made from tortoiseshell or abalone.

Cleaning detergent:

1. Do not use flammable or explosive detergent.
2. Special cleaning detergent should be used in case of stubborn dirt-such as grease, resinifications, rust, wax, pigments, etc., water and all-purpose cleaner are not allowed.

Introduction

The principle of ultrason Ultrasonic cleaning is based on the cavitation effect caused by the vibration of high frequency ultrasonic waves in the liquid. Microscopic bubbles are formed. These implode cause the cavitation which creates an intense scrubbing action on the surface of the item  being cleaned. The bubbles are small enough to penetrate microscopic crevices, clean them thoroughly.

Oprtaion

1. Open the lid and fill the stainless steel tank with water.
   ( WARNING: Run the device without water may damage the device! )

2. Put the objects in the water. The object should be completely immersed. Do not exceed “MAX” level.

3. Connect the power adapter to an outlet, the power indicator lights up on white.

4. Press the power button to select the cleaning mode. The indicator light turns on and starts working in a few seconds. At the same time, the power indicator is on green. When the cleaning is over, the indicator turns off and the device stops working  automatically.

5. If you press the power button during the cleaning process, the device turns into standby mode.

6. After the cleaning process is finished, pull out the power adapter and remove the objects. Finally, empty and dry the stainless steel tank.

Methods of Use

1. General cleaning:
   Use clear water for general cleaning. The object should be completely immersed. However, the water should not exceed the maximum fill level.

2. Thorough cleaning:
   In order to obtain better cleaning results, you may add a few drops of universal detergent. For professional cleaning purposes, special cleaning detergent can be used.
   Find out which concentrate is suitable for your objects to be cleaned and the type of contamination.

Care and Maintenance

DANGER! Before cleaning the device, pull out the power plug. Never immerse the device, cable or power plug in water or other liquids for cleaning and care purpose.
WARNING! Do not clean the ultrasonic cleaner with corrosive detergent or pointed object.

1. Use a piece of cloth to cleaning and dry the tank.
2. Ensure that there is no water left in the tank in order to prevent limescale.
3. Store the device in a cool and dry place.
4. Keep the device out of children’s reach.
5. Frequently Check the joint of the power plug and cord.
6. Do not hit the device. Handle with care when move the device.

[email protected]

Documents / Resources

| KRX 47kHz Ultrasonic Jewelry Cleaner [pdf] User Guide
47kHz Ultrasonic Jewelry Cleaner, 47kHz, Ultrasonic Jewelry Cleaner, Jewelry Cleaner, Cleaner
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>