SUPERATV IN-RWS-TR-OX400 Tracker Rear Windshield Instruction Manual

: June 15, 2024
: SUPERATV

Table of Contents

SUPERATV IN-RWS-TR-OX400 Tracker Rear Windshield
Product Information
Product Usage Instructions
WHAT’S INCLUDE
SAFETY INSTRUCTION
Windshield Cleaning
Liability Statement
INSTALLATION INSTRUCTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SUPERATV IN-RWS-TR-OX400 Tracker Rear Windshield

Product Information

Specifications

Model: IN-RWS-TR-OX400
Installation: Windshield

Product Usage Instructions

Installation Instructions
Before beginning the installation process, please read the instructions and view the illustrations provided.

Note: SuperATV recommends removing or securing the windshield with straps when transporting on an open-air trailer to prevent damage.

If the protective film has been removed, the item is not returnable. Before removing the film, test fit the windshield to the cage to confirm fitment. Do not discard the packaging until the product has been successfully installed.

Cleaning and Maintenance
To clean the windshield, use a mild solution of water and a
non-abrasive cleaner such as automotive glass cleaner, alcohol, or
hand washing soap. To prevent water spots, use a chamois to blot
the windshield dry.

Assembly Instructions
Warning: Use hand tools only when assembling. Do not use power tools.

Step 1: Install Windshield to Panel
Using the provided hardware, attach the windshield to the panel. Tighten the hardware securely.
Hardware: 7 each M8 x 30mm, M8 Sealing Washer, M8 Nut
Note: Ensure that the rubber faces the windshield when installing sealing washers.
Step 2: Install Seal
To ease installation, soak the seal in hot water before cutting or installing to increase flexibility. Install the seal across the top of the windshield and cut away any excess.
Step 3: Install Bracket to Panel
Attach the bracket to the panel using the provided hardware. Do not completely tighten the hardware.
Hardware: 2 each M6 x 20mm, Sealing Washer, M6 Nut
Note: Ensure that the rubber faces the windshield when installing sealing washers.
Step 4: Secure Rear Windshield to Cage
Secure the rear windshield to the cage using the provided hardware. Tighten all hardware securely.
Hardware: 8 each M8 x 30mm, M8 Sealing Washer, M8 Nut
Note: Ensure that the rubber faces the windshield when installing sealing washers.

Frequently Asked Questions (FAQ)

Can I transport my vehicle with the windshield installed?
SuperATV does not recommend keeping the windshield installed while transporting on an open-air trailer. It is advised to remove or secure the windshield with straps to prevent damage.
What should I do if I have removed the protective film?
If the protective film has been removed, the item is not returnable. Before removing the film, it is recommended to test fit the windshield to the cage to confirm fitment.
Can I discard the packaging after installation?
No, it is advised not to discard the packaging until the product has been successfully installed.
What should I use to clean the windshield?
You can clean the windshield using a mild solution of water and a non- abrasive cleaner such as automotive glass cleaner, alcohol, or hand washing soap. To prevent water spots, use a chamois to blot the windshield dry.
Can I use power tools for assembly?
No, it is recommended to use hand tools only for assembling the product. Power tools should not be used.

WHAT’S INCLUDE

SAFETY INSTRUCTION

SuperATV does not recommend keeping Windshield installed while transporting on an open air trailer. Remove or secure with straps.
This item is not returnable if the protective film has been removed.
Test fit to the cage to confirm fitment before removing film.
Do not discard packaging until product has been successfully installed.

Windshield Cleaning

Do not use Rain-X®, Plexus® or any other protector, wax, or polish.
Do not use window cleaning fluids (Windex, 409, etc) or any solvents (gasoline, denatured alcohol, acetone, etc).
Never use abrasive cleaners, abrasive pads, or gritty cloths.
Do not use a windshield wiper blade or install a motorized windshield wiper
Never use razor blades, scrapers, squeegees, brushes, etc.

Thoroughly rinse Windshield to float off dirt and mud.
Using a soft cloth, or microfiber cloth, clean Windshield with warm water and a gentle detergent. Baby shampoo, rubbing alcohol, or hand washing soap can also be used.
To prevent water spots, use a chamois to blot Windshield dry.

Liability Statement

SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact SuperATV® to verify that they will work together.
Although SuperATV® has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV® products, user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim.
SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warrantied if item was not installed properly, misused, or modified.
Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.
The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.

INSTALLATION INSTRUCTION

Use hand tools only when assembling.

Install Windshield to Panel with hardware shown. Tighten hardware.
To ease installation, soak Seal in hot water before cutting or installing to increase flexibility.
Install Bracket to Panel with hardware shown. Do not completely tighten.
Secure Rear Windshield to Cage with hardware shown. Tighten all hardware.

Need help with your installation?