Barrette 44054836 Standard 8 Inch Ornamental T-Hinge Instruction Manual

June 5, 2024
Barrette

Barrette 44054836 Standard 8 Inch Ornamental T-Hinge Instruction Manual
Barrette 44054836 Standard 8 Inch Ornamental T-Hinge

WARNING:

  • Improper installation of this product can result in personal injury. Always wear safety goggles when cutting, drilling and assembling the product.
  • Incorrect installation may cause harm to the gate or individual.

NOTICE:

  • DO NOT attempt to assemble the kit if parts are missing or damaged.
  • DO NOT return the product to the store, for assistance or replacement parts call: 1-877-265-2220.

Component list:

QTY Description
2 8″ Standard T-Hinges
10 5⁄16″ Lag Screws

Component list:

To obtain and review a copy of the warranty please visit: barretteoutdoorliving.com. You may also contact us at 1-877-265-2220 or email Cs.outdoorliving@ebarrette.com

Determine Gate Opening

Gate opening is determined by width of gate plus clearance for hinge plus clearance for latch/drop rod on a fence (Fig. 1). See latch specifications for clearance details.

  • a. The Standard 8″ Ornamental T-Hinges support gates up to 60 lbs and up to 72″ wide.
    Determine Gate Opening:

Mount Hinges on Gate

For best results, work on flat, stable surface when mounting hinges to gate.

  • a. Align the hinge with the crossing support rail on the back of the gate so the screws will engage the rail (Fig. 2).
    Mount Hinges on Gate

  • b. Mark screw locations on gate (Fig. 3).
    Mount Hinges on Gate

  • c. Drill 7/32″ pilot hole in gate (Fig. 4).
    Mount Hinges on Gate

  • d. Fasten screws provided (Fig. 5).
    Mount Hinges on Gate

Mount Gate to Post

  • a. Position gate at desired height on post. Horizontal rails on gate should be even with horizontal rails on fence (Fig. 6).
    Mount Gate to Post

  • b. Let barrel of hinge hang off post and centered in between gate and post.
    Mount Gate to Post

  • c. Mark screw locations on post (Fig. 7).
    Mount Gate to Post

  • d. Drill 7/32″ pilot holes on post (Fig. 8).
    Mount Gate to Post

  • e. Fasten screws provided to post (Fig. 9).
    Mount Gate to Post

NOTE: Standard 8″ Ornamental T-Hinges are NOT self-closing. If self- closing hinges are needed, a separate purchase of a Boerboel Gate Spring is required.

Barrette Outdoor Living
545 Tilton Rd, Egg Harbor City, NJ. 08215
barretteoutdoorliving.com877-265-2220

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Barrette User Manuals

Related Manuals