SANELA SLU 01N Washbasin Tap Instructions
- June 13, 2024
- SANELA
Table of Contents
SANELA SLU 01N Washbasin Tap
Instructions for use
Function
Properties
STANDARD ◄► START / STOP
START / STOP
Mounting instructions
Supplied equipment
Installation
- It is necessary, for the proper function, to keep the unit under constant voltage (don´t connect the power supply unit behind the switch into the light circuit)!
Recommended accessories
- SLZ 01Y external power supply 24V DC for operating of max 5 pc. of washbasin taps
- SLZ 01Z external power supply 24V DC for operating of max 9 pc. of washbasin taps
- SLZ 04Y external power supply 24V DC on DIN rail, for operating of max. 5 pcs. of washbasin taps
- SLZ 04Z external power supply 24V DC on DIN rail, for operating of max. 9 pcs. of washbasin taps
- SLZ 04X external power supply 24V DC on DIN rail, for operating of max. 15 pcs. of washbasin taps
- SLZ 06 external power supply 24V DC for operating of max. 1 pc. of washbasin tap
- SLT 04 thermostatic mixing valve 3/4″ (28l/min)
- SLT 05 thermostatic mixing valve 1/2” (42l/min)
- SLD 03 universal remote control for setting of infra-red sensors
- SLA 55A economical aerator 3,8 l/min
- SLA 55B economical aerator 1,9 l/min
More information
It is recommend to check up the sifter of electromagnetic valve once a year, because of there is a possibility that valve could be fouled up. Checking of tightening of screw conections and connectors contact surfaces is also recommend once a year. It is necessary to proceed according to the law about packaging material after unpacking of the product. Producer assures that this product has declaration of conforminty in accordance with the regulation 73/23/EHS and 92/31/EHS.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>