Avail NRCS004 25mm Grab Rail And Adjustable Shower Rail Set Instruction Manual

July 23, 2024
Avail

Avail NRCS004 25mm Grab Rail And Adjustable Shower Rail Set

Avail NRCS004 25mm Grab Rail And Adjustable Shower Rail
Set

CALIBRE SHOWER RAIL

STOCK CODES

25mm Ergo 900 Rail & Shower Set – NRCS004

This full set includes:

  • Adjustable 7.5 litres per minute shower head with multiple settings including soft, pulsating and bubble spray, WELS 4 Star Rating (Reg# Sll0Ol)
  • Simple push button or twist adjustment for shower head height
  • 7.5m Flexi Stainless Steel Shower Hose
  • Wall water outlet with additional shower head holder, mounting brackets and wall screws included.
  • The rails can be shortened during installation to suit you
  • 750 kg capacity for all 25mm calibre grab rails
  • Ergo 25mm diameter rails are more slimline and suitable for smaller hands, in non-ODA bathrooms
  • Additional options in c lude: Soap Basket, Im or 2m Flexi Shower Hose, Shower Head Wall Bracket
    Avail NRCS004 25mm Grab Rail And Adjustable Shower Rail
Set

FRONT

BRACKET SIDE

Calibre Shower Rail

WALL BRACKET

Calibre Shower Rail

Calibre 25mm Ergo Rail

INSTALLATION INSTRUCTIONS

Installation Instructions| l. Locate wall studs, install into at least one stud.
Place wall seal/mounting bracket on wall at correct height over centre of stud and mark hole positions on wall .
---|---
Installation Instructions| 2. Drill pilot holes into wall stud approximately 60mm deep to suit mounting screws (and wall plugs if required) .
Tip:4mm hole for screws into timber or 10mm hole for wall plugs.
Installation Instructions| 3. Apply small amount of silicon to mounting bracket and wall in and around the screw holes.
| 4. Install mounting brackets by screwing onto wall.
Tip: Use appropriate mounting screws for the wall stud material , supplied screws are for timber wall studs.
Installation Instructions| 5. Slide rail tube into end bracket and push onto wall brackets.
Tip: Rail length can be cut down to a smaller size, simply use an angle grinder, hacksaw or pipe cutter then deburr the end with a file or grinder and reinsert into the end bracket.
Installation Instructions| 6. Tighten grub screws with Allen key.
Tip: If rail rattles, loosen end bracket, twist slightly and tighten .

WARNING

These rails are designed to be mounted onto wall studs or masonry walls. Installation is recommended to be completed by qualified trades person who complies with the AS 1428.1- 2009 design for access and mobility standard.
It is recommended rail location is determined by a qualified occupational therapist or trained professional to the AS 1428.7-2009 standard. Correct installation is required to ensure safe, long term operation. Incorrect mounting can result in reduced capacity of the rail which can result in injury to user and damage to the wall.

Customer Support

WWW.AVAIL.DESIGN
INFO@AVAIL.DESIGN
7300 945 720

Documents / Resources

| Avail NRCS004 25mm Grab Rail And Adjustable Shower Rail Set [pdf] Instruction Manual
NERO, ERGO, NRCS004 25mm Grab Rail And Adjustable Shower Rail Set, NRCS004, 25mm Grab Rail And Adjustable Shower Rail Set, Rail And Adjustable Shower Rail Set, Adjustable Shower Rail Set, Shower Rail Set, Rail Set
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals