Avail NRCR3286T 30mm Horizontal Grab Rails Instruction Manual
- July 23, 2024
- Avail
Table of Contents
Avail Adjustable Toilet Poll Holder
For all 32mm Horizontal Grab Rails
NRCR3286T
AVAIL QUALITY DESIGNS
- This adjustable toilet roll holder can be added onto any modular 32mm grab rail including the full Calibre Mod range
- The direction can be changed from left to right during installation
- High quality stainless steel available in a wide range of stylish finishes including Chrome, Matt Black, Gunmetal, Brushed Brass and Gold
- Custom finishes are available on request
- Grub screw secures holder onto the rail
ADJUSTABLE TOILET ROLL HOLDER INSTALLATION INSTRUCTIONS
- Slide the 32mm diameter ring onto the grab rail before installing the grab rail
- Using an allen key, tighten the m4x4mm grub screw onto the rail until the ring no longer slips
- Attach the toilet roll holder onto the ring with the screw with an allen key
CONTENTS:
1 x 32mm Ring
1 x Toilet Roll Holder
1x 85mm Screw
1 x Grub Screw
N Step 1 & 2
N Tighten screws with Allen key
N Step 3
WARNING:
Installation is recommended to be completed by qualified tradesperson who
complies with the AS 1428.1-2009 Design for Access and Mobility standard.
It is recommended rail location is determined by a qualified Occupational
Therapist or trained professional to the AS 1428.1-2009 standard. Correct
installation is required to ensure safe, long term operation. Incorrect
mounting can result in reduced capacity of the rail which can result in injury
to user and damage to the wall.
WWW.AVAIL.DESIGN INFO©AVAILDESIGN 1300 945 720
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>