Tefal IXEO+ QT15XX Garment Steamer Instruction Manual

**Tefal IXEO+ QT15XX Garment Steamer Instruction Manual

**

Important Safety recommendations

Safety instructions and guidelines

• Read the instruction manual carefully before using your appliance for the first time. This product is designed for domestic and indoor use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.

• The appliance must not be left unattended while it is connected to the supply mains.

• Do not unplug your appliance by pulling on the power cord. Always unplug your appliance:

  • before filling the water tank or rinsing the boiler
  • before cleaning the appliance,
  • after each use.

•  Never fill the appliance directly from the tap.

• The appliance does not work without the scale collector(depending on the model).

• The appliance must be used and rested on a flat, stable and heat-resistant surface.

• When you place the iron on its stand or on a separated base, ensure that the surface on which the stand or the separated base is placed is stable.

• Do not place the separated base on the ironing board cover or on a soft surface.
  This appliance is not intended for use by individuals  including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision by a person responsible for their safety.

• Children must be supervised to ensure that they do not play with the appliance.

• This appliance may be used by children aged 8 years and older and by individuals lacking experience or knowledge or with reduced physical, sensory or mental capabilities, provided that they have been thoroughly instructed regarding the use of the appliance, are supervised, and understand the risks involved.

• Children must not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• Keep the appliance and its power cord out of reach of children under 8 years of age when it is in use or cooling down.

• The surfaces of your appliance can reach very high temperatures when functioning, which may cause burns.
  Do not touch the hot surfaces of the appliance (accessible metal parts and plastic parts adjacent to the metallic parts).

• It is very important not to use descaling products (vinegar, industrial descales, etc.) to rinse the boiler, as they may damage it.(depending on model)

• Before emptying the boiler/rinsing the collector, always wait until the appliance has cooled down and has been unplugged for over 2 hours before loosening the drainage/collector cap.

• Caution: If the cap or drainage cap is damaged, have it replaced by an approved service center.

• The filling or decalcifying or rinsing or inspection apertures that are under pressure, must not be opened during use.

• Do not use other decalcifying products than the one cited in the Instruction for use

• Care should be taken when using the appliance due to emission of steam

• Unplug the appliance during cleaning & filling

• The appliance must not be used if it has been dropped if it appears to be damaged, if it is leaking or is not working correctly.

• Do not attempt to dismantle your appliance: take it to an approved service center to avoid any danger.

• If the power cord or steam cord of your appliance is damaged, it must be replaced by an approved service centre in order to avoid any danger.

• Before storing the appliance, once it is unplugged, please wait until it has cooled down completely (around 1 hour).

• All accessories, consumables and removable parts must be bought only from an approved service centre.

• For your safety, this appliance conforms to all applicable regulations (Low Voltage, Electromagnetic Compatibility and Environment Directives, etc.).

• Your appliance is an electrical appliance: it must be used under normal conditions of use.

• It is equipped with 2 safety systems(depending on model):

  • a valve to prevent the build-up of pressure, which allows excess steam to escape in the event of the appliance malfunctioning,
  • a thermal fuse to prevent overheating.

• Always plug your appliance:

  • into a mains circuit with voltage between 220 V and 240 V (Alternating current only),
  • into a socket outlet with an earth connection.
    Faulty connection can cause irreparable damage to the appliance and will invalidate your guarantee.

• If you are using an extension cord, ensure that it is correctly rated (16A) with an earth connection and is fully extended.

• Fully unwind the power cord before plugging it into an earthed plug socket.

• Never touch the power cord or steam cord with the soleplate of the appliance. Do not leave the power cord or steam cords close to or in contact with sources of heat or sharp edges.

• The water in the appliance may still be hot and cause burns even after 2 hours of cooling down. Handle the appliance with care when the cap/collector is removed, particularly when you are emptying it.

• Your appliance emits steam that may cause burns.

  • Handle the iron with care, particularly when using the vertical steam function.
  • Never steam clothing when it is worn by a person, always steam it on a hanger.
  • Never iron in a seated position with your legs below the ironing board.
  • Never direct the steam towards people or animals.

• The first time the appliance is used, there may be some reject of particles, fumes and smell but this is not harmful.

• Never immerse your appliance in water or any other liquid. Never place it under tap water.

• Careful during the assembly of the product & the board to pinch risks(depending on model)

• Never place the flat iron on the ironing board, always use the iron rest. Similarly, never place the separated base on the ironing board(depending on model)
  

Important notice for appliances ≥ 2200W only :

Under unfavorable mains conditions, phenomena like transient voltage drops or lighting fluctuations can happen. Therefore, it is recommended that the iron is connected to a power supply system with a maximum impedance of 0,29 Ω. If necessary, the user can ask the public power supply company for the system impedance at the interface point.

What water should I use?

• This appliance has been designed to be used with untreated tap water. If your water is very hard, (hardness above 30°F, or 17°dH or 21°e) use a mixture of 50% tap water and 50% distilled water. In some seaside regions, salt content might be high.
  In that case, use only water bottle, with low mineral level.

• They are different type of softened water, and most of them can be used in your appliance. However, some of them, especially the one with chemical components, like salt, might occur white or brown runs. If you face this type of issue, we recommend you to use non-treated tap water or bottled water.

• You should not use water from domestic appliances, with additives (starch, perfume, etc.) , rain water, boiled, filtered, bottled water. Do not use pure distilled nor pure demineralized water. Such water might affect steam attributes and at high temperature generate steam chamber sediment, liable to stain your linen and cause early appliance aging.
  SAVE THESE INSTRUCTIONS

Help protect the environment!

• Your appliance contains a number of recoverable or recyclable materials.
• Take these to a collection centre, or to an approved service centre for processing.

Troubleshooting problems with your appliance

the tubes because you are using the steamer for the first time or have not used it for a while.| Press the steam button away from your ironing board until the iron emits steam.
The soleplate is not hot enough to pro-duce steam.| Set the appliance to the steam zone (see user manual).
Traces of water appear on the laundry| Your ironing board cover is saturated with water as it is not suitable for the power of your appliance.| Ensure you use a suitable ironing board (a mesh ironing board which prevents condensation).
White streaks are dripping from the holes in the soleplate| Your boiler is emitting lime scale as it is not rinsed regularly.| Rinse the boiler as instructed in the user manual.
Brown streaks are dripping from the holes in the soleplate and staining the laundry| You are using chemical descaling agents or additives in the water.| Never add any product to the boiler (see the section “What water should I use?”)
The soleplate is dirty or brown and may mark the laundry| The appliance is being used on too high a temperature.| Clean the soleplate as instructed in the user manual. Use a lower temperature.
The soleplate is scratched or damaged| You have placed your iron flat down on the metal iron rest.| Always place your iron on its heel or on the iron rest.
The red “WATER” indicator light is flashing| You have not filled the water tank.| Fill in the water tank and press the “OK” button located on the control panel until the indicator light goes off.
You have not pressed the “OK” button.| Press the “OK” button located on the control panel until the indicator light goes off.
The “anti-scale” indicator light is flashing| You have not pressed the “OK” button.| Press the “OK” button located on the control panel until the indicator light goes off.
The appliance will not turn on or the iron indicator light and the “ON-OFF” indicator light will not turn on.| The “auto-off” system is activated after non-use and has turned off your appliance.| Press the “ON-OFF” restart button located on the control panel.
The red “WATER” indicator light is flashing and the “ON- OFF” button is not working.*| The appliance has been stored in a cold area (around

<10C°)

| Unplug the appliance. Leave the appliance for 3 hours until it reaches ambient temperature.
A loud noise from the appliance.| Not enough water in the tank.| Fill the tank.

Depending on the model

Product presentation

1. Hanger hook
2. Tilting board
3. Removable & lockable iron rest
4. Iron
5. Steam hose
6. Height lockers
7. Adjustable poles
8. On/Off button
9. Steam unit
10. Wheels
11. Water tank
12. Iron soleplate
13. Steam trigger
14. Water tank inlet
15. Fabric brush

Before first use

On first use, fumes and odour may come from the appliance. They do not affect the use of the appliance and disappear quickly. Small particles may also come from the iron. These are part of the production process and do not affect yourself or your garments. They disappear quickly. The appliance must be used and placed on a flat, stable, heat resistant surface. When you place the appliance on its stand, ensure that the surface on which the stand is placed is stable. Never use the appliance if it is reversed.

Never use the appliance board with a classic iron or a steam generator. Only use your appliance iron.

First use

Incline the board

Put the hands on each side of the board, raise it vertically , and tilt it back until you find your desired position.

Put the hands on each side of the board, raise it vertically , and tilt it back until you find your desired position.

Adjust the board and the iron rest height

When the height of the board or of the iron rest needs to be adjusted, unlock the height adjusters. Raise or lower the board/iron rest until the desired position. Lock the pole lockers.

When unlocking the poles, the board may go down. Hold it during manipulations.

Product use

Unplug the appliance. Open the water tank inlet. Fill it, and close the inlet.

Put the iron on the iron rest. Plug the appliance and switch it on.
Wait until the light stops flashing.

Remove the iron rest from its rest, and press the trigger until steam comes out. The steam flow will stop a few seconds after releasing the trigger. At first use, steam might take more time than usual to come out.

Never iron or steam directly on a garment being worn by someone

Steam boost

Press the steam trigger three times to activate the steam boost.

Auto-off

After 8 minutes of inactivity, the steam unit will switch off automatically.

Accessories

Use the hanger hook to iron a garment placed on a hanger

Fabric brush

Before you remove or attach the brush, switch off the appliance and
allow it to cool down for 1 hour. Put the steam brush on the iron soleplate. This accessory helps to open the garment fibers for better steam penetration.

Removable base

Remove the steam unit off its base. Unlock this iron rest by pushing on the inside plastic strip. Remove the iron rest with the iron.

Position the iron and its iron rest on the steam unit.

Move around with your appliance. Plug in, switch it on, and wait until it heats up. Always use when steam unit is on the ground, stable.

Always reposition the iron in its iron rest when not in use, never put the hot EN soleplate directly on the steam unit.

Horizontal orientation

Unlock this iron rest by pushing on the inside plastic strip. Remove the iron rest with the iron.

Place the table in the horizontal orientation and position the iron and its iron rest on the hanger hook.

Product cleaning

Switch off the appliance. Wait 1 hour to allow it to cool down completely.

Clean the soleplate with a damp soft cloth or sponge.

Clean the soleplate with a damp soft cloth or sponge.

Product tidying

Switch off the appliance. Wait 1 hour to allow it to cool down completely.
 

Empty the water tank.

Tip up the board to the vertical position, store the cords.

Lean the all appliance backwards in order to move & store it away

References

• Tefal™ Australia | Cookware, Kitchenware, Recipes & More

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>