Avail R01T30-CH Diameter Rail with Towel Holder Instruction Manual

June 13, 2024
Avail

Avail R01T30-CH Diameter Rail with Towel Holder

STOCK CODES

  • 32mm Mod 300mm – NRCR3212B
  • 32mm Mod 600mm – NRCR3224B
  • 32mm Mod 900mm – NRCR3230B

DIMENSION

AVAIL QUALITY DESIGNS

  • Australian Owned and Designed
  • Sizes : 300 – 1200mm Lengths as standard, longer available by request
  • Available in over 7 finishes including Living Brass, Chrome, Matt Black,
  • Gunmetal, Brushed Nickel, Bronze, Cold
  • Modular design, the rail to be mounted horizontally, vertically or at any angle and cut down to suit your bathroom’s 150 kg capacity for all 25mm and 32mm diameter calibre grab rails
  • Mod 32mm diameter rails are approved for standard AS1428.1 requirements in DDA bathrooms
  • Ergo 25mm diameter rails are suitable for heavy-duty towel rails and smaller hands, in non-DDA bathrooms

Installation Instruction

  1. Locate wall studs, and install them into at least one stud. Place wall seal/mounting bracket on wall at correct height over the centre of the stud and mark hole positions on wall (minimum 2 supplied screws per bracket).

  2. Drill pilot holes into wall stud approximately 60mm deep to suit mounting screws (and wall plugs if required).
    Tip :3mm hole for screws into timber or 8mm hole for wall plugs.

  3. Apply a small amount of silicon to the mounting bracket and wall in and around the screw holes.

  4. Install mounting brackets by screwing onto the wall. supplied screws ire for timber wallets for the Wall stud material,

  5. Slide rail tube into end bracket and push onto wall brackets.
    Tip : Rail length can be cut down to a smaller size, simply use an or glistened heckler into the end race debut the end with a file

  6. Tighten grub screws with allen key.
    Tip : If the rail rattles, loosen the end bracket, twist slightly and tighten. rest Maid lane whilst ding the gail ala right (according to the left picture).

  7. Using supplied Allan key whilst holding the rail in place, screw the M490mm and M445mm into the grab rail till tight (according to left picture).

  8. Finished.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Avail User Manuals

Related Manuals