Wi-Tek WI-POE21E-O, WI-POE22E-O Waterproof Industrial PoE Extender Installation Guide

: July 23, 2024
: Wi-Tek

Table of Contents

Wi-Tek WI-POE21E-O, WI-POE22E-O Waterproof Industrial PoE Extender
Specifications
Product Usage Instructions
4. Hardware Installation:

Wi-Tek WI-POE21E-O, WI-POE22E-O Waterproof Industrial PoE Extender

Specifications

Product Name: Waterproof Industrial PoE Extender
Model: WI-POE21E-O | WI-POE22E-O
Power Output: PoE 60W In, 30W Out
Connectivity: Gigabit Ethernet
IP Rating: IP67

Product Usage Instructions

The PoE Industrial Waterproof Gigabit 802.3bt PoE++ Splitter is designed to extend Power over Ethernet (PoE) capabilities in industrial settings.

The device features PoE In, Data Out ports, and a power LED indicator. It is compact and suitable for use with IP cameras and industrial PoE switches.

Step 1: Disassemble the waterproof gland by unscrewing the clamping nut.
Step 2: Turn the body of the waterproof gland towards the RJ45 ports and tighten it using the wrench.
Step 3: Plug the cable into the port.
Step 4: Insert the sealing insert into the waterproof gland body.
Step 5: Attach the clamping nut to the waterproof gland to complete assembly.
Step 6: Check and ensure a tight installation. Repeat Steps 1 to 5 for other ports if needed.

4. Hardware Installation:

The device supports PoE+ and PoE++ standards, making it suitable
for various devices like Wireless APs and PTZ cameras. Connect the
device following the installation steps provided above.

FAQ

Q: What is the IP rating of the Waterproof Industrial PoE Extender?
A: The IP rating of the device is IP67, indicating it is dust-tight and can withstand immersion in water up to a certain depth.
Q: What are the supported PoE standards for this extender?
A: The extender supports 802.3af/at (up to 30W) and 802.3bt (up to 60W) PoE standards, allowing for compatibility with various PoE devices.

Package Contents

Hardware Introduction

Product Outlook

Appearance Overview

WI-POE21E-O

LED	Color	Status	Description
LAN	Green	On	Link established
Off	No device connection
Blink	Data and power are transmitting

WI-POE22E-O

LED	Color	Status	Description
LAN	Green	On	Link established
Off	No device connection
Blink	Data and power are transmitting

Accessories Installation

Step 1: Disassemble the waterproof gland
Step 2: Turn the body of the waterproof gland to the RJ45 ports and tighten it with the wrench. Pick a cable and run through the sealing insert and clamping nut.
Step 3: Plug the cable into the port.
Step 4: Insert the sealing insert into the waterproof gland body.
Step 5: Attach the clamping nut to the waterproof gland to complete assembly.
Step 6: Check it and make sure it is tightly installed.
Step 7: Repeat Step 1 to Step 6 for other ports.

Hardware Installation

Warranty Card

If the product is defective within three months after purchase, we will provide you with a new product of the same model.
If the product defects within the three-year warranty period, we will provide professional maintenance service.
Proof of purchase and a complete product serial number are required to receive any services guaranteed as part of the limited warranty.
Any other defects that are not caused by workmanship or product quality, such as natural disasters, water damage, extreme thermal or environmental conditions, sticker damage, or warranty card loss will disqualify the product from a limited warranty.