LINDY 43363 300m 2 Port Fibre Optic USB 3.0 Extender User Manual

: July 22, 2024
: LINDY

Table of Contents

LINDY 43363 300m 2 Port Fibre Optic USB 3.0 Extender
FAQ
Safety Instructions
Instructions for Use of Power Supply
Introduction
Features
Specification
Installation
Recycling Information
CE/FCC Statement
CONTACTS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LINDY 43363 300m 2 Port Fibre Optic USB 3.0 Extender

LINDY-43363-300m-2-Port-Fibre-Optic-USB-3-0-Extender-
PRODUCT

FAQ

Q: Can I use any type of fibre optic cable with the extender?
- A: No, the extender requires a Multimode fibre optic cable with LC Duplex connectors for proper functionality.
Q: Do I need to install any drivers for this extender to work?
- A: No, this extender is true plug and play and does not require any drivers for operation.
Q: What is the warranty period for this product?
- A: The product comes with a LINDY 2-year warranty and free lifetime technical support.

Safety Instructions

WARNING

Please read the following safety information carefully and always keep this document with the product.

DANGER ELECTRIC SHOCK RISK: Failure to follow these precautions can result in serious injuries or death from electric shock, fire or damage to the product.

Touching the internal components or a damaged cable may cause electric shock, which may result in death.

This device is a switching type power supply and can work with supply voltages in the range 100 – 240 VAC For worldwide usability four different AC adapters are enclosed: Euro type, UK type, US/Japan type and Australia/New Zealand type. Use the appropriate AC adapter as shown in the picture and ensure it is firmly secured in place and does not detach by pulling before installing into a power socket.

To reduce risk of fire, electric shocks or damage:

Do not open the product nor its power supply. There are no user-serviceable parts inside.
Only qualified servicing personnel may carry out any repairs or maintenance.
Never use damaged cables.
Do not expose the product to water or places of moisture.
Do not use this product outdoors it is intended for indoor use only.
Do not place the product near direct heat sources. Always place it in a well-ventilated place.
Do not place heavy items on the product or the cables.
Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket

Instructions for Use of Power Supply

To connect the adapter

LINDY-43363-300m-2-Port-Fibre-Optic-USB-3-0-Extender-
FIG-1

Slide the desired plug adapter into the power supply until it locks into place.

To remove the adapter

LINDY-43363-300m-2-Port-Fibre-Optic-USB-3-0-Extender-
FIG-2

Press both sides of the latch as indicated below
- While pressed, slide the plug adapter for the power supply.

Introduction

Thank you for purchasing the 300m 2 Port Fibre Optic USB 3.0 Extender. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.

The Lindy 300m 2 Port Fibre Optic USB 3.0 Extender supports SuperSpeed transfer rates of up to 5Gbps.
This Extender is a complete, two-part hardware solution comprising of a transmitter that connects directly to the user’s computer and a receiver that connects to two USB peripherals (Type A and Type C), using “off the shelf” LC duplex fibre cabling (not included).

Package Contents

1 x Transmitter
1 x Receiver
1 x Multi-Country PSU DC 5V 3A (EU/UK/US/AUS)
Lindy Manual

Features

Extends USB connections up to maximum of 300m using a Multimode fibre optic cable (not included):
- Max. 69m (226.38ft) – 1 x Multimode 62.5μm/125μm OM1
- Max. 138m (452.75ft) – 1 x Multimode 50μm/125μm OM2
- Max. 300m (984.24ft) – 1 x Multimode 50μm/125μm OM3
USB 3.2 / 3.1 Gen 1 / USB 3.0 standard up to 5Gbps, backwards compatible with USB 2.0 devices
Please note that some USB 2.0 cameras use a different timing standard and thus may be incompatible.
Link and Power LEDs on transmitter and receiver unit (solid blue for Link/Power)
Housing material: Metal
True plug and play, no drivers required
Supports all major USB operating systems

Specification

Transmitter Interfaces: Input: USB Micro-B (Female), Output: Duplex LC (Female)
Receiver Interfaces: Input: Duplex LC (Female), Receiver Output: 1x USB Type A (Female), 1x USB Type C (Female)
Power: 5.5/2.1mm DC socket
Operating Temperature: 0°C to 50°C (32°F – 122°F)
Storage Temperature: -20°C to 70°C (-4°F – 158°F)
Humidity: 20 – 80% (non-condensing)
Dimension of each housing (WxLxH): 57x93x28mm (2.24×3.66×1.1in)
Weight: Transmitter: 0.125kg (0.28lb), Receiver: 0.129kg (0.28lb)
Power requirements: 5VDC 3A

Installation

Connect Transmitter and Receiver using a multimode fibre optic cable (not included) with cross-over LC Duplex. Then connect your USB 3.0 or USB 2.0 devices to the USB Type A and Type C female ports of the Receiver and the power supply with the Receiver. Finally connect the Transmitter to your host computer using a USB 3.2/3.1 Gen 1/USB 3.0 Type Micro-B male to Type A or C male cable (USB cables not included).

Lindy regularly checks and tests our product range to ensure maximum compatibility and performance.
For the most up to date version of this manual, please refer to your local Lindy website, search for the relevant part number and find the manual under Downloads.

Recycling Information

WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products

Europe, United Kingdom

In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.

CE/FCC Statement

CE Certification

LINDY declares that this equipment complies with relevant European CE requirements.

UKCA Certification

LINDY declares that this equipment complies with relevant UKCA requirements.

FCC Certification

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the international Standard IEC 60950-1 or 60065 or 62368-1.

LINDY manufacturer’s guarantee – note for customers in Germany

LINDY grants a two-year warranty for this product beyond the legal regulations in Germany
Manufacturer’s warranty from the date of purchase. The detailed conditions of this guarantee can be found on the LINDY Website listed under the terms and conditions.