NEEWER Z880 TTL Li-ion Flash Camera Instruction Manual
- July 27, 2024
- NEEWER
Table of Contents
NEEWER Z880 TTL Li-ion Flash Camera
Product Information
Specifications:
- Power Output: -2dBm
- Regulatory Compliance: FCC, IC
Product Usage Instructions
1. Power Output:
The product has a power output of -2dBm. Ensure that this level is suitable for your intended use and complies with local regulations.
2. Regulatory Compliance:
This product complies with FCC regulations and IC warning statements. Make sure to adhere to all regulatory requirements while using the product.
FAQs
- Q: What does -2dBm power output mean?
- A: -2dBm refers to the power level of the product, indicating the signal strength it emits. It is important to understand this value to ensure proper usage.
- Q: What are FCC and IC warning statements?
- A: FCC (Federal Communications Commission) and IC (Industry Canada) warning statements are regulatory requirements that certify the product’s compliance with communication standards and safety guidelines.
-2dBm
-2dBm
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. CAUTION: The user
is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: –Reorient or relocate
the receiving antenna. –Increase the separation between the equipment and
receiver. –Connect the equipment into an outlet on a circuit different from
that to
which the receiver is connected. –Consult the dealer or an experienced
radio/TV technician for help. FCC RF Radiation Exposure Statement: 1. This
Transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. 2. This equipment complies with RF radiation exposure
limits set forth for an uncontrolled environment. The device has been
evaluated to meet general RF exposure requirement. This equipment should be
installed and operated with minimum distance 0mm between the radiator & your
body.
IC Warning Statements
– English Warning Statement This device contains licence-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions: (1) This device may not cause interference. (2) This
device must accept any interference, including interference that may cause
undesired operation of the device. The digital apparatus complies with
Canadian CAN ICES-3 (B)/NMB-3(B). This radio transmitter has been approved by
Industry Canada to operate with the antenna types listed with the maximum
permissible gain indicated. Antenna types not included in this list, having a
gain greater than the maximum gain indicated for that type, are strictly
prohibited for use with this device. The device has been evaluated to meet
general RF exposure requirement. This equipment should be installed and
operated with minimum distance 0mm between the radiator & your body. – French
Warning Statement Cet appareil contient des émetteurs/récepteurs exempts de
licence qui sont conformes aux RSS exemptés de licence d’Innovation, Sciences
et Développement économique Canada. L’exploitation est soumise aux deux
conditions suivantes : (1) Cet appareil ne doit pas provoquer d’interférences.
(2) Cet appareil doit accepter toute interférence, y compris les interférences
susceptibles de provoquer un fonctionnement indésirable de l’appareil.
l’appareil numérique du ciem conforme canadien peut – 3 (b) / nmb – 3 (b). Le
présent émetteur radio a été approuvé par Industrie Canada pour fonctionner
avec les types d’antenne énumérés ci-dessous et ayant un gain admissible
maximal. Les types d’antenne non inclus dans cette liste, et dont le gain est
supérieur au gain maximal indiqué, sont strictement interdits pour
l’exploitation de l’émetteur. L’appareil a été évalué pour répondre aux
exigences générales d’exposition aux RF.Cet équipement doit être installé et
utilisé avec une distance minimale de 0 mm entre le radiateur et votre corps.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>