CREE LIGHTING CMACC-INPLG-WH Smart Plug Instructions

US 15A Smart Plug instruction
SMART PLUG
INSTRUCTION

Intended use：

The product is a Smart plug， the output socket voltage is consistent with the input voltage, and Max. output load is 1800W or 15A under using of resistive load conditions, the Smart plug like a switch that can be operated remote control, the countdown on/off and turn on / off device function regularly; It can also measure electrical parameters of current, voltage, power and daily power usage.

Key parameters：

【Product Name】 ： Indoor Smart plug
【Model】：CMACC-INPLG-WH
【 input 】： AC 120V ± 10%， 60HZ， Max
load :15A (resistive);
【output】：AC 120V±10%，60HZ，MAX 1800W@120V
【 Wireless Standard 】： Wifi 2.4Ghz IEEE
802.11 b/g/n;
【Static power】: ＜0.7W

【Laser】: As below for reference, different customers will have different content

Indoor use only
Complies with Part 15 of the FCC Rules Complies with ICES 003 and RSS-247 Issue 2
IC Conforms to UL STD 60730-1, 61010-1, 61010-2-030, 498,
Certified to CSA STD C22.2 No. 61010-1, 61010-2-030, 60730-1, C22.2 #42.
Do Not Place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local regulations.

【 Working Temperatura / humidity 】 ：0~+40℃;20%~85%
【Working altitude 】:2000m
【POLLUTION DEGREE】：2
【Storage Temperatura / humidity】：-20℃ ~+70℃;0%~90%
【Outline】：69.237.433.0mm;
【Protection】:IP20, 750℃ High-temperature flame retardant material

Specifications:

【protect shutters】：Include protect shutters【Indication】: RED and Blue LED Indication
【OTA】: Support
【wireless Access】: Support SmartConfig and AP network configuration;
【Function】:On/off switch, Remote on-off control, the countdown on/off, Turn on / off device function regularly, electrity meter (current, voltage, power, daily power usage)

Warning and Announcements

(Avertissement et Précautions à prendre):

1. Only to be used indoor.

2. Only to be used in dry conditions.

3. Only to be used within max. load.

4. Do not connect in series. if the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.

5. Only connect to outlet with reliable earth.

6. Do not connect after each other.

7. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and EconomicDevelopment Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
   1. This device may not cause interference.
   2. This device must accept any interference, including interference that may cause undesired operation of the device.

8. This equipment complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users.

9. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
   (1) this device may not cause harmful interference,
   (2) this device must accept any interference received, including interference that may cause undesired operation.

10. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
    NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
    However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.
    This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

11. When the apparatus needs cleaning, you can blow off the dust from the apparatus with a blower or clean it with a rag, etc. Don’t use solvents such as benzol, alcohol, or other flu ids with very strong volatility and flammability for cleaning the apparatus body. Clean only with dry cloth.

12. Maintenance and service
    Please do not continue to use the product if there is any problem and send it back to us

Installation：

a.Portable, installation-free,do not install the product at the difficult to operate disconnecting device position
b.when you installed plug on the wall socket, plug Switch button should be in the left, the wall sockets shall be 120V±10% and well-grounded

APP Installation

Use your phone to scan the QR code below or search “Smart Life” in the application market to download and install the App
https://smartapp.tuya.com/smartlife

Register/Login/Forgot password Register:

If you don’t have an App account, register an account or sign in with a verification code by SMS, the registration process as follows:
a.Open APP enter the main interface, tap the ‘sign up’, agree on the Notice

b. The system automatically recognizes your country/area; you can also select your country code. Enter the mobile number or E-mail address to ‘get verification code’, If you enter the mobile number, you will get the verification code in your phone verification message, If you enter the E-mail， you will get the verification code in your Email content， tap “Confirm” to finish your registration.

Sign in with your existing username and password:

a.Back to log In’interface, the system automatically recognizes your country/area. You can also select your country code. Enter the mobile number/E-mail,
b. Enter your registered mobile number or Email, and password to login.

Sign in with social media account:

If you have installed Facebook or Twitter User in your smartphone, tap the corresponding icons and then sign in the App aver social network authentication

Forgot password:

To find your password back, please follow the procedures:
a.Tap“Forgot password”，
b. The system automatically recognizes your country/area. You can also select your country code by yourself. Enter the mobile number/E-mail and tap “Next”,
c.Enter the verification code in the message/E-mail, and enter the new password， tap” Confirm” to finish.

The user add the device to the network

a.Enter the ‘my home’ page and tap the top left corner icon to display the ‘personal information’, you can fill out or  modify the relevant information

b.Ensure the mobile device is in the normal Wifi connection state and the signal is good, click the icon “add device” to enter the ‘Add Manually’ interface, select the corresponding Wifi plug type, meanwhile,you can open your phone Bluetooth to quickly add a device. C．Ensure the mobile device is in the normal Wifi connection state and the wifi signal is good,Just support the 2.4GHz wifi model.
Click the icon “add device” to enter the ‘Add Manually’ interface, select the corresponding wifi plug type, also you can open your phone Bluetooth to quickly add a device.

Ensure the device is switched on, observe whether plug status Red LED is flashing, if not, you must push the power button more than 5 seconds until the led change into flashing that represents into network matching ready status.,click the next icon, automatically complete finding device-> register on cloud->device reset mode, During this period, no need any operation, just need 30~60s waiting(Up to your router and network signal strength) till appear connecting 100% complete,red led will stop flashing enter put out state, At this time,click the power button the led will change to blue color, the blue- red represents device working status..

Afer successfully adding the device, you can edit the device name and bind the application environment, click “save”, change into the main interface for customers ready to use

Remove device

Click the edit logo , go to the interface and choose remove Device’,and select disconnect and wipe date’, reset the device. Also you can press the power key more than 5 seconds till the LED flash slowly (around 1 time/3s)

Function introduction

a.Tap the ‘switch’ icon to achieve one-key switch on， switch off, remote on- off control

b.Click the ‘Schedule’ icon, users can set multiple automatic power on/power off according to their habits

c.When the plug is in the state of power on/Power off, click the ‘countdown’ icon , choice the right time(support 00 hours 00 minute to 23 hours 59minutes setting),click ‘ ’ the device will automatically power off or power on after reaching the point.
d. meanwhile, in the schedule interface, also you can enter the circulate and Random‘ ’ to set your private plan.

e.Click the ‘electricity’ icon to enter the power monitoring, provide users with visual power monitoring and statistics, also you can enter the operation monitoring to find all operating records of your device.

f. Support many third-party platforms resources access control, Back to the home interface， click the icon at right to enter the list of third-party support, users can selectively through the third-party platform authorization login access and voice control

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>