NEEWER RGB61 Mini Portable LED Light Instruction Manual
- June 5, 2024
- NEEWER
Table of Contents
NEEWER RGB61 Mini Portable LED Light
Copyright
2021 Shenzhen Neewer Technology Co., Ltd. All Rights Reserved. This document is the sole property of Shenzhen Neewer Technology, Ltd and shall not be, reproduced, transmitted, transcribed, stored in a retrieval system or translated in any form, by any means, without prior written permission from Shenzhen Neewer Technology Co., Ltd. Shenzhen Neewer Technology Co., Ltd reserves the right to change content in this instruction manual at any time and without prior notice.
Version Control
Safety tips
To prevent any damage to your product or the risk of personal injury, please read the instructions carefully and adhere to any safety precautions prior to using the product. Please retain the manual for future reference.
Product Overview
This product is a portable RGBwW fill light with a compact and clean look. It features 25Xultra-bright RGB LED bulbs, 18x2500K warm white, and 18X 8500K cool white LEDs. in addition to an integrated 2000mAh battery. It also boasts dual color temperature, color, and multiple scene modes.
Product illustration
Product illustration
Installation Instructions
Using the diffuser
When using the cold shoe interface to attach other equipment:
- If not using the diffuser, insert it directly into the cold shoe connector and turn the locking ring to lock it in place.
- If you wish to use the diffuser, the screw underneath the device should be moved back a little. This will create a small gap to accomodate the diffuser. Turn the locking ring to secure.
- We advise against using the soft light diffuser in the side cold shoe slot.
Using the cold shoe slot
When using the cold shoe slot to attach other equipment:
- Remove the soft light diffuser first, insert the cold shoe adapter into the groove, twist the locking ring to secure in place and re-attach the soft light diffuser. (as shown in the picture)
When removing the cold shoe adapter in order to install other equipment:
- Please remove the diffuser cover first, then loosen the locking ring to facilitate removal (see image).
User instructions
Charging
- Connect the power cable to a USB port (5V/2A). The will flash whilst charging and stop doing so when fully charged.
Powering on/off
- Long press the “ ” button to turn it on.
- Short press the “ ” button to change the settings.
Brightness adjustment
- In any mode, short press the “ ” button to change the level of brightness. With”>” pointing to the brightness value, adjust the setting using the and “ ” buttons.
Color temperature adjustment
- Short press the “M” button to switch to CCT mode.
- Short press the “ “button to toggle the “>” to the color temperature value on the screen, then short press to adjust the color temperature.
Hue adjustment
- Short press the ” M” button to Switch to HSI mode.
- Short press the “ ” button to toggle the “>” to the “H” value on the screen, then short press , “ “” “to adjust the hue.
Saturation adjustment
- Short press the “M ” button to switch to HSI mode.
- Short press the” ” button to toggle the “>” to the “S” value on the screen, then short press “ “” ” to adjust the saturation.
Scenes
- Short press the “M” button to switch to FX mode.
- Short press the “ ” button to toggle the “>” to the scene mode on the screen, then short press “ “” ” to enter this mode and select between the 1-20 scene modes available.
Important notes
- This fill light is not dustproof or waterproof.
- The video light is classed as a precision device. Please do not allow the lamp to fall to the ground, strike against other objects when transporting or subject it to a strong physical impact.
- Please do not obstruct the vents to prevent a rise in the device’s internal temperature which could result in a fire or accident.
- Do not look directly at the light to reduce the risk of visual impairment.
- Do not use the light within close proximity of volatile or inflammable materials and substances to prevent the risk of a fire.
- Be sure to turn off the power after using this fill light.
- After use, do not place the product in a carry case immediately as residual heat will reduce the life span of the LED bulbs. Please allow to cool down fully first.
- Please use a dry soft cloth to clean the fill light. You can use a cloth slightly moistened with some neutral detergent to remove stubborn dirt. Dry with a soft cloth
- Never use strong cleaning agents such as thinner, petrol or alcohol as these solvents can damage the protective layer of the surface.
Product Specifications
- Specifications and design are subject to change without notice.
UK
- Lingfeng Electronic (UK) Ltd
- address: International House, 10 Churchill Way, Cardiff, CF10 2HE,United Kingdom
EC
- NW Formations GmbH (for authorities only)
- Hoferstrasse 9B, 71636 Ludwigsburg, Germany
- Shenzhen Neewer Technology Co., Ltd.
- Room 1903, Block A, Lu Shan Building No. 3023 Chunfeng Rd Luo Hu District, Shenzhen Guangdong 518001, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>