NEEWER 10094897 Aluminum Alloy Backdrop Cloth Support System Instruction Manual
- June 3, 2024
- NEEWER
Table of Contents
NEEWER 10094897 Aluminum Alloy Backdrop Cloth Support System
Product illustrations
Sturdy and durable, this Neewer aluminum alloy backdrop cloth support system stand is perfectly adapted for both photography and video recording. Accurate and quick height and width adjustment allow the user to install and carry the stand with ease. The perfect partner for studio photography and video recording and the best choice to support your backdrop cloths.
Package Content
Assembly Instructions
Set up the backdrop cloth support Stand
- Turn the bottom knob of the tripod to loosen it and unfold the three legs of the tripod. Set the tripod legs to the required position and tighten the knob to secure. Release the retention latch of the tripod, pull out the extension bar and adjust it to the required height, then secure by pressing on the latch.
Hang the sandbag on the lower end of the tripod (as shown in the picture) to make the tripod more stable.
- Connect the crossbar
Press in the two metal tabs on the end of the crossbar C with your fingers to insert the crossbar C to the end of the crossbarA, then rotate crossbar C until the spring-mounted tabs pop out of the holes in crossbar A to lock the position. Install another crossbar C and crossbarB in sequence.
Remove the wing nut from the top bolt of the tripod and insert a spacer, align the bigger hole at one end of the crossbar A with the bolt and insert it. put another spacer, and turn the wing nut to secure.
Crossbar C can be adjusted according to the width you need. After connecting the crossbar C, align the hole at the end of the crossbar B with the bolt and insert crossbar B, and turn the wing nut to secure.
Crossbar A and B can only be installed on the stand on both sides. Crossbar C can only be connected in the middle position.
- Secure the backdrop cloth
Put one side of the backdrop cloth on the connected crossbar, clamp the backdrop cloth with the provided clamps to secure the fabric.
This kit does not include the cloth. Please purchase separately.
Safety Notes
- The support weight of the crossbar is limited. Please do not hang other heavy objects on it.
- Do not overtighten the screws and bolts to avoid difficulty in disassembly.
- Please disassemble this product and store it in its carry case if you don’t intend to use it for a long time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>