NEEWER PC24G USB Wireless Transmitter Instruction Manual
- June 4, 2024
- NEEWER
Table of Contents
NEEWER PC24G USB Wireless Transmitter
Connect your computer
Plug the 2.4G USB dongle into your computer’s USB port.
- The type of USB intertace of this product is USB-A.
Download the APP
windows
Enter the following URL (https://neewer.com/pages/download) into your web
browser and download and install “NEEWER APP live 2.4G”.
- When you install the “NEEWER live 2.4G” program, it is recommended that you manually add it as a trusted program if you encounter an error reported by the computer anti-virus Software.
- If your Windows 7 computer doesn’t have the. Net framework, it will automatically direct you to the.Net official website to download it.
MAC
Search for “NEEWER APP live 2.4G” in the App store on your phone to download
and open the App after installation.
Connect to the lights
Enter the APP. Please ensure the app channel is set to the same channel as
that of the light. This is essential to control the light using the APP.
- The ALL channel allows the user to control the light on all channels
Set the light channel
For the light models NL660 and NL480, please click “ before setting the
channel of the light.
- When using the APP to control NL660 or NL480, “ cannot be used.
FCC Statement (FCC ID: 2ANIV-PC246)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interterence that may cause undesired operation.
CAUTION: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interterence in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmtul interference to radio
communications. However, there is no guarantee that interterence will not
occur in a particular installation. It this equipment does cause harmful
interterence to radio or television reception, which carn be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is Connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for uncontrolled environments.
The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Copyright
2021 Shenzhen Neewer Technology Co., Ltd. All Rights Reserved. This document
is the sole property of Shenzhen Neewer Technology Co., Ltd and shall not be,
reproduced, transmitted, transcribed, stored in a retrieval system translated
in any form, by any means, without prior written permission from Shenzhen
Neewer Technology Co., Ltd. Shenzhen New Technology Co., Ltd reserves the
right to change the content in this instruction manual at any time and without
prior notice.
Version Control
UK REP
Lingfeng Electronic (UK) Ltd
International House, 10 Churchill Way, Cardiff,
CF10 2HE, United Kingdom
EC REP
NW Formations GmbH(for authorities only)
Hoferstrasse 9B, 71636 Ludwigsburg, Germany
Shenzhen Neewer Technology Co., Ltd.
Room 1903, Block A, Lu Shan Building No. 3023 Chunfeng Rd Luo Hu District,
Shenzhen Guangdong 518001, China